Re: [Elecraft] Fwd: WA6HHQ FDIM Talk Live Stream today 8:55 AM EDT

2015-05-14 Thread Ross Primrose

Live at: http://www.elecraft.com/manual/K3S%20Data%20Sheet%20rev%20A1.pdf &
http://www.elecraft.com/manual/K3S-FAQ%20rev%20C5%20customer.pdf

73, Ross N4RP

On 5/14/2015 9:16 AM, Fabio IZ4AFW / NZ1W wrote:

Probably they're uploading PDFs just now :)

Fabio
 IZ4AFW

2015-05-14 15:10 GMT+02:00 Ross Primrose >:


At http://www.elecraft.com/news.htm there are now links to a K3S
datasheet & FAQ, but they give a 404 error at this point...

73, Ross N4RP


On 5/14/2015 9:05 AM, Jim Miller wrote:

Not hitting the screen fully and no audio here.

jim ab3cv

On Thu, May 14, 2015 at 9:01 AM, W4CCS mailto:w4...@w4ccs.com>> wrote:

Anyone getting any audio..??

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net
] On Behalf Of Eric
Swartz - WA6HHQ, Elecraft
Sent: Thursday, May 14, 2015 8:43 AM
To: Elecraft Reflector
Subject: [Elecraft] Fwd: WA6HHQ FDIM Talk Live Stream
today 8:55 AM EDT


From: Eric Swartz mailto:n91...@cruzio.com>>
Date: May 14, 2015 at 8:41:34 AM EDT
To: Elecraft Reflector mailto:elecraft@mailman.qth.net>>
Subject: WA6HHQ FDIM Talk Live Stream today 8:55 AM EDT

I will be starting my DAYTON talk today in about 20
min - About 8:55 - 9

AM EDT.

For the live video stream see:
http://www.ustream.tv/channel/g4gxl-test

Fun times!

73,
Eric
elecraft.com 
_..._

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net


This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message
delivered to w4...@w4ccs.com 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net


This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message delivered to j...@jtmiller.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net


This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message delivered to n...@n4rp.com 



-- 
FCC Section 97.313(a) “At all times, an amateur station must use

the minimum transmitter power necessary to carry out the desired
communications.”

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to iz4...@iz4afw.org 





--
FCC Section 97.313(a) “At all times, an amateur station must use the minimum 
transmitter power necessary to carry out the desired communications.”

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Elecraft K3S Elecraft web page!

2015-05-14 Thread George via Elecraft
Check out the new Rig!

George NE2I




http://www.elecraft.com/manual/K3S%20Data%20Sheet%20rev%20A1.pdf
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Odd KX3 Behavior

2015-05-14 Thread David Anderson
This is changeable, but not intuitive to find.

>From the manual:
The KX3 can automatically offset the VFO frequency when you switch from SSB to 
CW mode, so other stations will hear the correct CW pitch. See MENU:CW WGHT for 
details.



Under the CW WGHT info on Page 37:

You are looking for the VFO offset setting :

Tap5to select automatic VFO offset on SSB/CW mode change (VFO OFS) or 
no offset (VFO NOR, default). Automatic offset is often used on 6 meters, where 
mixed-mode QSOs are necessary during fading. Note: Pitch matching will be more 
accurate if USB is paired with CW REV, and LSB with CW normal. 

Hope that helps!



73



David Anderson GM4JJJ



 


73

David Anderson GM4JJJ 

> On 14 May 2015, at 03:22, Joshua Gould  wrote:
> 
> I think I might have done something...
> 
> If I'm on 7.184 LSB, and I hit mode to go go CW, the radio goes to
> 7.184.540.  It only does this between SSB and CW.
> 
> What button did I push?
> 
> 72,
> Joshua Gould
> K8WXA
> EM89pn
> 
> KX3 # 7480
> 
> NAQCC # 7704
> OMISS # 9948
> 4sqrp # 990
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gm4...@yahoo.co.uk
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Elecraft K3S Elecraft web page!

2015-05-14 Thread Lyle Johnson

In a word, yes.

73,

Lyle KK7P



I wonder whether CW keying can be done via USB, like with the serial port
now.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Elecraft K3S Elecraft web page!

2015-05-14 Thread W4CCS
Thanks.. My order is in for the P3TX monitor.. 
W4CCS

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil
Wheeler
Sent: Thursday, May 14, 2015 11:23 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft K3S Elecraft web page!

The order page may provide that info: 
http://www.elecraft.com/elecraft_prod_list.htm#k3

Phil W7OX

On 5/14/15 8:11 AM, Ross Primrose wrote:
> It certainly seems that one could according to the FAQ, but only time 
> will tell.
>
> 73, Ross N4RP
>
> On 5/14/2015 11:03 AM, Bob wrote:
>> The addition of the soundcard for audio in/out is VERY exciting.
>>
>> Now my hope is that an existing K3 owner can purchase a new I/O card 
>> and get that feature as well.
>>
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to w4...@w4ccs.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] K3S and P3 TX Monitoring

2015-05-14 Thread Bill Frantz
The SVGA has always had a different display from the P3. For one 
thing, there is the decoded CW/digital at the bottom. Being able 
to TX monitor on the SVGA may be a future firmware upgrade for 
the SVGA.


73 Bill AE6JV


On 5/14/15 at 8:53 AM, eda...@law.du.edu (Dauer, Edward) wrote:


My only disappointment is that TX monitoring in the P3 won¹t show on the
SVGA monitor.  I wonder why?  I guess the SVGA isn¹t just a mirror of the
display . . . ?


-
Bill Frantz| Airline peanut bag: "Produced  | Periwinkle
(408)356-8506  | in a facility that processes   | 16345 
Englewood Ave
www.pwpconsult.com | peanuts and other nuts." - Duh | Los Gatos, 
CA 95032


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3S Quick Review

2015-05-14 Thread Phil Wheeler
Is the P3 TX monitor up at the order page?  So 
much there I may have missed it, Alan.


Phil W7OX

On 5/14/15 12:00 PM, Alan wrote:

On 05/14/2015 09:41 AM, Rick WA6NHC wrote:
...


It mentions the P3 TX monitor, so that's in RSN 
time frame (real soon
now).  BIG want, hoping for a 100/ 750 watt 
sensor for K3/100 plus

KPA500.  Then a 2k sensor for full legal power.


One point to emphasize about the P3 transmit 
monitor is that it is not dependent on the K3s - 
it works just fine with a K3.


The 2 kW sensor works well at lower power 
levels.  The modulation envelope display 
auto-scales and gives a good clean display down 
to a few watts with the 2 kW sensor.  You can 
set the "analog meter" full-scale to 20W, 120W, 
200W, 700W, 1200W or 2000W (and 1/10 those 
values for the 200W sensors).


Alan N1AL


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] K3s and K3S.

2015-05-14 Thread Joe Subich, W4TV


On 2015-05-14 3:16 PM, Walter Underwood wrote:

Use “K3’s” for multiple K3 transceivers.


That is not correct grammar.  "K3's" is a contraction meaning
"K3 is" or is the possessive as in "the K3's tuning knob".

If anything, one probably needs to use or spell out "multiple
K3 transceivers".

73,

   ... Joe, W4TV

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3S vs K3 - upgradability

2015-05-14 Thread Joe Subich, W4TV



On 2015-05-14 3:41 PM, Ross Primrose wrote:


I got the impression that new KBPF3As will have the necessary parts of
the mod, but as I recall when the mods were described a few weeks back
that there were changes that would also need to be made to the RF board
& KRX3.  Hopefully in the next few days there will be some clarification
on exactly what a K3 (no S) owner with no KBPF3s and the old synth(s)
needs to actually buy/mod to get on the bands below 500kHz...


To get on 630 meters no changes are likely to be needed.  The existing
KBPF3 is good down to 250 KHz or so and the internal noise is below the
"sky noise" there.  To get reasonable receive performance at 137 KHz,
both the filter and bypass mods (RF board/KRX3) will probably be needed.

I'm hoping that the bypass mods are a substantial portion of the "lower
RF and digital noise" in the new K3S RF board.  It would be a shame if
one needed to replace the K3 with a K3S because of a significant change
there.

73,

  ... Joe, W4TV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] K3s and K3S.

2015-05-14 Thread Phil Wheeler

Drat -- they should have called it a K3S :-)

Phil W7OX

On 5/14/15 12:56 PM, Alan wrote:

Yes, Miss Grammar would rap your knuckles for that.

The more interesting question is, what is the 
plural of K3s? K3ss?


:=)

Alan N1AL


On 05/14/2015 12:50 PM, Joe Subich, W4TV wrote:


On 2015-05-14 3:16 PM, Walter Underwood wrote:

Use “K3’s” for multiple K3 transceivers.


That is not correct grammar.  "K3's" is a 
contraction meaning
"K3 is" or is the possessive as in "the K3's 
tuning knob".


If anything, one probably needs to use or spell 
out "multiple

K3 transceivers".

73,

... Joe, W4TV


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3s question

2015-05-14 Thread Outlook.com via Elecraft

For reasons unknown to me, I am unable to view the K3s DATASHEET or FAQ.  
Looking at the review of the K3s photo I see a USB connector and an Ethernet 
connector labeled as rs232/P3.  Am I correct?  For those that can read the 
datasheet and/or FAQ, what does the USB do and what does the Ethernet connector 
do?  I am not a computer wizard so be gentle.

73, Steve, K4FJ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] KRX3 Question

2015-05-14 Thread Grant Youngman
Question .. Part no. is the same, but just to make sure ...

Is there something new about the KRX3 sub receiver listed with the K3S, or is 
it the same legacy component I currently have in my K3?

Thanks

Grant NQ5T

Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] KAT3A

2015-05-14 Thread Jerry Holcomb
I am the proud owner of K3/10  #8972, recently upgraded with the KPA3.

 

Two questions:

 

Has the KPA3 been upgraded to new PA finals? It would appear so with a
Mitsubishi device rather than the Toshiba.

 

Is the KAT3A compatible with the K3 as that is my next upgrade?

 

73 Jerry N0XWR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] KRX3 Question

2015-05-14 Thread Grant Youngman
I already have the new synth boards in my K3. Just would like to know if the 
receiver module itself is the same or if it's also been updated for the K3S. 

Grant NQ5T

Sent from my iPhone

> On May 14, 2015, at 6:31 PM, Phil Wheeler  wrote:
> 
> Perhaps the new synth board some of us have already installed in a K3?
> 
> Phil W7OX
> 
>> On 5/14/15 3:31 PM, Grant Youngman wrote:
>> Question .. Part no. is the same, but just to make sure ...
>> 
>> Is there something new about the KRX3 sub receiver listed with the K3S, or 
>> is it the same legacy component I currently have in my K3?
>> 
>> Thanks
>> 
>> Grant 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] Price of K3 before K3S

2015-05-14 Thread Johnny Siu
Can any of you advise what was the previous price for K3/10 kit and assembled?
I notice a price increase in KSYN3A upgrade kit from $190 to $220

73
Johnny VR2XMC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Eric's missing FDIM talk

2015-05-14 Thread Guy Olinger K2AV
I'll stick by what I said.

73, Guy K2AV

On Thu, May 14, 2015 at 9:25 PM, Gary Gregory  wrote:

> Guy
>
> The auto manufacturers advertise the new models well in advance of arrival
> on the showroom. They also offer substantial discounts or upgraded models.
>
> Perhaps your auto analagy might not be appropriate.
>
> Just sayin..
>
> Gary
> Vk1ZZ
> K3, KPA500-FT, KAT500-FT
> On 15/05/2015 11:20 AM, "Guy Olinger K2AV"  wrote:
>
>> >
>> > On 5/14/2015 9:27 AM, Gerald Manthey wrote:
>> >
>> >> ​So Basically my K3 is no longer in production. After saving up and buy
>> >> the
>> >> newest retirement rig, it is now out of production. This is a sad day.
>> >>
>> >
>> Gerald, did you ever buy a new car?   :>)
>>
>> What did you do when the next year's models came out?   :>)
>>
>> And that cost way more than a K3. And new car models come once a year.
>>
>> The K3 is the model since 2008. That's a long time for an incrementally
>> improved "same" model. Sooner or later there is no way to shoehorn a new
>> mod into the old chassis.
>>
>> My solution to the new model year car conundrum is to drive mine until it
>> has 250,000 miles on it and keep it maintained and in good repair. Ditto
>> on
>> the K3. Though I might later get a K3S and never take it out of the shack,
>> keep the K3 as I frequently go walkabout with the K3. The K3 has already
>> been pre-disastered and is the one to risk to the big bad world.
>>
>> 73, Guy
>>
>>
>>
>>
>> --
>> Sent via Gmail Mobile on my iPhone
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to vk1zzg...@gmail.com
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] The New K3S to the Old K3

2015-05-14 Thread William Levy
The amount of difference between both will only be noticed by those who
have the gear to measure it or an engineering degree.

The Collins KWM2A was modified continuously over it's 25 year or more build
life.
In those days there was always a final resistor that went in to the box
after all the tests were made and then after the resistor box was removed
the last resistor went in so the radio could meet it's measured specs.
Audio boxes were made the same way. So each was different because all those
5% resistors were all a bit different so each radio was always just a bit
different.

What I am trying to say is that there ain't much difference here beween the
3 and 3S.

However getting a transmit monitor and wattmeter on the PT3 is a vast
improvement for very little money.

I ordered a pair of new synthesizer board just so I could A/B two radios
and see if I could tell the difference. I will let you all know after a
test drive or two!


I started with crystals and DX60B so their is just no comparison to
incremental changes by Elecraft.

It is the radio of choice by the cognoscenti. Of this I have no doubt.

All best guys. N2WL Bill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] K3s question

2015-05-14 Thread Walter Underwood
Pretty sure I was using those around 1990 at HP, so 25 years. We had DB-25 
shells with a jack in the back.

wunder
K6WRU
CM87wj
http://observer.wunderwood.org/ (my blog)

On May 14, 2015, at 9:50 PM, David Christ  wrote:

> The of an RJ-45 jack for a serial port is hardly innovative nor new.  
> Lantronix has been using them for well over 15 years.  I will be interested 
> to see if Elecraft uses the same pin assignments.
> 
> Remember, RS-232 is not a physical connector specification.  It defines the 
> signals.
> 
> David K0LUM
> 
> 
> On May 14, 2015, at 11:10 PM, Don Wilhelm  wrote:
> 
>> That is an RJ-45 jack.  Even though the RJ-45 jack is also used for 
>> Ethernet, the fact that an RJ-45 jack is present does not state (or even 
>> imply) that it is an Ethernet connection - it is simply a compact 8 pin jack.
>> 
>> 73,
>> Don W3FPR
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wun...@wunderwood.org

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com