[Elecraft] [K3] - Sub receiver S-meter

[Al Lorona]

When B SET is pressed the S-meter is tied to the sub receiver. But how does one 
go about calibrating the sub rx's S-meter? Is it even possible? The User Guide 
seems to imply so.


Al  W6LX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Modulation Envelope

[Richard Thorpe]

Should the modulation envelope created by the P3TXMON be used to adjust the 
mike gain and compression?  

K6CG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker SP3 Video

[ac5p]

Sounds good and like maybe a peak on CW pitch around 550Hz?    Have you varied 
the sidetone pitch at a fixed  level to check response?
Mike  AC5P 


 On Friday, November 6, 2015 3:27 PM, Steve Ellington  
wrote:
   

 I just did a little video on the SP3.

https://www.youtube.com/watch?v=I2EmW46zgDw

Steve N4LQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to a...@sbcglobal.net


  
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker SP3 Video

[Steve Ellington]

Yes, using a sound pressure meter I can see a peak around 570 and one down
around 330 or so . These are only about 3 db variations however.
Setting the speaker on the desktop makes a *HUGE difference* in
loudness...Maybe 10 db or so. The reflection from the surface helps greatly
and this is true of most speakers. Setting it on a shelf totally wrecks
everything.

On Fri, Nov 6, 2015 at 7:24 PM,  wrote:

> Sounds good and like maybe a peak on CW pitch around 550Hz?Have you
> varied the sidetone pitch at a fixed  level to check response?
>
> Mike  AC5P
>
>
>
> On Friday, November 6, 2015 3:27 PM, Steve Ellington 
> wrote:
>
>
> I just did a little video on the SP3.
>
> https://www.youtube.com/watch?v=I2EmW46zgDw
>
> Steve N4LQ
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to a...@sbcglobal.net
>
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker SP3 Video

[Robin Moseley]

NO!
do not make the  K3 USB codec a default device for audio or communications.

That makes windows sounds  use the  K3s USB codec play  beeps etc.

Robin G1MHU

-Original Message- 
From: Steve Ellington

Sent: Saturday, November 7, 2015 12:39 AM
To: Ian
Cc: Elecraft Reflector
Subject: Re: [Elecraft] Speaker SP3 Video

​Go to your audio settings...Playback devices.Make your PC's speakers
AND the ​K3S's USB Codec device DEFAULT devicesBoth should work now.

Steve N4LQ

On Fri, Nov 6, 2015 at 7:34 PM, Ian  wrote:


I have to pull the USB cable from my K3S to my laptop so that the laptop
speakers are re-enabled.
73, Ian N8IK


-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil
Wheeler
Sent: Friday, November 6, 2015 19:12
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Speaker SP3 Video

You mean you don't watch it on your P3, Tom? :-)

73, Phil W7OX

On 11/6/15 3:52 PM, Chester Alderman wrote:
> WHY???
>
> My K3 has nothing to do with trying to listen to YouTube audio...that
> I know of???
>
> Tom - W4BQF
>
>
> -Original Message-
> From: Ian [mailto:ik7...@verizon.net]
> Sent: Friday, November 6, 2015 5:06 PM
> To: 'Anthony Scandurra'; 'Chester Alderman'
> Cc: 'Elecraft Reflector'
> Subject: RE: [Elecraft] Speaker SP3 Video
>
> Unplug the USB cable from your K3  :)
> 73, Ian N8IK
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> Anthony Scandurra
> Sent: Friday, November 6, 2015 16:51
> To: Chester Alderman 
> Cc: Elecraft Reflector 
> Subject: Re: [Elecraft] Speaker SP3 Video
>
> Worked fine here...using Chrome 46.
>
> Nice demo, Steve!
>
> 73, Tony K4QE
>
> On Fri, Nov 6, 2015 at 4:43 PM, Chester Alderman
> 
> wrote:
>
>> No audio on your video?
>>
>> Tom - W4BQF
>>
>>
>>
>> -Original Message-
>> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
>> Steve Ellington
>> Sent: Friday, November 6, 2015 4:26 PM
>> To: elecraft@mailman.qth.net
>> Subject: [Elecraft] Speaker SP3 Video
>>
>> I just did a little video on the SP3.
>>
>> https://www.youtube.com/watch?v=I2EmW46zgDw
>>
>> Steve N4LQ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message
delivered to ik7...@verizon.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to steven...@gmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to g1...@hotmail.com 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [elecraft] PX3 Firmware 1.39 General Release

[JE0LFI]

Dear n6hz Paul

Setting value: REF, Scale, Waterfall high etc could not save correctly(only
40m?).

Best regards,

JE0LFI nakamura



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/PX3-Firmware-1-39-General-Release-tp7610017p7610078.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker SP3 Video

[Chester Alderman]

WHY???

My K3 has nothing to do with trying to listen to YouTube audio...that I know
of???

Tom - W4BQF


-Original Message-
From: Ian [mailto:ik7...@verizon.net] 
Sent: Friday, November 6, 2015 5:06 PM
To: 'Anthony Scandurra'; 'Chester Alderman'
Cc: 'Elecraft Reflector'
Subject: RE: [Elecraft] Speaker SP3 Video

Unplug the USB cable from your K3  :)
73, Ian N8IK 


-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Anthony Scandurra
Sent: Friday, November 6, 2015 16:51
To: Chester Alderman 
Cc: Elecraft Reflector 
Subject: Re: [Elecraft] Speaker SP3 Video

Worked fine here...using Chrome 46.

Nice demo, Steve!

73, Tony K4QE

On Fri, Nov 6, 2015 at 4:43 PM, Chester Alderman 
wrote:

> No audio on your video?
>
> Tom - W4BQF
>
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of 
> Steve Ellington
> Sent: Friday, November 6, 2015 4:26 PM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] Speaker SP3 Video
>
> I just did a little video on the SP3.
>
> https://www.youtube.com/watch?v=I2EmW46zgDw
>
> Steve N4LQ
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to 
> alderm...@windstream.net
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to 
> anthony.scandu...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ik7...@verizon.net


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker SP3 Video

[Phil Wheeler]

You mean you don't watch it on your P3, Tom? :-)

73, Phil W7OX

On 11/6/15 3:52 PM, Chester Alderman wrote:

WHY???

My K3 has nothing to do with trying to listen to YouTube audio...that I know
of???

Tom - W4BQF


-Original Message-
From: Ian [mailto:ik7...@verizon.net]
Sent: Friday, November 6, 2015 5:06 PM
To: 'Anthony Scandurra'; 'Chester Alderman'
Cc: 'Elecraft Reflector'
Subject: RE: [Elecraft] Speaker SP3 Video

Unplug the USB cable from your K3  :)
73, Ian N8IK


-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Anthony Scandurra
Sent: Friday, November 6, 2015 16:51
To: Chester Alderman 
Cc: Elecraft Reflector 
Subject: Re: [Elecraft] Speaker SP3 Video

Worked fine here...using Chrome 46.

Nice demo, Steve!

73, Tony K4QE

On Fri, Nov 6, 2015 at 4:43 PM, Chester Alderman 
wrote:


No audio on your video?

Tom - W4BQF



-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Steve Ellington
Sent: Friday, November 6, 2015 4:26 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Speaker SP3 Video

I just did a little video on the SP3.

https://www.youtube.com/watch?v=I2EmW46zgDw

Steve N4LQ


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 QSK CW Audio Dropouts

[Wayne Burdick]

We're talking about two different things.

What OK1RP may be hearing is the ATU switching its relays when he first 
transmits in a band segment that requires new LC settings. The firmware 
attempts to do that between CW elements (in RX mode). This should be extremely 
rare. (If it's happening more frequently, it could be related to particular 
combination of AGC and QSK menu settings along with high QRM/QRN on a given 
frequency. I would try selecting "OLD QSK" or "NEW QSK" to see if that has any 
impact, and/or increase the AGC THR value.)

The PA temperature anomaly reported earlier should also be extremely rare, and 
in fact no one had even mentioned it in years. Nothing has changed in this 
firmware recently. But I'm working on a firmware improvement for that and will 
discuss it later after testing.

Wayne
N6KR


On Nov 6, 2015, at 9:45 AM, Don Wilhelm  wrote:

> Petr,
> 
> Yes, Wayne' explanation was that the PA Temp is sampled between characters in 
> CW, so if one uses QSK and listens closely, you can hear the gaps in the 
> audio when the K3 returns to receive.
> 
> You may find a change in a firmware upgrade coming soon, but I don't know 
> when.
> 
> 73,
> Don W3FPR
> 
> On 11/6/2015 12:05 PM, ok1rp wrote:
>> Hi all,
>> 
>> few days ago I realized on K3 (using latest MCU/FPF) weird receive audio
>> dropout problem.
>> It happends during QSK CW operation and it is hearable in audio in between
>> TX periods > time to time but it is repeatable. I did not heard these
>> dropouts during receiving only mode...
>> Simply when I am listenning on K3 all is ok but when I am starting to call
>> CW or I am making QSO then dropouts in audio are readable in between TX
>> periods with QSK.
>> 
>> Is there someone with similar effect please?
>> Is there chance that it is linked to K3S weird transmit audio dropout
>> problem discussed in different threat?
>> 
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker SP3 Video

[Ian]

Thanks Robin,
I learn something new every day!  So I made my laptop the "playback device" 
default.  The K3S "device" just says "ready".  Should I also make the laptop 
microphone the "recording device" default?
73, Ian N8IK 


-Original Message-
From: Robin Moseley [mailto:g1...@hotmail.com] 
Sent: Friday, November 6, 2015 19:56
To: Steve Ellington ; Ian 
Cc: Elecraft Reflector 
Subject: Re: [Elecraft] Speaker SP3 Video

NO!
do not make the  K3 USB codec a default device for audio or communications.

That makes windows sounds  use the  K3s USB codec play  beeps etc.

Robin G1MHU

-Original Message-
From: Steve Ellington
Sent: Saturday, November 7, 2015 12:39 AM
To: Ian
Cc: Elecraft Reflector
Subject: Re: [Elecraft] Speaker SP3 Video

​Go to your audio settings...Playback devices.Make your PC's speakers AND 
the ​K3S's USB Codec device DEFAULT devicesBoth should work now.

Steve N4LQ

On Fri, Nov 6, 2015 at 7:34 PM, Ian  wrote:

> I have to pull the USB cable from my K3S to my laptop so that the 
> laptop speakers are re-enabled.
> 73, Ian N8IK
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of 
> Phil Wheeler
> Sent: Friday, November 6, 2015 19:12
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Speaker SP3 Video
>
> You mean you don't watch it on your P3, Tom? :-)
>
> 73, Phil W7OX
>
> On 11/6/15 3:52 PM, Chester Alderman wrote:
> > WHY???
> >
> > My K3 has nothing to do with trying to listen to YouTube 
> > audio...that I know of???
> >
> > Tom - W4BQF
> >
> >
> > -Original Message-
> > From: Ian [mailto:ik7...@verizon.net]
> > Sent: Friday, November 6, 2015 5:06 PM
> > To: 'Anthony Scandurra'; 'Chester Alderman'
> > Cc: 'Elecraft Reflector'
> > Subject: RE: [Elecraft] Speaker SP3 Video
> >
> > Unplug the USB cable from your K3  :) 73, Ian N8IK
> >
> >
> > -Original Message-
> > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> > Anthony Scandurra
> > Sent: Friday, November 6, 2015 16:51
> > To: Chester Alderman 
> > Cc: Elecraft Reflector 
> > Subject: Re: [Elecraft] Speaker SP3 Video
> >
> > Worked fine here...using Chrome 46.
> >
> > Nice demo, Steve!
> >
> > 73, Tony K4QE
> >
> > On Fri, Nov 6, 2015 at 4:43 PM, Chester Alderman
> > 
> > wrote:
> >
> >> No audio on your video?
> >>
> >> Tom - W4BQF
> >>
> >>
> >>
> >> -Original Message-
> >> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> >> Steve Ellington
> >> Sent: Friday, November 6, 2015 4:26 PM
> >> To: elecraft@mailman.qth.net
> >> Subject: [Elecraft] Speaker SP3 Video
> >>
> >> I just did a little video on the SP3.
> >>
> >> https://www.youtube.com/watch?v=I2EmW46zgDw
> >>
> >> Steve N4LQ
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message
> delivered to ik7...@verizon.net
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to steven...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to g1...@hotmail.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker SP3 Video

[Ian]

I have to pull the USB cable from my K3S to my laptop so that the laptop
speakers are re-enabled.
73, Ian N8IK 


-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil
Wheeler
Sent: Friday, November 6, 2015 19:12
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Speaker SP3 Video

You mean you don't watch it on your P3, Tom? :-)

73, Phil W7OX

On 11/6/15 3:52 PM, Chester Alderman wrote:
> WHY???
>
> My K3 has nothing to do with trying to listen to YouTube audio...that 
> I know of???
>
> Tom - W4BQF
>
>
> -Original Message-
> From: Ian [mailto:ik7...@verizon.net]
> Sent: Friday, November 6, 2015 5:06 PM
> To: 'Anthony Scandurra'; 'Chester Alderman'
> Cc: 'Elecraft Reflector'
> Subject: RE: [Elecraft] Speaker SP3 Video
>
> Unplug the USB cable from your K3  :)
> 73, Ian N8IK
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of 
> Anthony Scandurra
> Sent: Friday, November 6, 2015 16:51
> To: Chester Alderman 
> Cc: Elecraft Reflector 
> Subject: Re: [Elecraft] Speaker SP3 Video
>
> Worked fine here...using Chrome 46.
>
> Nice demo, Steve!
>
> 73, Tony K4QE
>
> On Fri, Nov 6, 2015 at 4:43 PM, Chester Alderman 
> 
> wrote:
>
>> No audio on your video?
>>
>> Tom - W4BQF
>>
>>
>>
>> -Original Message-
>> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of 
>> Steve Ellington
>> Sent: Friday, November 6, 2015 4:26 PM
>> To: elecraft@mailman.qth.net
>> Subject: [Elecraft] Speaker SP3 Video
>>
>> I just did a little video on the SP3.
>>
>> https://www.youtube.com/watch?v=I2EmW46zgDw
>>
>> Steve N4LQ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ik7...@verizon.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Elecraft CW Net Cancellation notice

[kev...@coho.net]

Due to prior use by the many contesters in this weekend's CW Sweepstakes 
the Elecraft CW Net will be cancelled until the following week.

GL  & 73,
Kevin.  KD5ONS


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker SP3 Video

[Steve Ellington]

​Go to your audio settings...Playback devices.Make your PC's speakers
AND the ​K3S's USB Codec device DEFAULT devicesBoth should work now.

Steve N4LQ

On Fri, Nov 6, 2015 at 7:34 PM, Ian  wrote:

> I have to pull the USB cable from my K3S to my laptop so that the laptop
> speakers are re-enabled.
> 73, Ian N8IK
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil
> Wheeler
> Sent: Friday, November 6, 2015 19:12
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Speaker SP3 Video
>
> You mean you don't watch it on your P3, Tom? :-)
>
> 73, Phil W7OX
>
> On 11/6/15 3:52 PM, Chester Alderman wrote:
> > WHY???
> >
> > My K3 has nothing to do with trying to listen to YouTube audio...that
> > I know of???
> >
> > Tom - W4BQF
> >
> >
> > -Original Message-
> > From: Ian [mailto:ik7...@verizon.net]
> > Sent: Friday, November 6, 2015 5:06 PM
> > To: 'Anthony Scandurra'; 'Chester Alderman'
> > Cc: 'Elecraft Reflector'
> > Subject: RE: [Elecraft] Speaker SP3 Video
> >
> > Unplug the USB cable from your K3  :)
> > 73, Ian N8IK
> >
> >
> > -Original Message-
> > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> > Anthony Scandurra
> > Sent: Friday, November 6, 2015 16:51
> > To: Chester Alderman 
> > Cc: Elecraft Reflector 
> > Subject: Re: [Elecraft] Speaker SP3 Video
> >
> > Worked fine here...using Chrome 46.
> >
> > Nice demo, Steve!
> >
> > 73, Tony K4QE
> >
> > On Fri, Nov 6, 2015 at 4:43 PM, Chester Alderman
> > 
> > wrote:
> >
> >> No audio on your video?
> >>
> >> Tom - W4BQF
> >>
> >>
> >>
> >> -Original Message-
> >> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> >> Steve Ellington
> >> Sent: Friday, November 6, 2015 4:26 PM
> >> To: elecraft@mailman.qth.net
> >> Subject: [Elecraft] Speaker SP3 Video
> >>
> >> I just did a little video on the SP3.
> >>
> >> https://www.youtube.com/watch?v=I2EmW46zgDw
> >>
> >> Steve N4LQ
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message
> delivered to ik7...@verizon.net
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to steven...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker SP3 Video

[Steve Ellington]

NawThe other guy had a point about windows sounds getting broadcast by
the K3If it works, don't fix!

On Fri, Nov 6, 2015 at 8:42 PM, Ian  wrote:

> Thanks Robin,
> I learn something new every day!  So I made my laptop the "playback
> device" default.  The K3S "device" just says "ready".  Should I also make
> the laptop microphone the "recording device" default?
> 73, Ian N8IK
>
>
> -Original Message-
> From: Robin Moseley [mailto:g1...@hotmail.com]
> Sent: Friday, November 6, 2015 19:56
> To: Steve Ellington ; Ian 
> Cc: Elecraft Reflector 
> Subject: Re: [Elecraft] Speaker SP3 Video
>
> NO!
> do not make the  K3 USB codec a default device for audio or communications.
>
> That makes windows sounds  use the  K3s USB codec play  beeps etc.
>
> Robin G1MHU
>
> -Original Message-
> From: Steve Ellington
> Sent: Saturday, November 7, 2015 12:39 AM
> To: Ian
> Cc: Elecraft Reflector
> Subject: Re: [Elecraft] Speaker SP3 Video
>
> ​Go to your audio settings...Playback devices.Make your PC's speakers
> AND the ​K3S's USB Codec device DEFAULT devicesBoth should work now.
>
> Steve N4LQ
>
> On Fri, Nov 6, 2015 at 7:34 PM, Ian  wrote:
>
> > I have to pull the USB cable from my K3S to my laptop so that the
> > laptop speakers are re-enabled.
> > 73, Ian N8IK
> >
> >
> > -Original Message-
> > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> > Phil Wheeler
> > Sent: Friday, November 6, 2015 19:12
> > To: elecraft@mailman.qth.net
> > Subject: Re: [Elecraft] Speaker SP3 Video
> >
> > You mean you don't watch it on your P3, Tom? :-)
> >
> > 73, Phil W7OX
> >
> > On 11/6/15 3:52 PM, Chester Alderman wrote:
> > > WHY???
> > >
> > > My K3 has nothing to do with trying to listen to YouTube
> > > audio...that I know of???
> > >
> > > Tom - W4BQF
> > >
> > >
> > > -Original Message-
> > > From: Ian [mailto:ik7...@verizon.net]
> > > Sent: Friday, November 6, 2015 5:06 PM
> > > To: 'Anthony Scandurra'; 'Chester Alderman'
> > > Cc: 'Elecraft Reflector'
> > > Subject: RE: [Elecraft] Speaker SP3 Video
> > >
> > > Unplug the USB cable from your K3  :) 73, Ian N8IK
> > >
> > >
> > > -Original Message-
> > > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> > > Anthony Scandurra
> > > Sent: Friday, November 6, 2015 16:51
> > > To: Chester Alderman 
> > > Cc: Elecraft Reflector 
> > > Subject: Re: [Elecraft] Speaker SP3 Video
> > >
> > > Worked fine here...using Chrome 46.
> > >
> > > Nice demo, Steve!
> > >
> > > 73, Tony K4QE
> > >
> > > On Fri, Nov 6, 2015 at 4:43 PM, Chester Alderman
> > > 
> > > wrote:
> > >
> > >> No audio on your video?
> > >>
> > >> Tom - W4BQF
> > >>
> > >>
> > >>
> > >> -Original Message-
> > >> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> > >> Steve Ellington
> > >> Sent: Friday, November 6, 2015 4:26 PM
> > >> To: elecraft@mailman.qth.net
> > >> Subject: [Elecraft] Speaker SP3 Video
> > >>
> > >> I just did a little video on the SP3.
> > >>
> > >> https://www.youtube.com/watch?v=I2EmW46zgDw
> > >>
> > >> Steve N4LQ
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message
> > delivered to ik7...@verizon.net
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to steven...@gmail.com
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to g1...@hotmail.com
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] P3 goes to different band when control knob is tapped.

[Gary Smith]

I must have hit something inadvertently 
because my P3 is exhibiting a new 
behaviour I haven't experienced before; 
Lets say I'm on 80M and switch to 160M. 
The K3 is now on 160M, the digital markers 
on the P3 show 160M frequencies. I tap the 
marker A button to highlight Green, I 
adjust it to a desired signal & when I 
push the control knob, it puts me back to 
80 meters or at least to a different band.

Whatever the cause, I have had it happen 
repeatedly lately, not every time but 
often enough I've become wary of where the 
P3 will send me. 

Since this is a new behaviour, it's either 
the result of my having changed a setting 
or something to do maybe with a recent 
firmware update?

Idears?

73,

Gary
KA1J

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 QSK CW Audio Dropouts

[Vic Rosenthal]

I tried to hear this and didn't succeed. And I'm the world's most finicky QSK 
user.

Vic 4X6GP/K2VCO 

> On 7 Nov 2015, at 3:04 AM, Wayne Burdick  wrote:
> 
> We're talking about two different things.
> 
> What OK1RP may be hearing is the ATU switching its relays when he first 
> transmits in a band segment that requires new LC settings. The firmware 
> attempts to do that between CW elements (in RX mode). This should be 
> extremely rare. (If it's happening more frequently, it could be related to 
> particular combination of AGC and QSK menu settings along with high QRM/QRN 
> on a given frequency. I would try selecting "OLD QSK" or "NEW QSK" to see if 
> that has any impact, and/or increase the AGC THR value.)
> 
> The PA temperature anomaly reported earlier should also be extremely rare, 
> and in fact no one had even mentioned it in years. Nothing has changed in 
> this firmware recently. But I'm working on a firmware improvement for that 
> and will discuss it later after testing.
> 
> Wayne
> N6KR
> 
> 
>> On Nov 6, 2015, at 9:45 AM, Don Wilhelm  wrote:
>> 
>> Petr,
>> 
>> Yes, Wayne' explanation was that the PA Temp is sampled between characters 
>> in CW, so if one uses QSK and listens closely, you can hear the gaps in the 
>> audio when the K3 returns to receive.
>> 
>> You may find a change in a firmware upgrade coming soon, but I don't know 
>> when.
>> 
>> 73,
>> Don W3FPR
>> 
>>> On 11/6/2015 12:05 PM, ok1rp wrote:
>>> Hi all,
>>> 
>>> few days ago I realized on K3 (using latest MCU/FPF) weird receive audio
>>> dropout problem.
>>> It happends during QSK CW operation and it is hearable in audio in between
>>> TX periods > time to time but it is repeatable. I did not heard these
>>> dropouts during receiving only mode...
>>> Simply when I am listenning on K3 all is ok but when I am starting to call
>>> CW or I am making QSO then dropouts in audio are readable in between TX
>>> periods with QSK.
>>> 
>>> Is there someone with similar effect please?
>>> Is there chance that it is linked to K3S weird transmit audio dropout
>>> problem discussed in different threat?
>> 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 Yamaha CM500 vs Koss SB40

[Ian White]

Dave Hachadorian, K6LL, wrote:

>As a last resort, you can tape pretty much any old electret
>element to the mic boom and run a separate mic line from the
>element.  Mouser has a good selection of electret elements, many
>under $5.  My CM500 microphone element failed, and I replaced it
>with an electret element out of an old toy that I found laying
>around the house.  It sounds fine.
>
Probably any half-decent electret element will sound fine too. If the
frequency response is reasonably level and the sensitivity is  about the
same as other electrets - in other words, if there's nothing "wrong" or
"unusual" about it - then the K3 will manage the rest.

Over the past 7 years I've had very good results with the Koss CS-100, a
lightweight on-ear computer headset with the usual electret microphone.
That headset was originally purchased for Skype but was found to work
very well indeed with the K3 - not only for my own voice but also for my
wife and for guest operators. As a result, these headsets have
proliferated around our household and also throughout the radio club.

Still preferring closed-cup headphones for my own use, about two years
ago I switched to the Koss CM-45. The electret microphone is essentially
identical to the CS-100, so operators can freely swap headsets without
needing to change any microphone or EQ settings.

>The SB45 headset has an electret element, but it is not the same
>comfortable headphone arrangement as the CM-500.
>
Headphone comfort is a very individual thing. I have used the Koss SB-45
for about two years now with no discomfort over many long hours; on the
other hand, Heil headphones hurt my ears within ten minutes. The CM-500
I have never tried, as it's not readily available in Europe.

So, in what way is the headphone arrangement "different" between the
SB45 and the CM-500? 


73 from Ian GM3SEK

(Please excuse any delayed replies over the next few days - we're having
phone-line problems.)


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] MAB boards for the K2?

[Ken Chandler]

Doug 
I would like a MAB full kit board!

Cheers

Ken.. G0ORH ..K2 /100 sn 5877

Sent from my iPad


> On 5 Nov 2015, at 21:53, Robert G Strickland  wrote:
> 
> I'd like one.
> 
> robert
> 
>> On 11/4/2015 22:55, Doug Shields wrote:
>> Rueben,
>>  I brokered the last bunch of MAB boards.  All have been sold.  If there
>> is interest, we can make another run of boards.  I think I have a few parts
>> left over but we can come up with full kits if anyone is interested in
>> those.  If you are interested in boards or kits let me know.
>> 
>> Doug  W4DAS
>> 
>> -Original Message-
>> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Reuben
>> Popp
>> Sent: Wednesday, November 04, 2015 4:07 PM
>> To: elecraft@mailman.qth.net
>> Subject: [Elecraft] MAB boards for the K2?
>> 
>> Does anyone know if any of the MAB board are still floating out there or
>> does anyone have a spare for sale?
>> 
>> http://www.genebitsystems.com/david/K2MiscAccessoryBoard/index.htm
>> 
>> Thanks in advance as always, and 73
>> Reuben
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rc...@verizon.net
> 
> -- 
> Robert G Strickland, PhD ABPH - KE2WY
> rc...@verizon.net.usa
> Syracuse, New York, USA
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to g0...@sky.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] MAB boards for the K2?

[Mauricio Fernandez via Elecraft]

 blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px 
#715FFA solid !important;  padding-left:1ex !important; background-color:white 
!important; }  Put me in the listRegardsKP4le


Sent from Yahoo Mail for iPhone


On Friday, November 6, 2015, 5:18 AM, Ken Chandler  wrote:

Doug 
I would like a MAB full kit board!

Cheers

Ken.. G0ORH ..K2 /100 sn 5877

Sent from my iPad


> On 5 Nov 2015, at 21:53, Robert G Strickland  wrote:
> 
> I'd like one.
> 
> robert
> 
>> On 11/4/2015 22:55, Doug Shields wrote:
>> Rueben,
>>      I brokered the last bunch of MAB boards.  All have been sold.  If there
>> is interest, we can make another run of boards.  I think I have a few parts
>> left over but we can come up with full kits if anyone is interested in
>> those.  If you are interested in boards or kits let me know.
>> 
>> Doug  W4DAS
>> 
>> -Original Message-
>> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Reuben
>> Popp
>> Sent: Wednesday, November 04, 2015 4:07 PM
>> To: elecraft@mailman.qth.net
>> Subject: [Elecraft] MAB boards for the K2?
>> 
>> Does anyone know if any of the MAB board are still floating out there or
>> does anyone have a spare for sale?
>> 
>> http://www.genebitsystems.com/david/K2MiscAccessoryBoard/index.htm
>> 
>> Thanks in advance as always, and 73
>> Reuben
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rc...@verizon.net
> 
> -- 
> Robert G Strickland, PhD ABPH - KE2WY
> rc...@verizon.net.usa
> Syracuse, New York, USA
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to g0...@sky.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to mauriciof...@yahoo.com

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] having problems connecting my K-3 to Ham Radio Deluxe

[John Weber]

Here  is a general overview of my problem


K-3 radio, new Lenovo desk top with windows 10 operating system


HRD version 6.3 (latest Software )


Elecraft KUSB black cable 


Please note that I operated the radio with HRD in the past using an old 
computer using windows 7 but that computer has gone to the grave yard.


I have contacted HRD , Lenovo & Elecraft to trouble shoot the problem 


When I connect the radio thru the KUSB port to the computer and load the HRD 
program 

I get a screen indicating that the program can not find the radio.

Elecraft indicates that the drivers in the computer operating system are not 
the drivers needed to operate the radio, so I down loaded the driver that 
Elecraft indicated and still can not connect.

I Used an old computer with a Windows Vista operating system and connected it 
to the radio with HRD 6.3 and it operated correctly!!


 


Has any one had this problem ??

And what is the solution !

Please advise 


John WA2C






Sent from Windows Mail
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 #7504 For Sale

[Ron Durie]

I am selling my K3 to build a K3S.

This is the 5th K3 I have built.  Nonsmoker; in Mint, Like New condition.  I
built this K3 on 06/15/2013.  
When I build K3s I treat every pin with Caig DeOxit ProGold solution to
prevent intermittent contacts and pin oxidation. 
It has been my primary rig and has never had any issues. 
Two new KSYN3A Synthesizers are installed.  All Manuals included.
Even the main and Sub tuning Knobs have never been used.  I used the 73cnc
knobs. 

It includes every option except the 2meter option. 
 
It includes the KTCXO3-1 option and the external reference input option.
Main Receiver filters: FM;  AM;  2.8 KHz 8 pole;  2.7 KHz 5 pole;  500 Hz
8pole. 
Sub Receiver filter: 2.7 KHz 5 pole.

$3300 plus shipping to CONUS only.

Contact me direct at: WB4OOA at gmail.com  

Ron Durie 
(704) 843-3681




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3S Transmit Audio Dropouts

[Bob McGraw - K4TAX]

Thanks Don.   I suppose I didn't see Wayne's response.  In one way it is 
nice to know it is not "radio unique".  In my examination, it appeared 
to be a firmware issue, likely affecting all radios. Easy solution however.


73
Bob, K4TAX
K3S s/n 10163

On 11/6/2015 7:47 AM, Don Wilhelm wrote:
Yes, Wayne answered a few days ago.  It is caused by the way he 
samples the PA Temperature.

It will be modified in an upcoming firmware release.

73,
Don W3FPR 



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] having problems connecting my K-3 to Ham Radio Deluxe

[Bob McGraw - K4TAX]

I tried HRD 6.0 and dumped it.  I find there are issues with Windows 10 
and HRD 6.0 that have not been resolved.


I do run Windows 10 and other applications,  i.e.  HRD 5.0/DM-780, 
FLDIGI, WSJT-X and others very successfully with the K3S and the USB to 
radio connection.  So, if it runs with HRD 5.0 and not HRD 6.0, using 
the same computer, same operating system, same cable, same radio, I 
strongly suspect the issue is within HRD 6.0.


73
Bob, K4TAX
K3S s/n 10163
 


On 11/6/2015 7:44 AM, John Weber wrote:

When I connect the radio thru the KUSB port to the computer and load the HRD 
program

I get a screen indicating that the program can not find the radio.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 Yamaha CM500 vs Koss SB40

[Don Wilhelm]

Tom,

I do not have the specifications for the Koss SB40, but all the ad 
statements say it has a dynamic microphone element.
What happens if you turn off the bias?  If you get no audio, then it is 
an electret element, but if you do get audio out of it, it is dynamic.

Operating a dynamic microphone with bias turned on will create distortion.

73,
Don W3FPR

On 11/5/2015 8:40 PM, cx...@4email.net wrote:


So, what is the difference between these two headsets and what can I do
to properly use the SB40?

BTW, the Buddipole/CM500/K3 combo was great...due to proximity to
building, could only use BP on 10 and 15m...worked over 600Qs in 3 hours
on 10m on Sunday pm..great fun.

Suggestions for using the SB40 w/K3?




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 Yamaha CM500 vs Koss SB40

[Bob McGraw - K4TAX]

As a general rule, if you measure the DC resistance at the connector on 
the mike and it is less than 2K ohms, it is likely dynamic.  If it is 
10K or more, it is likely an electret element.If it is near infinity 
then likely there is a DC blocking capacitor in the circuit.   The R 
values have nothing to do with impedance, as they are just DC resistance 
values.


The electret element requires bias.  They dynamic will likely distort 
when bias is turned on.


73
Bob, K4TAX



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] having problems connecting my K-3 to Ham Radio Deluxe

[ae4pb]

What issues are you experiencing? I'm running the latest HRD with Win 10 and
not having any issues. Are you running any type of port multiplexing
software? I don't recall the name, however, one popular one definitely isn't
stable on win10.

Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.


-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob
McGraw - K4TAX
Sent: Friday, November 06, 2015 9:31 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] having problems connecting my K-3 to Ham Radio
Deluxe

I tried HRD 6.0 and dumped it.  I find there are issues with Windows 10 and
HRD 6.0 that have not been resolved.

I do run Windows 10 and other applications,  i.e.  HRD 5.0/DM-780, FLDIGI,
WSJT-X and others very successfully with the K3S and the USB to radio
connection.  So, if it runs with HRD 5.0 and not HRD 6.0, using the same
computer, same operating system, same cable, same radio, I strongly suspect
the issue is within HRD 6.0.

73
Bob, K4TAX
K3S s/n 10163
  

On 11/6/2015 7:44 AM, John Weber wrote:
> When I connect the radio thru the KUSB port to the computer and load 
> the HRD program
>
> I get a screen indicating that the program can not find the radio.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to je...@carolinaheli.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] having problems connecting my K-3 to Ham Radio Deluxe

[Irwin Darack]

I also run HRD with my K3S and K3 using Win 10 with no problems.
Irwin KD3TB

On Friday, November 6, 2015,  wrote:

> What issues are you experiencing? I'm running the latest HRD with Win 10
> and
> not having any issues. Are you running any type of port multiplexing
> software? I don't recall the name, however, one popular one definitely
> isn't
> stable on win10.
>
> Jerry Moore
> CDXA, INDEXA, SKCC, Fists
> AE4PB, K3S - S.N. 010324
> http://www.qrz.com/db/AE4PB
> An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
> Patriotic.
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net ]
> On Behalf Of Bob
> McGraw - K4TAX
> Sent: Friday, November 06, 2015 9:31 AM
> To: elecraft@mailman.qth.net 
> Subject: Re: [Elecraft] having problems connecting my K-3 to Ham Radio
> Deluxe
>
> I tried HRD 6.0 and dumped it.  I find there are issues with Windows 10 and
> HRD 6.0 that have not been resolved.
>
> I do run Windows 10 and other applications,  i.e.  HRD 5.0/DM-780, FLDIGI,
> WSJT-X and others very successfully with the K3S and the USB to radio
> connection.  So, if it runs with HRD 5.0 and not HRD 6.0, using the same
> computer, same operating system, same cable, same radio, I strongly suspect
> the issue is within HRD 6.0.
>
> 73
> Bob, K4TAX
> K3S s/n 10163
>
>
> On 11/6/2015 7:44 AM, John Weber wrote:
> > When I connect the radio thru the KUSB port to the computer and load
> > the HRD program
> >
> > I get a screen indicating that the program can not find the radio.
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net 
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message
> delivered to je...@carolinaheli.com 
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net 
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to idar...@gmail.com 
>


-- 
Irwin KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] having problems connecting my K-3 to Ham Radio Deluxe

[Rick Bates (WA6NHC)]

The driver for the KUSB must match the port that HRD is looking for (each set 
to COMx).  Start there. 

I use HRD without issues on the K line. 

Rick wa6nhc

Tiny iPhone 5 keypad, typos are inevitable

> On Nov 6, 2015, at 5:44 AM, John Weber  wrote:
> 
> Here  is a general overview of my problem
> 
> 
> K-3 radio, new Lenovo desk top with windows 10 operating system
> 
> 
> HRD version 6.3 (latest Software )
> 
> 
> Elecraft KUSB black cable 
> 
> 
> Please note that I operated the radio with HRD in the past using an old 
> computer using windows 7 but that computer has gone to the grave yard.
> 
> 
> I have contacted HRD , Lenovo & Elecraft to trouble shoot the problem 
> 
> 
> When I connect the radio thru the KUSB port to the computer and load the HRD 
> program 
> 
> I get a screen indicating that the program can not find the radio.
> 
> Elecraft indicates that the drivers in the computer operating system are not 
> the drivers needed to operate the radio, so I down loaded the driver that 
> Elecraft indicated and still can not connect.
> 
> I Used an old computer with a Windows Vista operating system and connected it 
> to the radio with HRD 6.3 and it operated correctly!!
> 
> 
> 
> 
> 
> Has any one had this problem ??
> 
> And what is the solution !
> 
> Please advise 
> 
> 
> John WA2C
> 
> 
> 
> 
> 
> 
> Sent from Windows Mail
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wa6...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Looking for Grandkid radio

[David Heinsohn]

Neil

  My suggestion would be to shy away from the easy to build, but hard 
to operate, or lower quality receivers. At this point I suspect the 
grandson is not all that interested in how hard or easy a receiver is to 
design or build. Rather I suspect he's interested in listening to stuff. 
Don's suggestion about finding an SDR makes lots of sense. Add a key and 
oscillator so he can make noise but not transmit and away he goes. The 
goal of a quality receiver, that is simple to operate makes sense.


Good Luck,
David

On 11/5/2015 11:14 PM, Don Wilhelm wrote:

Neil,

I have seen several responses recommending a regenerative receiver. I 
would suggest otherwise.  While regenerative receivers are "fun" to 
play with and can be quite sensitive and selective when properly 
tuned, they do require some 'training' to know how to properly operate 
both the tuning and the regen knobs together.   If you want to pursue 
the Regen route, look at some of the regen designs by George Dobbs 
G3RGV - he has several that work well.


Since your grandson likely has access to a computer, I would suggest 
that you look at some of the SDR receivers, such as the SoftRock kits 
- inexpensive and quite functional for all modes. Building the kit 
(with help from grandpa) may peak his interest in building his own 
gear and add to his interest in the hobby. some software running on 
the computer is necessary, but there are several software applications 
that will do - Rocky is one of the easiest to install and configure, 
HDSDR is good but requires a bit more configuration "smarts".  There 
is also PowerSDR that can be used and there may be more that I am not 
familiar with.


If kit building is not in store, then look for a used 
receiver/transceiver that may be up to the task.  If you can find 
someone who has an SWL40 transceiver for sale (ask on the QRP-L 
reflector), that is a good starting point for 40 meters that will give 
good results - there are versions for other bands as well, but I 
suggest that 40 meters is the best starting band for single band 
rigs.  There is usually some activity on 40 when other bands are 
'dead' - and an antenna for 40 meters is of a reasonable size.


I started introducing  my 2 grandsons to electronics when they about 8 
years old.  It only "took" for one of them who got his license at age 
13.  The 6 granddaughters were not interested at all.  So do keep 
working with him - if it "takes", ham radio in its diverse interests 
and niche activity groups can produce a lifelong hobby, and may be an 
introduction to a rewarding career in electronics and/or 
communications technology.


I am one of those examples - I became aware of ham radio in Boy Scouts 
at the age of 14 when the local ham radio club offered classes in 
morse code.  That led to my novice license at age 15, and those ham 
club members, coupled with my interest in math, led me to pursue an 
electrical engineering degree.  That led to a very rewarding career 
and now even though I am officially retired and at age 75 1/2, my 
workbench is always full (and usually backlogged) with repairs of 
Elecraft gear. So there is hope for your grandson to engage in a 
lifelong pursuit that he may really enjoy.  If he enjoys puzzles, he 
may enjoy puzzling over electronics problems which is the heart and 
soul of troubleshooting (and design).


73,
Don W3FPR

73,
Don W3FPR

On 11/5/2015 6:46 PM, Niel Skousen wrote:
Found out last night that one of grandsons (6 1/2 yr) has developed 
an interest in Morse code and radios. Who know how long it will last 8-)


BUT in the interest of feed the fire, I'm looking for something that 
I can help him listen on at his house ...


Anybody got anything collecting dust that needs a new home ??




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@fhrd.net



--
David Heinsohn
Chief Engineer
Flint Hills RR
Happily Playing with Trains Representing
ATSF
Eastern Lines
Western District
Middle Division
1st district
Emporia to Newton
in the 1930s.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 QSK CW Audio Dropouts

[ok1rp]

Hi all,

few days ago I realized on K3 (using latest MCU/FPF) weird receive audio
dropout problem.
It happends during QSK CW operation and it is hearable in audio in between
TX periods > time to time but it is repeatable. I did not heard these
dropouts during receiving only mode...
Simply when I am listenning on K3 all is ok but when I am starting to call
CW or I am making QSO then dropouts in audio are readable in between TX
periods with QSK.

Is there someone with similar effect please?
Is there chance that it is linked to K3S weird transmit audio dropout
problem discussed in different threat?

Thank for ideas.

73 - Petr, OK1RP



-
http://ok1rp.blogspot.com
--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-QSK-CW-Audio-Dropouts-tp7610047.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] PX3 lines - no radio attached

[David Anderson]

It is normal, they should be hidden by band noise when the radio is connected.

73

David Anderson GM4JJJ 

> On 6 Nov 2015, at 01:26, David Davis  wrote:
> 
> This might be an obvious question for some of you so I am hoping I can get a 
> quick answer. However, I am very new to this type of equipment and have no 
> idea if this is normal or not.
> 
> I have a brand new PX3 panadapter, even when there is no radio attached to 
> the unit there are four small signal spikes and nearly solid lines on the 
> waterfall below. There is one line below each spike. I also see these even 
> when a radio is attached and was just wondering if these are normal or if 
> there is a way to make them go away.
> 
> Thank you in advance for any answers.
> 
> David
> KG6MTI
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gm4...@yahoo.co.uk
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Looking for Grandkid radio

[Al Gulseth]

I guess my reply suggesting a regen/kit was influenced by my own experience. I 
was around Niel's grandson's age when my dad took me to his workbench in the 
attic. I came away with a homebrew crystal set which I built under his 
tutelage. It would only pick up the two local BC stations, but it worked. (I 
did eventually get to have his old Hallicrafters RX in my room for a while.)

My homebrewing and kitbuilding continued later on from there with items like a 
Heathkit portable AM receiver (which I still have) and on to more recent kit 
offerings including Elecraft.

My experience with today's web/smartphone focused kids is that any mention of 
communicating by radio with someone on the other side of the world is met 
with glazed eyes. Suggest doing that with a radio that they built and watch 
the lightbulb come on

73, Al

On Fri November 6 2015 10:31:19 am David Heinsohn wrote:
> Neil
>
>My suggestion would be to shy away from the easy to build, but hard
> to operate, or lower quality receivers. At this point I suspect the
> grandson is not all that interested in how hard or easy a receiver is to
> design or build. Rather I suspect he's interested in listening to stuff.
> Don's suggestion about finding an SDR makes lots of sense. Add a key and
> oscillator so he can make noise but not transmit and away he goes. The
> goal of a quality receiver, that is simple to operate makes sense.
>
> Good Luck,
> David
>
> On 11/5/2015 11:14 PM, Don Wilhelm wrote:
> > Neil,
> >
> > I have seen several responses recommending a regenerative receiver. I
> > would suggest otherwise.  While regenerative receivers are "fun" to
> > play with and can be quite sensitive and selective when properly
> > tuned, they do require some 'training' to know how to properly operate
> > both the tuning and the regen knobs together.   If you want to pursue
> > the Regen route, look at some of the regen designs by George Dobbs
> > G3RGV - he has several that work well.
> >
> > Since your grandson likely has access to a computer, I would suggest
> > that you look at some of the SDR receivers, such as the SoftRock kits
> > - inexpensive and quite functional for all modes. Building the kit
> > (with help from grandpa) may peak his interest in building his own
> > gear and add to his interest in the hobby. some software running on
> > the computer is necessary, but there are several software applications
> > that will do - Rocky is one of the easiest to install and configure,
> > HDSDR is good but requires a bit more configuration "smarts".  There
> > is also PowerSDR that can be used and there may be more that I am not
> > familiar with.
> >
> > If kit building is not in store, then look for a used
> > receiver/transceiver that may be up to the task.  If you can find
> > someone who has an SWL40 transceiver for sale (ask on the QRP-L
> > reflector), that is a good starting point for 40 meters that will give
> > good results - there are versions for other bands as well, but I
> > suggest that 40 meters is the best starting band for single band
> > rigs.  There is usually some activity on 40 when other bands are
> > 'dead' - and an antenna for 40 meters is of a reasonable size.
> >
> > I started introducing  my 2 grandsons to electronics when they about 8
> > years old.  It only "took" for one of them who got his license at age
> > 13.  The 6 granddaughters were not interested at all.  So do keep
> > working with him - if it "takes", ham radio in its diverse interests
> > and niche activity groups can produce a lifelong hobby, and may be an
> > introduction to a rewarding career in electronics and/or
> > communications technology.
> >
> > I am one of those examples - I became aware of ham radio in Boy Scouts
> > at the age of 14 when the local ham radio club offered classes in
> > morse code.  That led to my novice license at age 15, and those ham
> > club members, coupled with my interest in math, led me to pursue an
> > electrical engineering degree.  That led to a very rewarding career
> > and now even though I am officially retired and at age 75 1/2, my
> > workbench is always full (and usually backlogged) with repairs of
> > Elecraft gear. So there is hope for your grandson to engage in a
> > lifelong pursuit that he may really enjoy.  If he enjoys puzzles, he
> > may enjoy puzzling over electronics problems which is the heart and
> > soul of troubleshooting (and design).
> >
> > 73,
> > Don W3FPR
> >
> > 73,
> > Don W3FPR
> >
> > On 11/5/2015 6:46 PM, Niel Skousen wrote:
> >> Found out last night that one of grandsons (6 1/2 yr) has developed
> >> an interest in Morse code and radios. Who know how long it will last 8-)
> >>
> >> BUT in the interest of feed the fire, I'm looking for something that
> >> I can help him listen on at his house ...
> >>
> >> Anybody got anything collecting dust that needs a new home ??
> >
> > __
> > Elecraft mailing list
> > Home: 

Re: [Elecraft] K3S Transmit Audio Dropouts

[Bob McGraw - K4TAX]

Has anyone else had or found this issue?   I found that it does exist 
with mine.  Is there any solution?


73 Bob, K4TAX
K3S s/n 10163

 


On 10/30/2015 4:49 PM, Jim - N4ST wrote:

It has a weird transmit dropout problem.

On 6, 10 & 12 meters, there is a momentary loss of transmit audio every 15
seconds.

Occurs with DATA A and SSB modes.

Problem occurs with internal or external sound card and even with the
built-in 2 tone test.

The audio dropout is repeatable and precisely formed as two 10 ms dropouts
separated by 15 ms and the pattern repeats every 15 seconds.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPA500 no power out

[N2TK, Tony]

Does anyone know if there is a serial number cutoff where this mod is in
place?
I am assuming the LPF board wil be marked to tell which rev lewvel it is?
Tnx
N2TK, Tony

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Arie
Kleingeld PA3A
Sent: Friday, November 06, 2015 2:38 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA500 no power out

Frank,

This looks like the problem I had with my KPA500 that turned out to be a
fault in the T/R switch. My troubles also started on 7MHz.
There's a modkit for that: E850607. I installed it myself.

This has been in the reflector before. Look e.g. for the thread on
KPA500 troubles of last October.

73
Arie


Op 5-11-2015 om 22:48 schreef n...@comcast.net:
> Can someone advise me on the following?
>
> My KPA500 (S/N 2663) Amplifier stopped working in the middle of a CW 
> QSO on 7MHz.
> It has been working flawlessly for the past two months (since new).
>
> At the time:
> Driver is a K3 running 20w and KPA500 running 400 watts.
> Antenna tuner is a KAT500.
> Antenna is a GAP Challenger.
> Frequency was 7.07 MHz.
> While transmitting, the SWR on the KPA500 went high and a Fault flashed.
> The KPA500 seemed to reset its self and I continued sending.
> The sequence repeated a few seconds later except that the KPA500 had 
> no output power.
> Further testing resulted in the following findings:
>
> Reloaded the firmware.
>
> K3, KPA500 and KAT500 was connected in accordance with Figure 1, Page 
> 5, of the Owners manual.
> For the following tests, the output of the KPA500 was connected 
> directly to the SWR meter and the SWR meter was connected directly to 
> the dummy load eliminating the KAT500.
>
> Frequency: 3.57 MHz, All works well.
>
> Frequency: 7.07MHz, K3: (ON) 100w, KPA500: (Standby), SWR on KPA500: 
> 1, SWR on SWR meter between KAT500 and dummy load: 1.1:1
>K3 power reduced to 10w, Switch the KPA500 to Operate, KPA500 no 
> lights indicating SWR or Power.  K3: SWR and RF indicators jumping up 
> and down. Raspy tone heard in station monitor (TS-850).  The LCD
> shows: "7.0 MHZ" no matter which switch around the display I push or 
> how many times I push them or how long I hold the switch.
>
> Frequency 14.07 MHz, All works well.
>
> The KPA500 (kit) is under warranty, anyone know what s going on here?  
> Did I do something wrong?  Is it time to send it back to Elecraft?
>
> Frank
> N7FN
>
>
>
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> p...@xs4all.nl
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to tony@verizon.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3S Transmit Audio Dropouts

[Don Wilhelm]

Yes, Wayne answered a few days ago.  It is caused by the way he samples 
the PA Temperature.

It will be modified in an upcoming firmware release.

73,
Don W3FPR

On 11/6/2015 8:14 AM, Bob McGraw - K4TAX wrote:
Has anyone else had or found this issue?   I found that it does exist 
with mine.  Is there any solution?


73 Bob, K4TAX
K3S s/n 10163




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 QSK CW Audio Dropouts

[Don Wilhelm]

Petr,

Yes, Wayne' explanation was that the PA Temp is sampled between 
characters in CW, so if one uses QSK and listens closely, you can hear 
the gaps in the audio when the K3 returns to receive.


You may find a change in a firmware upgrade coming soon, but I don't 
know when.


73,
Don W3FPR

On 11/6/2015 12:05 PM, ok1rp wrote:

Hi all,

few days ago I realized on K3 (using latest MCU/FPF) weird receive audio
dropout problem.
It happends during QSK CW operation and it is hearable in audio in between
TX periods > time to time but it is repeatable. I did not heard these
dropouts during receiving only mode...
Simply when I am listenning on K3 all is ok but when I am starting to call
CW or I am making QSO then dropouts in audio are readable in between TX
periods with QSK.

Is there someone with similar effect please?
Is there chance that it is linked to K3S weird transmit audio dropout
problem discussed in different threat?




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 QSK CW Audio Dropouts

[Jim - N4ST]

If it is the PA Temp issue, the dropouts should only occur on 12, 10 & 6
meters.
The other bands will be clean.  
Drove me nuts when I got my new K3S last week.

__ 
73,
Jim - N4ST

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of ok1rp
Sent: Friday, November 6, 2015 12:05
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 QSK CW Audio Dropouts

Hi all,

few days ago I realized on K3 (using latest MCU/FPF) weird receive audio
dropout problem.
It happends during QSK CW operation and it is hearable in audio in between
TX periods > time to time but it is repeatable. I did not heard these
dropouts during receiving only mode...
Simply when I am listenning on K3 all is ok but when I am starting to call
CW or I am making QSO then dropouts in audio are readable in between TX
periods with QSK.

Is there someone with similar effect please?
Is there chance that it is linked to K3S weird transmit audio dropout
problem discussed in different threat?

Thank for ideas.

73 - Petr, OK1RP



-
http://ok1rp.blogspot.com
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-QSK-CW-Audio-Dropouts-tp7610047.html
Sent from the Elecraft mailing list archive at Nabble.com.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Grandkid Radio / Yaesu VR-5000

[Dauer, Edward]

Under the heading of not in use and collecting dust, I have a Yaesu
VR-5000 that I haven¹t used since the month after I bought it, some years
ago.  I¹d be happy to sell it for whatever a fair price is (which would be
fully refundable if the radio doesn¹t work - given that I haven¹t powered
it up in years.)  It might be a bit much for an 8-year old, though - as I
remember, the configuration and operating procedures were too cumbersome
for it to be useful for the purpose I originally bought it.  If you, Neil,
or anyone else is interested, please contact me off-list,


Ted, KN1CBR



>-Original Message-
>From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Niel
>Skousen
>Sent: Thursday, November 5, 2015 3:46 PM
>To: qr...@mailman.qth.net; Elecraft Reflector
>Subject: [Elecraft] Looking for Grandkid radio
>
>Found out last night that one of grandsons (6 1/2 yr) has developed an
>interest in Morse code and radios.  Who know how long it will last 8-)
>
>BUT in the interest of feed the fire, I'm looking for something that I can
>help him listen on at his house ...
>
>Anybody got anything collecting dust that needs a new home ??
>
>Niel
>
>
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 QSK CW Audio Dropouts

[Steve Ellington]

K3SQSK on any band, CW...I hear an occasional clunk or pop but only
when using the bug. Seems like it builds up then suddenly discharges or
something or maybe a weird timing issue. Nothing too serious. I don't
notice it with the internal keyer, just the bug and on the lower bands 80,
40 etc.
N4LQ

On Fri, Nov 6, 2015 at 1:15 PM, Jim - N4ST  wrote:

> If it is the PA Temp issue, the dropouts should only occur on 12, 10 & 6
> meters.
> The other bands will be clean.
> Drove me nuts when I got my new K3S last week.
>
> __
> 73,
> Jim - N4ST
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> ok1rp
> Sent: Friday, November 6, 2015 12:05
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] K3 QSK CW Audio Dropouts
>
> Hi all,
>
> few days ago I realized on K3 (using latest MCU/FPF) weird receive audio
> dropout problem.
> It happends during QSK CW operation and it is hearable in audio in between
> TX periods > time to time but it is repeatable. I did not heard these
> dropouts during receiving only mode...
> Simply when I am listenning on K3 all is ok but when I am starting to call
> CW or I am making QSO then dropouts in audio are readable in between TX
> periods with QSK.
>
> Is there someone with similar effect please?
> Is there chance that it is linked to K3S weird transmit audio dropout
> problem discussed in different threat?
>
> Thank for ideas.
>
> 73 - Petr, OK1RP
>
>
>
> -
> http://ok1rp.blogspot.com
> --
> View this message in context:
>
> http://elecraft.365791.n2.nabble.com/K3-QSK-CW-Audio-Dropouts-tp7610047.html
> Sent from the Elecraft mailing list archive at Nabble.com.
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to steven...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 QSK CW Audio Dropouts

[Don Wilhelm]

That particular audio dropout that I described will only happen on 12, 
10 and 6 meters.

If something similar is heard on other bands, look for some other cause.

73,
Don W3FPR

On 11/6/2015 3:06 PM, Steve Ellington wrote:

K3SQSK on any band, CW...I hear an occasional clunk or pop but only
when using the bug. Seems like it builds up then suddenly discharges or
something or maybe a weird timing issue. Nothing too serious. I don't
notice it with the internal keyer, just the bug and on the lower bands 80,
40 etc.
N4LQ




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 Yamaha CM500 vs Koss SB40

[Ken]

I have been very happy with the Koss SB-45 and get great audio reports 
with it.  I have found the ear

phones comfortable.

Ken WA8JXM

On 11/5/15 9:41 PM, Dave Hachadorian wrote:
The SB45 headset has an electret element, but it is not the same 
comfortable headphone arrangement as the CM-500.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Speaker SP3 Video

[Steve Ellington]

I just did a little video on the SP3.

https://www.youtube.com/watch?v=I2EmW46zgDw

Steve N4LQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 QSK CW Audio Dropouts

[Bob McGraw - K4TAX]

Steve, I believe anything else you are hearing is something else. This 
issue is strictly on 12M, 10M and 6M.  Even noticed on 10M and 6M AM 
with the artifact being a momentary carrier collapse.  It's fast, about 
10 milliseconds and does occur every 15 seconds.


I tried a bug with my K3S and did not find to have reliable keying. I 
cleaned the bug contacts but to no avail.  Went back to the Iambic 
paddles and the internal keyer with 100% satisfaction.


73
Bob, K4TAX

On 11/6/2015 2:06 PM, Steve Ellington wrote:

K3SQSK on any band, CW...I hear an occasional clunk or pop but only
when using the bug. Seems like it builds up then suddenly discharges or
something or maybe a weird timing issue. Nothing too serious. I don't
notice it with the internal keyer, just the bug and on the lower bands 80,
40 etc.
N4LQ



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 QSK CW Audio Dropouts

[Steve Ellington]

Depends on the bug. With my McElroy stream I had to add a 1uf capacitor in
parallel with it. After reducing the dit gap to compensate to the keying,
it sounds great.
On my Vibroplex Presentation, no capacitor is needed and keying is perfect.
I noticed the same thing on my old K3 and a few other rigs. I suspect it's
something to do with contact bounce due to variations in the dit spring and
how different rigs react to the bounce.
I have to remember we are no longer just keying a circuit rather we are
keying a computer from another planet. :*)
Steve N4LQ

On Fri, Nov 6, 2015 at 4:04 PM, Bob McGraw - K4TAX 
wrote:

> Steve, I believe anything else you are hearing is something else. This
> issue is strictly on 12M, 10M and 6M.  Even noticed on 10M and 6M AM with
> the artifact being a momentary carrier collapse.  It's fast, about 10
> milliseconds and does occur every 15 seconds.
>
> I tried a bug with my K3S and did not find to have reliable keying. I
> cleaned the bug contacts but to no avail.  Went back to the Iambic paddles
> and the internal keyer with 100% satisfaction.
>
> 73
> Bob, K4TAX
>
> On 11/6/2015 2:06 PM, Steve Ellington wrote:
>
>> K3SQSK on any band, CW...I hear an occasional clunk or pop but only
>> when using the bug. Seems like it builds up then suddenly discharges or
>> something or maybe a weird timing issue. Nothing too serious. I don't
>> notice it with the internal keyer, just the bug and on the lower bands 80,
>> 40 etc.
>> N4LQ
>>
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to steven...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker SP3 Video

[Chester Alderman]

No audio on your video?

Tom - W4BQF



-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Steve
Ellington
Sent: Friday, November 6, 2015 4:26 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Speaker SP3 Video

I just did a little video on the SP3.

https://www.youtube.com/watch?v=I2EmW46zgDw

Steve N4LQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to alderm...@windstream.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 QSK CW Audio Dropouts

[ok1rp]

Hi,

It happends even when K3 is keying from it´s memory. So paddle or ext. bug
is not an issue. 

73 - Petr, OK1RP



-
http://ok1rp.blogspot.com
--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-QSK-CW-receive-audio-dropouts-tp7610047p7610060.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker SP3 Video

[Anthony Scandurra]

Worked fine here...using Chrome 46.

Nice demo, Steve!

73, Tony K4QE

On Fri, Nov 6, 2015 at 4:43 PM, Chester Alderman 
wrote:

> No audio on your video?
>
> Tom - W4BQF
>
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> Steve
> Ellington
> Sent: Friday, November 6, 2015 4:26 PM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] Speaker SP3 Video
>
> I just did a little video on the SP3.
>
> https://www.youtube.com/watch?v=I2EmW46zgDw
>
> Steve N4LQ
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message
> delivered to alderm...@windstream.net
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to anthony.scandu...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker SP3 Video

[Cliff Frescura]

Sounds fine here.


Cliff K3LL

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Chester Alderman
Sent: Friday, November 06, 2015 1:43 PM
To: 'Steve Ellington'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Speaker SP3 Video

No audio on your video?

Tom - W4BQF



-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Steve
Ellington
Sent: Friday, November 6, 2015 4:26 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Speaker SP3 Video

I just did a little video on the SP3.

https://www.youtube.com/watch?v=I2EmW46zgDw

Steve N4LQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to alderm...@windstream.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to c...@cfcorp.com




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker SP3 Video

[Ian]

Unplug the USB cable from your K3  :)
73, Ian N8IK 


-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Anthony Scandurra
Sent: Friday, November 6, 2015 16:51
To: Chester Alderman 
Cc: Elecraft Reflector 
Subject: Re: [Elecraft] Speaker SP3 Video

Worked fine here...using Chrome 46.

Nice demo, Steve!

73, Tony K4QE

On Fri, Nov 6, 2015 at 4:43 PM, Chester Alderman 
wrote:

> No audio on your video?
>
> Tom - W4BQF
>
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of 
> Steve Ellington
> Sent: Friday, November 6, 2015 4:26 PM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] Speaker SP3 Video
>
> I just did a little video on the SP3.
>
> https://www.youtube.com/watch?v=I2EmW46zgDw
>
> Steve N4LQ
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> alderm...@windstream.net
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> anthony.scandu...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ik7...@verizon.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KDSP2

[Hans Bonnesen]

KDSP2

 

The building of my K2 (# 7359 ) was concluded on December 14. 2012, after 
months of sheer joy.

Once again doing something worth-while with a soldering iron in your hands.!!

The result: Amazing,…  and yet I fell for the KDSP2 noise reduction on SSB 
signals as demonstrated on the home page of Elecraft.

Having concluded and installed the KDSP2  I learned that it takes some time to 
get into the deeper intricasies of this add-on module.

A friendly US amateur told me over a couple of mails: ”You will love it when 
you learn to master it. But when you do, it does work wonders.”

He was right, but it does take willpower to remember what you were doing last 
time you changed something.

The reason for the operational difficulties is, that the set-up of bandwith, 
filters and other specifics can only be reached in the second or third level 

of pushbutton strikes. 

After a thorough study of the manual it clear to you, but after a month…. Alas 
!!

 

OZ5RB, Hans
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com