[Elecraft] FS West Mountain Radio CLRspkr
For Sale: West Mountain Radio CLRspkr - brand new in the box, never opened. Selling it because a friend gave me his CLRspkr after I ordered this one. Asking $200 which includes shipping. I can ship it tomorrow if you pay using PayPal. Steve K6SAB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Just getting a K3 and wonder what desk microphone is recommended (reasonably priced though). Ron KK6ZRA
Kenwood MC-50 is easy obtain new or used. It's a convenient dynamic mic with adequate audio. Any Heil mic is a good choice. Doug -- K0DXV On 4/20/2016 2:39 PM, Ron Reis wrote: __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k0...@aol.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 CW/data text decode?
I just upgraded from a KX3/PX3 to a K3s/P3. On my PX3, I could hold a key (LABELS?) to get a two-line display of characters the KX3 decoded in CW and data modes. I can't find this feature on my P3. Is it there? The only place the owner's manual mentions text decode is in the SVGA section. I do not have the SVGA option. How do I make the P3 display decoded text? Thanks. -- 73, Mike N4CF Louisa County, VA USA Elecraft K3s/100 Carolina Windom up 45' http://n4cf.mdodd.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 AGC Slope
I am looking for a .WAV or similar recording of KX3 CW audio using the range ends of the setup AGC*SLP, the settings go from 000 to 015. Assuming AGC Fast. Does this control have much of an effect on the sharp end? TIA,Don wb8yqjCarlsbad, Ca. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] AFSK-A with K3s
So? On 4/20/2016 10:22 AM, Nr4c wrote: This is not AGSK A mode. It is FSK D. Sent from my iPhone ...nr4c. bill __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Just getting a K3 and wonder what desk microphone is recommended (reasonably priced though). Ron KK6ZRA
Or, make up a short adapter cable from the K3 to the microphone plug. That way, neither the microphone nor the K3 is modified. Ed W0YK -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: 20 April, 2016 15:02 To: Ron Reis; Elecraft@mailman.qth.net Subject: Re: [Elecraft] Just getting a K3 and wonder what desk microphone is recommended (reasonably priced though). Ron KK6ZRA Kenwood's dynamic microphones are compatible with the Elecraft pinout. Be cautious of those with an amplifier which need a voltage on pin 5 - Elecraft puts the DC voltage on pin 6, so those will not work unless the mic plug wiring is altered. You can use just about any dynamic or electret element microphone if you are willing to re-wire the mic plug to match the Elecraft pinout. 73, Don W3FPR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Just getting a K3 and wonder what desk microphone is recommended (reasonably priced though). Ron KK6ZRA
Kenwood's dynamic microphones are compatible with the Elecraft pinout. Be cautious of those with an amplifier which need a voltage on pin 5 - Elecraft puts the DC voltage on pin 6, so those will not work unless the mic plug wiring is altered. You can use just about any dynamic or electret element microphone if you are willing to re-wire the mic plug to match the Elecraft pinout. 73, Don W3FPR On 4/20/2016 5:39 PM, Ron Reis wrote: __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Just getting a K3 and wonder what desk microphone is recommended (reasonably priced though). Ron KK6ZRA
Ron - I don't use a desk mic, I prefer a headset, but pretty much any mic will sound great because the K3 offers a lot of versatility in the TX equalizer and other settings. I've seen posts about guys using $4.99 computer mics. Spend your bux on antennas. 73, Mike NF4L > On Apr 20, 2016, at 5:39 PM, Ron Reis wrote: > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Just getting a K3 and wonder what desk microphone is recommended (reasonably priced though). Ron KK6ZRA
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod Question
Its assembled only. There is just one pcb inside. 73, Eric /elecraft.com/ On 4/20/2016 10:31 AM, Jim Finan wrote: I guess my question didn't make it. Question is: Is the K-Pod a kit? Can't seem to find any reference to that on the product sheet or website. If it's been asked here before, I guess I missed it. I assumed it is, but... Jim Finan AB4AC Sent from my BlackBerry 10 smartphone. Original Message From: Jim Finan Sent: Wednesday, April 20, 2016 11:59 AM To: Elecraft@mailman.qth.net Subject: [Elecraft] K-Pod Question __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to jimfi...@att.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to eric.swa...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod Question
Oops, I neglected your other question. So far, Wayne/Eric have decided it will not be released in kit form. 73, Ron AC7AC -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Finan Sent: Wednesday, April 20, 2016 10:31 AM To: Elecraft@mailman.qth.net Subject: Re: [Elecraft] K-Pod Question I guess my question didn't make it. Question is: Is the K-Pod a kit? Can't seem to find any reference to that on the product sheet or website. If it's been asked here before, I guess I missed it. I assumed it is, but... Jim Finan AB4AC Sent from my BlackBerry 10 smartphone. Original Message From: Jim Finan Sent: Wednesday, April 20, 2016 11:59 AM To: Elecraft@mailman.qth.net Subject: [Elecraft] K-Pod Question __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to jimfi...@att.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] W2 Desktop Software
All I think I asked this before, but I can't remember if someone replied. I love my W2 software for my remote base, but I am looking for a client that takes up much less screen space, at least for the basic meter movement. More importantly, I tend to use it in client/server mode, so the part I would like is the Client side that is IP connected to the host side. Has anyone written something different? Mike va3mw __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod Question
Hi Jim: This is the announcement made by Wayne with a link to an image of the K-Pod Hi all, We've had many requests for a small control panel (or pod) as an extension to the K3 and K3S transceivers. We finally got around to it! Our new K-Pod is a very compact unit, featuring a precision tuning knob, VFO A/B/offset rocker switch, and 8 programmable tactile-feedback switches. Switch feedback is provided by activation messages on the radio's LCD, as well as the pod's own 4 indicator LEDs and audio tone generator. This multi-modal information can help maximize operating efficiency and reduce fatigue during extended operating periods. Typically the K-Pod would be placed next to a computer keyboard, allowing the operator to quickly QSY, clear RIT, enter diversity mode, change menu settings, etc., without that long stretch to reach the radio's front panel. But the K-Pod's flexible interface goes beyond substitution of the radio's knobs and switches. In effect, you can design your own customized controls for the radio. Each of the 8 programmable switches has tap and hold functions. When a switch function is used, it activates one of up to 16 user-defined command sequences that are actually stored in the radio itself, as macros. A single macro can accomplish many tasks at once, such as setting up custom splits, configuring the receiver or subreceiver for specific situations, sending transmit messages at differing code speeds, etc. Macros can be easily created or edited using K3 Utility, which runs on PC, Mac, or Linux platforms. The K-Pod has the following features: * high-quality weighted, soft-touch tuning knob--same as used on the K3S * same 400-count, ball-bearing optical encoder used in the K3 and K3S * adjustable knob friction * 3-position rocker switch to assign the knob to VFO A, VFO B, or RIT/XIT * 8 programmable function switches, each with tap/hold functions * simple switch programming using K3 Utility (many examples in K-Pod manual) * four user-definable LEDs (three of them show knob assignment by default) * audio tone generator for switch feedback (can be easily turned off) * USB port for firmware loading and future equipment/computer control applications * simple connection to K3 or K3S--uses the 6-pin RJ-style jack beneath the front panel * flexible power source: rear 12-V jack on the radio, DC barrel jack, USB port, or even through the 6-pin data cable, with minor radio modification (the latter method results in a single cable to the K-Pod for data and power) * 3 utility outputs for miscellaneous equipment control applications (outputs provide a low resistance to ground when turned on, usable with relays, etc.) The K-Pod's all-steel enclosure weighs a full pound for excellent stability, yet measures only about 3.5 x 3 x 1 inches. A highly stable folding tilt stand is included to angle the panel for optimal access. There's also a 2-hole RAM mount pattern on the bottom for easy attachment to any surface. For photos and further information, please visit our K-Pod web page: http://www.elecraft.com/k-pod/k-pod.htm 73, Wayne, N6KR Eric, WA6HHQ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Finan Sent: Wednesday, April 20, 2016 10:31 AM To: Elecraft@mailman.qth.net Subject: Re: [Elecraft] K-Pod Question I guess my question didn't make it. Question is: Is the K-Pod a kit? Can't seem to find any reference to that on the product sheet or website. If it's been asked here before, I guess I missed it. I assumed it is, but... Jim Finan AB4AC Sent from my BlackBerry 10 smartphone. Original Message From: Jim Finan Sent: Wednesday, April 20, 2016 11:59 AM To: Elecraft@mailman.qth.net Subject: [Elecraft] K-Pod Question __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to jimfi...@att.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] AFSK-A with K3s
Yes, my problem was not when sending RTTY with a paddle, it was when using MMTTY and I was trying to send FSK. All I could hear was one tone, not the two tones of mark space. I thought it was nice not to hear the two tones when listening. I did not realize I could not properly key the K3s without an additional hardware. Now I have the K3s set to use AFSK A so that I don't need to have additional hardware/connections and no longer use the paddles to send, only MMTTY. When I use MMTTY I have to have the PTT-KEY set to OFF-OFF. When I switch to N1MM I have to have it set to DTR-RTS. I have problems of locked down transmission if I don't and switch to CW from the RTTY setting. As a result, I can't have both MMTTY and N1MM running at the same time. I'm guessing this may have to do with a RTS setting in the software but haven't had time to work it out. 73, Gary KA1J > This is not AGSK A mode. It is FSK D. > > Sent from my iPhone > ...nr4c. bill > > > > On Apr 17, 2016, at 9:38 AM, Triconet_2 wrote: > > > > You and at least two dozen guys I logged doing something similar And I > > would venture to guess that most of them were running K3s. > > > > I emailed one of these guys and got back the confession that 1) yes he was > > using a K3 and 2) he was sending radioteletype with the paddle. > > > > The inadvertent writing of A to B while attempting to engage Split accounts > > for the QRM on the DX freq, the 15 WPM RTTY with the long unmodulated tail > > results from the other. (This assumes that the operator actually knows that > > he is supposed to be operating split... too many don't) > > > >> On Apr 14, 2016, at 5:35 AM, "Gary Smith" wrote: > >> > >> In fact, what I was > >> transmitting was just a key down and not > >> the RTTY I thought I was putting out and I > >> was inadvertently QRMing every time I > >> transmitted. > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to n...@widomaker.com > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to g...@ka1j.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 For Sale With Options
Elecraft K3/100; Late #7504, which includes all factory upgrades. K3SYN3AUPG newest Synthesizer option installed. This significantly improves receiver performance, and is the most significant upgrade option to the K3. KXV3A Receive ANT IF out and XVRTR Interface board, installed. KIO3 I/O board option, installed. Standard KTCXO3 Reference Oscillator, 0.5PPM. KBPF3 General Coverage Receive option, installed. Standard 5 pole 2.7 kHz crystal filter. KAT3 Internal automatic antenna tuner option, installed. In "Like New" condition. No scratches or blemishes. Even all the front panel knobs are new. One owner nonsmoker; and 18 months old. When I build these, I treat every connector pin with Caig De-Oxit Pro gold solution, to prevent pin Oxidation; intermittent connections; easy connector insertion; with very low contact resistance. Includes PowerPole Power cable; Allen wrenches; PA Jumper; and manuals. Pictures available. $2495.00 plus $20 shipping CONUS. PayPal; Bank check; or personal Check. Contact me off line at: WB4OOA at gmail.com Ron Durie Elecraft K3s-Line __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod Question
I guess my question didn't make it. Question is: Is the K-Pod a kit? Can't seem to find any reference to that on the product sheet or website. If it's been asked here before, I guess I missed it. I assumed it is, but... Jim Finan AB4AC Sent from my BlackBerry 10 smartphone. Original Message From: Jim Finan Sent: Wednesday, April 20, 2016 11:59 AM To: Elecraft@mailman.qth.net Subject: [Elecraft] K-Pod Question __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to jimfi...@att.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] AFSK-A with K3s
This is not AGSK A mode. It is FSK D. Sent from my iPhone ...nr4c. bill > On Apr 17, 2016, at 9:38 AM, Triconet_2 wrote: > > You and at least two dozen guys I logged doing something similar And I would > venture to guess that most of them were running K3s. > > I emailed one of these guys and got back the confession that 1) yes he was > using a K3 and 2) he was sending radioteletype with the paddle. > > The inadvertent writing of A to B while attempting to engage Split accounts > for the QRM on the DX freq, the 15 WPM RTTY with the long unmodulated tail > results from the other. (This assumes that the operator actually knows that > he is supposed to be operating split... too many don't) > >> On Apr 14, 2016, at 5:35 AM, "Gary Smith" wrote: >> >> In fact, what I was >> transmitting was just a key down and not >> the RTTY I thought I was putting out and I >> was inadvertently QRMing every time I >> transmitted. > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Tuned VFO or Tuned Spectrum on P3 Modes?
I think what you are looking for is the menu "Fix Track". In Tracking mode the spectrum scrolls as you tune. In Fixed mode the spectrum stays put and the cursor moves. The menu choice toggles between the two. 73, Brian, K0DTJ > On Apr 20, 2016, at 09:12, Richard W Hemingway wrote: > > Hello again, > Again I am having trouble. Finding out how to change from one to the other > modes. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] SOLD K3/100
The K3 has a new home, thank you. Jim -K7BIE Sent from my iPhone __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Tuned VFO or Tuned Spectrum on P3 Modes?
Hello again, Again I am having trouble. Finding out how to change from one to the other modes. I have just received the P3 and find it complicated. Thanks, (I have t he manual and also Fred Cady's book on the K3s and the P3. Can't seem to find this in either one) Dick N5XRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K-Pod Question
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] , K3 Gold Plated Plug Replacment
The remaining tin-plated connectors are not a problem because both the pins and sockets are the same metal. The problem with the replaced connectors is that the sockets were tin-plated and the pins were gold-plated (maybe the other way around). Over time the dissimilarity of these two metals develop some coating that gradually can cause intermittent electrical connection. The fix is to replace these locations with gold-plated connections. Ed W0YK ___ Dave KD1NA wrote: I have an old K3 ( Serial # 934 ) and was starting to be plagued by interconnection problems inside of my K3 caused by the tin plated plugs. After contacting Elecraft I received 2 connector kits. One for the 100 watt power amp connections ( KPA3 ) and one for the front panel ( J30 and 35 ). Since I installed these gold plated pluge my interconnection problems seem to have gone away. I am still concerned about the remaining tin plated plugs in my K3 but Elecraft indicated that there has been no known issues with these remaining tin plated connectors. My question is has anyone who owns an old K3 experienced any other tin plated pin issues with internal K3 connectors other than the ones that Elecraft addressed? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] AFSK-A with K3s
You and at least two dozen guys I logged doing something similar And I would venture to guess that most of them were running K3s. I emailed one of these guys and got back the confession that 1) yes he was using a K3 and 2) he was sending radioteletype with the paddle. The inadvertent writing of A to B while attempting to engage Split accounts for the QRM on the DX freq, the 15 WPM RTTY with the long unmodulated tail results from the other. (This assumes that the operator actually knows that he is supposed to be operating split... too many don't) On Apr 14, 2016, at 5:35 AM, "Gary Smith" wrote: > In fact, what I was > transmitting was just a key down and not > the RTTY I thought I was putting out and I > was inadvertently QRMing every time I > transmitted. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Gold Plated Plug Replacments
No issues with #0056 (:-)) 73 K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] , K3 Gold Plated Plug Replacment
No more issues K3 #1255 73 Arie PA3A --- Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] , K3 Gold Plated Plug Replacment
I agree with Ken #2652 -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Gold-Plated-Plug-Replacment-tp7616531p7616533.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] , K3 Gold Plated Plug Replacment
I have K3 #202 and over the years I replaced all of the pin connectors that were recommended by Elecraft. I have had no issues after installing the replacements connectors. 73, Ken K3IU ~~ On 4/20/2016 8:27 AM, David Robertson wrote: Everyone, I have an old K3 ( Serial # 934 ) and was starting to be plagued by interconnection problems inside of my K3 caused by the tin plated plugs. After contacting Elecraft I received 2 connector kits. One for the 100 watt power amp connections ( KPA3 ) and one for the front panel ( J30 and 35 ). Since I installed these gold plated pluge my interconnection problems seem to have gone away. I am still concerned about the remaining tin plated plugs in my K3 but Elecraft indicated that there has been no known issues with these remaining tin plated connectors. My question is has anyone who owns an old K3 experienced any other tin plated pin issues with internal K3 connectors other than the ones that Elecraft addressed? 73 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] , K3 Gold Plated Plug Replacment
Everyone, I have an old K3 ( Serial # 934 ) and was starting to be plagued by interconnection problems inside of my K3 caused by the tin plated plugs. After contacting Elecraft I received 2 connector kits. One for the 100 watt power amp connections ( KPA3 ) and one for the front panel ( J30 and 35 ). Since I installed these gold plated pluge my interconnection problems seem to have gone away. I am still concerned about the remaining tin plated plugs in my K3 but Elecraft indicated that there has been no known issues with these remaining tin plated connectors. My question is has anyone who owns an old K3 experienced any other tin plated pin issues with internal K3 connectors other than the ones that Elecraft addressed? 73 -- Dave Robertson KD1NA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com