[Elecraft] UNSUBSCRIBE

[n3khk_john]

UNSUBSCRIBE

 

 

 

73 ES CUL DE N3KHK

Mr. John R. Klim II, N3KHK

Life member: ARRL, AMSAT LM-2187, 10-10 (68135), NCDXA, QCWA

Member: 30MDG (1874), FISTS (5015), PVRC 

Springbok Chapter (1874), Chesapeake Bay
Chapter (549)

QSL:   LoTW, Bureau, Direct, eQSL as a courtesy

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KX3 CW Memories

[Tom Field]

I am unable to erase the CW Memories in my KX3. I've followed the procedure
in the Owners Manual and in Fred Cady's book.
Would appreciate any help.

Tom
KN6DR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Monitor in SSB sounds "crummy" K3s?

[HankP]

resend to reflector because your email was blocked by spamcop - my lousy 
Centurlylink email system . Ken - I have watched this thread for awhile - while 
I have never had this issue - (with K3 7536) - sometimes when all else fails , 
trying an EEINT process is worth while ( I call that my Elecraft one finger 
salute - ala my 3 ORION s one finger salute when they lost their mind- which 
was a hell of a lot more often than my K3) Incidentally - I saw some talk about 
processing etc - my monitor if I select FASt sounds like my normal voice no EQ 
or processing - switching MON to nor - the TX EQ and processing is VERY 
apparent . Good luck --- Hank K7HP - Original Message -
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Rx antenna for K3's 2nd receiver

[Ken G Kopp]

My K3's second receiver is connected directly to the BNC antenna connector
with a TMP M/F jumper cable I made, and is permanently connected to a 6M
omni antenna.  It's (only) used for listening for 6M openings.

73

Ken - K0PP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Field Day Report

[Bill Conkling]

At K4RC, I made 8 on 80 m PSK31 and about 21 on RTTY on 20 and 40 M.  I only 
worked about an hour or so at times when the Phone station was between 
operators.

…bc  mr4c

> On Jul 1, 2016, at 6:22 PM, Bill Frantz  wrote:
> 
> Out of curiosity, what digital modes did people use to make contacts at Field 
> Day. Our operation got good results from PSK31 and RTTY, but did not try 
> other modes.
> 
> 73 Bill AE6JV
> 
> ---
> Bill Frantz| "The only thing we have to   | Periwinkle
> (408)356-8506  | fear is fear itself." - FDR  | 16345 Englewood Ave
> www.pwpconsult.com | Inaugural address, 3/4/1933  | Los Gatos, CA 95032
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] kt0ny

[Dave Cole]

On Fri, 2016-07-01 at 19:59 -0400, Charlie T, K3ICH wrote:
> You DO know that anything you "delete" is actually stored in the "Re-
> Cycle
> Bin" right?  It can be recovered by simply going to the Re-Cycle Bin
> and
> there it is.
> 
> If you delete it from the Re-Cycle Bin, it is truly gone forever
> (unless
> you're a computer forensic guru).
> 
> 73, Charlie k3ICH
> 

You should also know that anything you empty from the Recycle Bin, is
trivial to make come back from the dead...  If you want to wipe
something overwrite it a few times with FF and 00.
-- 

73's, and thanks,
Dave (NK7Z)
For software/hardware reviews see:
http://www.nk7z.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Monitor in SSB sounds "crummy" K3s?

[Don Wilhelm]

Ken,

Do you have the TX EQ *and the RX EQ set to zero for all bands?
The monitor can give you a double-whammy since it feeds through both 
equalizers if I recall correctly.


73,
Don W3FPR

On 7/1/2016 7:29 PM, Ken Arck wrote:
Of course I'm not using the speaker for monitoring SSB - I have tried 
the Koss 40, 45 and Heil headsets, all with the same result. I've also 
been careful not to overdrive either the mic(s) nor headphones.


Unfortunately I do not have the DVR but let's face it...listening on 2 
other radios should give me a fairly accurate portrayal of how my SSB 
signal sounds (yes, RF gain down so as not to overload the local 
radios) and MONITOR simply doesn't


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [K3, k3S] Panadapter for the Sub Receiver

[tomb18]

HiOne thing missing is software support. A key api command is missing for the 
subreceiver and is unlikely to be made available.So, it's an ok mod to get an 
overview of an area of the airwaves,  but not accurate enough for serious 
use.73 Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Bill Frantz  
Date: 2016-07-01  6:04 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
Re: [Elecraft] [K3, k3S] Panadapter for the Sub Receiver 
Thanks Don.

Part of my reasoning for posting was that this feature might 
increase sales of P3s. Given the relative lack of interest, I 
think it remains a user mod. (But my K3 might look nice with 2 
P3s on top of it. :-)

73 Bill AE6JV

On 7/1/16 at 5:28 AM, donw...@embarqmail.com (Don Wilhelm) wrote:

>Bill,
>
>Getting the IF output from the subRX is not a problem, but 
>adding the 'new protocols' would likely be a problem.
>
>So if you just want to monitor the band around wherever the 
>subRX is tuned, that part is easy, just add an IF output to the 
>subRX. I have done that to one customer's K3, it is not difficult.
>
>73,
>Don W3FPR
>
>On 7/1/2016 1:49 AM, Bill Frantz wrote:
>>One of our field day operators announced that while he was 
>>making QSOs on active bands, he was going to use the sub 
>>receiver in his K3 to scan for 10M CW activity. It occurred to 
>>me that this kind of scanning would be a lot easier if you 
>>could attach a second P3 to the K3 sub receiver.
>>
>>It seems simple. You would need an IF out from the sub 
>>receiver, and some new protocols on the aux bus. e.g. QSY on 
>>the sub P3 QSYs the sub receiver. etc.
>>
>
---
Bill Frantz    |The nice thing about standards| Periwinkle
(408)356-8506  |is there are so many to choose| 16345 
Englewood Ave
www.pwpconsult.com |from.   - Andrew Tanenbaum    | Los Gatos, 
CA 95032

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [K3, k3S] for the Sub Receiver

[Don Wilhelm]

Leroy,

The subRX will normally use the transmit antenna, be that ANT1 or ANT2 - 
there is a 3 dB splitter inserted to feed both the main and the subRX.


Now --- *if* (and only if) you select the AUX antenna for the subRX, 
then the antenna connection that you have plugged into the rear of the 
subRX will be used - whether that be the BNC connector or the 
non-transmit antenna.


So decide on which TMP cable you want to connect to the subRX AUX ANT input.
If you want it to be a receiving antenna, then I think it is best to 
connect the BNC jack.
If instead you have two antennas, both of which are transmit capable, 
then you may want to connect the subRX AUX ANT to the KAT3.  When the 
subRX AUX antenna is selected, receive for the subRX will be from the 
non-transmit antenna - in other words, if you select ANT1, the subRX 
will use ANT2 - and vice-versa.


73,
Don W3FPR


On 7/1/2016 7:44 PM, lmarion wrote:
I have a different subreceiver question:   The configuration selection 
is bnc or ANTtuner ant 2. Does it require a separate antenna?   I 
thought the subreceiver would use a pickoff of the current antenna or 
a separate antenna.




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [K3, k3S] for the Sub Receiver

[Dick Dievendorff]

There are figures on pages 43 thru 45 of the K3S owner's manual (and similar
pictures are in the K3 owner's manual)

There are two relays that route signal to the sub RX. 

One of the options you have is picking the sub receiver's input from the
main rx antenna path. That's the one I use.  Tap ANT while in BSET to choose
main path or AUX RF source.  

Dick, K6KR

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
lmarion
Sent: Friday, July 1, 2016 16:45
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3, k3S] for the Sub Receiver

I have a different subreceiver question:   The configuration selection is 
bnc or ANTtuner ant 2. Does it require a separate antenna?   I thought the 
subreceiver would use a pickoff of the current antenna or a separate
antenna.

Thanks, confused Leroy AB7CE

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to d...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Monitor in SSB sounds "crummy" K3s?

[Fred Jensen]

Ken, I think there's something wrong.  I don't frequent SSB much but 
when I do the monitor always sounds fine.  I just tried my K3 #642, 
fairly long in the tooth but with a fairly late FW if not the latest, 
and I sound just fine to myself, for whatever that's worth.  There are 
so many new menu choices since I first built mine, it's possible there 
could be something there ... like CONFIG:MONITOR CRUMMY/GOOD :-)), but I 
really doubt it.  How does it sound on CW or RTTY or other digital mode? 
 You may be at the "call Elecraft" point.


73,

Fred K6DGW
- Northern California Contest Club
- CU in the Cal QSO Party 1-2 Oct 2016
- www.cqp.org

On 7/1/2016 4:29 PM, Ken Arck wrote:

Of course I'm not using the speaker for monitoring SSB - I have tried
the Koss 40, 45 and Heil headsets, all with the same result. I've also
been careful not to overdrive either the mic(s) nor headphones.

Unfortunately I do not have the DVR but let's face it...listening on 2
other radios should give me a fairly accurate portrayal of how my SSB
signal sounds (yes, RF gain down so as not to overload the local radios)
and MONITOR simply doesn't

Ken


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] kt0ny

[Charlie T, K3ICH]

You DO know that anything you "delete" is actually stored in the "Re-Cycle
Bin" right?  It can be recovered by simply going to the Re-Cycle Bin and
there it is.

If you delete it from the Re-Cycle Bin, it is truly gone forever (unless
you're a computer forensic guru).

73, Charlie k3ICH



-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of john
votano via Elecraft
Sent: Friday, July 01, 2016 3:46 PM
To: Ai4PF 
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] kt0ny

 


Sent from my iPhone

> On Jul 1, 2016, at 2:22 PM, Ai4PF  wrote:
> 
> Hello Tony: Accidentally deleted your e mail response to my question, 
> and just wanted to say thanks. I do not have a KX3. Is there any other 
> way I can check and correct my wspr drift?
> 
> Bill, Ai4PF
> 
> 
> 
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/kt0ny-tp7619483.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> k...@yahoo.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to pin...@erols.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [K3, k3S] for the Sub Receiver

[lmarion]

I have a different subreceiver question:   The configuration selection is 
bnc or ANTtuner ant 2. Does it require a separate antenna?   I thought the 
subreceiver would use a pickoff of the current antenna or a separate 
antenna.


Thanks, confused Leroy AB7CE

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Monitor in SSB sounds "crummy" K3s?

[Ken Arck]

Of course I'm not using the speaker for monitoring SSB - I have tried 
the Koss 40, 45 and Heil headsets, all with the same result. I've 
also been careful not to overdrive either the mic(s) nor headphones.


Unfortunately I do not have the DVR but let's face it...listening on 
2 other radios should give me a fairly accurate portrayal of how my 
SSB signal sounds (yes, RF gain down so as not to overload the local 
radios) and MONITOR simply doesn't


Ken


At 02:52 PM 7/1/2016, Don Wilhelm wrote:

Ken,

Is the Monitor level too high?
Are you using speakers for the monitor audio?  That will certainly 
cause feedback because the mic will pick up sound from the 
speakers.  You can use headphones with high isolation.


I would suggest a better way to evaluate the microphone response is 
to make a recording and then play it back.  If you have the DVR 
installed, that is a perfect tool for doing that recording.  If no 
DVR, use the monitor to send audio to your computer soundcard and 
record it with an application like Audacity (an open source and free 
audio editor).


The intent of the monitor function is to give the user of headphones 
some audio in the phones because it is easier than speaking into a 
microphone without that acoustical reinforcement.  For that purpose, 
it does not have to represent the full audio response - but I agree 
it should not be distorted by design.


73,
Don W3FPR

On 7/1/2016 5:31 PM, Ken Arck wrote:

Hi all

I've been trying to set up a couple different microphones with my 
K3s and have noticed they all sound horrible using MONITOR but on 
another radio, they sound good. Specifically, it doesn't take much 
level before they sound distorted, and way too."midrangy?" 
whereas listening to it on 2 other local radios they sound fine.


--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Help: Speed/Mic dial not working on K3

[jlbates4]

Strange problem:  After the last firmware upgrade, my Speed/Mic dial will not
change the speed or mic settings.  I can press the dial and switch between
the Speed & Mic options - but can't change the settings!

Any help or suggestions would be really appreciated!

73 de K8OI



-
K8OI
mailto:jlbat...@gmail.com
(804) 592-1068
--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Help-Speed-Mic-dial-not-working-on-K3-tp7619497.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KXPD2 shipping status

[Joe W2KJ]

Howdy Gang:

Has anyone heard of the KXPD2 paddle shipping yet?

Thanks for any info.

73, Joe W2KJ
KX2 s/n 347
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K-Pod (K-nob) shipping update

[Jim Finan]

‎Received a shipping message from Elecraft. Looks like my K-pod may have 
shipped. Also received a pre-ship notice about it a day or two ago verifying 
address, etc. 

Maybe Tuesday ‎

73,

Jim
AB4AC 
Jim Finan

Sent from my BlackBerry 10 smartphone.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Field Day Report

[Bill Frantz]

Out of curiosity, what digital modes did people use to make 
contacts at Field Day. Our operation got good results from PSK31 
and RTTY, but did not try other modes.


73 Bill AE6JV

---
Bill Frantz| "The only thing we have to   | Periwinkle
(408)356-8506  | fear is fear itself." - FDR  | 16345 
Englewood Ave
www.pwpconsult.com | Inaugural address, 3/4/1933  | Los Gatos, 
CA 95032


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Monitor in SSB sounds "crummy" K3s?

[Ted Bryant]

 Is CONFIG: TX MON set to "nor" or "FAST"?  Whichever it is, try the other one.

73, Ted W4NZ

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken Arck
Sent: Friday, July 01, 2016 5:59 PM
To: Gary; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Monitor in SSB sounds "crummy" K3s?

Everything from a Koss 40, Koss 45, Heil BM10 and even an old Turner 454C! And 
yes, I know about the bias issue. Again, they all sound good on a different 
radio (over the air) but horrible using MONITOR

Ken


At 02:50 PM 7/1/2016, Gary wrote:
>I imagine you have already set tx/rx EQ, set Bias on/off depending on 
>the mic insert?
>
>What is the model MIC?
>
>Gary
>
>--
>From: Ken Arck
>Sent: ‎2/‎07/‎2016 7:32 AM
>To: elecraft@mailman.qth.net
>Subject: [Elecraft] Monitor in SSB sounds "crummy" K3s?
>
>Hi all
>
>I've been trying to set up a couple different microphones with my K3s 
>and have noticed they all sound horrible using MONITOR but on another 
>radio, they sound good. Specifically, it doesn't take much level before 
>they sound distorted, and way too."midrangy?" whereas listening to 
>it on 2 other local radios they sound fine.
>
>So am I overlooking something? I can't imagine the MONITOR audio path 
>would be that bad by design
>
>Ken
>---
>--- President and CTO - Arcom Communications Makers of repeater 
>controllers and accessories.
>http://www.arcomcontrollers.com/
>Authorized Dealers for Kenwood and Telewave and we offer complete 
>repeater packages!
>AH6LE/R - IRLP Node 3000
>http://www.irlp.net
>"We don't just make 'em. We use 'em!"
>
>__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net Please help support this email 
>list: http://www.qsl.net/donate.html Message delivered to 
>vk1zzg...@gmail.com

--
President and CTO - Arcom Communications Makers of repeater controllers and 
accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and we offer complete repeater 
packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to w...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [K3, k3S] Panadapter for the Sub Receiver

[Bill Frantz]

Thanks Don.

Part of my reasoning for posting was that this feature might 
increase sales of P3s. Given the relative lack of interest, I 
think it remains a user mod. (But my K3 might look nice with 2 
P3s on top of it. :-)


73 Bill AE6JV

On 7/1/16 at 5:28 AM, donw...@embarqmail.com (Don Wilhelm) wrote:


Bill,

Getting the IF output from the subRX is not a problem, but 
adding the 'new protocols' would likely be a problem.


So if you just want to monitor the band around wherever the 
subRX is tuned, that part is easy, just add an IF output to the 
subRX. I have done that to one customer's K3, it is not difficult.


73,
Don W3FPR

On 7/1/2016 1:49 AM, Bill Frantz wrote:
One of our field day operators announced that while he was 
making QSOs on active bands, he was going to use the sub 
receiver in his K3 to scan for 10M CW activity. It occurred to 
me that this kind of scanning would be a lot easier if you 
could attach a second P3 to the K3 sub receiver.


It seems simple. You would need an IF out from the sub 
receiver, and some new protocols on the aux bus. e.g. QSY on 
the sub P3 QSYs the sub receiver. etc.





---
Bill Frantz|The nice thing about standards| Periwinkle
(408)356-8506  |is there are so many to choose| 16345 
Englewood Ave
www.pwpconsult.com |from.   - Andrew Tanenbaum| Los Gatos, 
CA 95032


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Monitor in SSB sounds "crummy" K3s?

[Ken Arck]

Everything from a Koss 40, Koss 45, Heil BM10 and 
even an old Turner 454C! And yes, I know about 
the bias issue. Again, they all sound good on a 
different radio (over the air) but horrible using MONITOR


Ken


At 02:50 PM 7/1/2016, Gary wrote:
I imagine you have already set tx/rx EQ, set 
Bias on/off depending on the mic insert?


What is the model MIC?

Gary

--
From: Ken Arck
Sent: ‎2/‎07/‎2016 7:32 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Monitor in SSB sounds "crummy" K3s?

Hi all

I've been trying to set up a couple different microphones with my K3s
and have noticed they all sound horrible using MONITOR but on another
radio, they sound good. Specifically, it doesn't take much level
before they sound distorted, and way too."midrangy?" whereas
listening to it on 2 other local radios they sound fine.

So am I overlooking something? I can't imagine the MONITOR audio path
would be that bad by design

Ken
--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to vk1zzg...@gmail.com


--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Monitor in SSB sounds "crummy" K3s?

[Don Wilhelm]

Ken,

Is the Monitor level too high?
Are you using speakers for the monitor audio?  That will certainly cause 
feedback because the mic will pick up sound from the speakers.  You can 
use headphones with high isolation.


I would suggest a better way to evaluate the microphone response is to 
make a recording and then play it back.  If you have the DVR installed, 
that is a perfect tool for doing that recording.  If no DVR, use the 
monitor to send audio to your computer soundcard and record it with an 
application like Audacity (an open source and free audio editor).


The intent of the monitor function is to give the user of headphones 
some audio in the phones because it is easier than speaking into a 
microphone without that acoustical reinforcement.  For that purpose, it 
does not have to represent the full audio response - but I agree it 
should not be distorted by design.


73,
Don W3FPR

On 7/1/2016 5:31 PM, Ken Arck wrote:

Hi all

I've been trying to set up a couple different microphones with my K3s 
and have noticed they all sound horrible using MONITOR but on another 
radio, they sound good. Specifically, it doesn't take much level 
before they sound distorted, and way too."midrangy?" whereas 
listening to it on 2 other local radios they sound fine.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Monitor in SSB sounds "crummy" K3s?

[Gary]

I imagine you have already set tx/rx EQ, set Bias on/off depending on the mic 
insert?

What is the model MIC?

Gary

-Original Message-
From: "Ken Arck" 
Sent: ‎2/‎07/‎2016 7:32 AM
To: "elecraft@mailman.qth.net" 
Subject: [Elecraft] Monitor in SSB sounds "crummy" K3s?

Hi all

I've been trying to set up a couple different microphones with my K3s 
and have noticed they all sound horrible using MONITOR but on another 
radio, they sound good. Specifically, it doesn't take much level 
before they sound distorted, and way too."midrangy?" whereas 
listening to it on 2 other local radios they sound fine.

So am I overlooking something? I can't imagine the MONITOR audio path 
would be that bad by design

Ken
--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to vk1zzg...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Monitor in SSB sounds "crummy" K3s?

[Ken Arck]

Hi all

I've been trying to set up a couple different microphones with my K3s 
and have noticed they all sound horrible using MONITOR but on another 
radio, they sound good. Specifically, it doesn't take much level 
before they sound distorted, and way too."midrangy?" whereas 
listening to it on 2 other local radios they sound fine.


So am I overlooking something? I can't imagine the MONITOR audio path 
would be that bad by design


Ken
--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3S no output?

[John Langdon]

On all bands even into dummy load

 

Not in TEST

 

TX INH OFF

 

In TUNE main display "-" and "0 W"

 

Other rig works fine into same antennas/dummy load with normal SWR
indicated.

 

Anybody been there done that?

 

 

73 John N5CQ

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] kt0ny

[john votano via Elecraft]

 


Sent from my iPhone

> On Jul 1, 2016, at 2:22 PM, Ai4PF  wrote:
> 
> Hello Tony: Accidentally deleted your e mail response to my question, and
> just wanted to say thanks. I do not have a KX3. Is there any other way I can
> check and correct my wspr drift?
> 
> Bill, Ai4PF
> 
> 
> 
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/kt0ny-tp7619483.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k...@yahoo.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] kt0ny

[Tony Estep]

Hi Bill,

Sorry, I did not notice that your original email referred to the K3 until I
had already sent a reply. I'll be darned if I know why the database isn't
reflecting your transmissions with the K3, since drift is essentially zero
(at least with mine). I assume you're xmting on the right frequency, which
of course you will be if you are decoding signals okay. The only way I know
to check for such a close freq tolerance is to run a WSPR listening program
on another rig. A no-drift signal will be a perfect horizontal line, while
a drifty one will show up as a curve. Maybe you can check with a nearby
ham...?

Do you have the transmit audio gain set right? When WSPR is transmitting,
you should show 4 dots, with the 5th just flickering. Here's a word from
the expert. It refers to PSK, but the same applies to WSPR:

http://www.mail-archive.com/elecraft%40mailman.qth.net/msg167922.html


best of luck,
Tony KT0NY


On Fri, Jul 1, 2016 at 1:22 PM, Ai4PF  wrote:

> Hello Tony: Accidentally deleted your e mail response to my question, and
> just wanted to say thanks. I do not have a KX3. Is there any other way I
> can
> check and correct my wspr drift?
>
> Bill, Ai4PF
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/kt0ny-tp7619483.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to estept...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Using yet another low cost headset with Elecraft Transceivers at 2016 Field Day

[Ron D'Eau Claire]

Where there is adequate total volume, a simple in-line control is cheap and 
effective. 

http://www.mycablemart.com/store/cart.php?m=product_detail&p=5467&gclid=CjwKEAjwqdi7BRCL6Zmjk5-rsTwSJABmrVab5rmhfLJ2Gy7w_nq8OCVR_CCA5Adrxj4Lsgv5EYhejhoCFHrw_wcB

Just set the master rig volume high enough for the deafest user, and everyone 
else can turn it down with their in-line control.

73, Ron AC7AC

-Original Message-

> On Jul 1, 2016, at 10:19 AM, James kvochick  wrote:
> 
> In my geography, there is a definite divide relative to spending money on 
> radio gear.  On one hand, there are so many of us that own and use Elecraft 
> gear, the joke is that I’m the President of JERK (Jim’s Elecraft Radio Klub).
> On the other side of the ledger, unless they get the equipment for free, they 
> are probably not interested.
> 
> Many of us bring our complete K3 stations to Field Day.  This actually gives 
> lots of folks who show up the chance to operate a really well integrated 
> radio environment.  We choose to activate an Emergency Operations Center 
> (EOC) for our Field Day event, which also means lots of radios, operators, 
> and loggers in close proximity.  Headset are a must, but the real question 
> is, what headset?  There were some other challenges, most notably the ability 
> to control the volume level at each headset.  Getting an operator and a 
> logger to agree on a volume level ranks right after gaining world peace.
> 
> This year, we experimented with a very low cost gaming headset.  You can read 
> about it here:
> 
> http://www.microcenter.com/product/426836/Stereo_Gaming_Headset_-_Blac
> k 
>  ck>
> 
> At $7.99 plus tax, the price is right, even for the more “frugal” among us.
> 
> There were a couple of minor issues during implementation, but we were able 
> to easily navigate through them.  On the Elecraft Radios, the headsets were 
> amazing!  We even had happy operators and logging personnel, each being able 
> to adjust the audio level with the inline volume controls!
> 
> If you choose to, you can read more details about our experience here:
> 
> 
> https://k8jk.wordpress.com/2016/07/01/low-cost-headsets-for-field-day/ 
>  />
> 
> 
> DISCLAIMERS
> 
> It doesn’t mean that your choice for a headset is any better or worse than 
> this one - I’m just sharing our experience.
> 
> There was no lab analysis performed.
> 
> I am not fiscally connected to Microcenter or Elecraft in any income 
> producing way….however both of them do wind up with lots of my $$$
> 
> 
> 73
> 
> Jim K8JK

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Let me build your K2

[Alan Price]

I have built hundreds of K2's and other Elecraft kits.  My prices are 
reasonable and you receive a new radio with the options you want.


73

Alan

W1HYV

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] kt0ny

[Ai4PF]

Hello Tony: Accidentally deleted your e mail response to my question, and
just wanted to say thanks. I do not have a KX3. Is there any other way I can
check and correct my wspr drift?

Bill, Ai4PF



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/kt0ny-tp7619483.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KX2 Evaluation Up Date

[Jim GM]

 I worked 15 stations on Field Day weekend with in an hour on my 160m antenna 
on 20M. Worked just fine.

Started to use N1MM logging and attested programming F keys for CW found the 
infor on line and help from K9JWV got it working through only ONE USB port. Do 
not know what the KY codes are or where they came from.  Some of the function 
keys on the program needs to be reprogrammed in N1MM and have not found out 
where or what to put in yet.  Progress is slow but making progress.

Showed off my New KX2 at about 4 Field Day sites and most were impressed on the 
size and what it could do. I did not have N1MM working at the time. Maybe I 
would have gotten  more jaws dropped if I had that Canadian program running. No 
one afford to connect my KX2 to their Field Day antenna and give it a ride.  I 
found that strange.  Maybe I should have offered  Found that a bit strange

Now if I can switch the keys with Windows 10 and just let the F buttons work 
like F buttons and not  do brightness and the sort, I will be in good shape.

Jim K9TF

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Using yet another low cost headset with Elecraft Transceivers at 2016 Field Day

[Walter Underwood]

If the headsets don’t have volume controls, you can use a simple headphone 
distribution amplifier. Pretty much the same thing is made by several 
companies. I have the Behringer HA400.

http://www.bhphotovideo.com/c/product/373745-REG/Behringer_HA400_HA_400_Headphone.html
 


wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On Jul 1, 2016, at 10:19 AM, James kvochick  wrote:
> 
> In my geography, there is a definite divide relative to spending money on 
> radio gear.  On one hand, there are so many of us that own and use Elecraft 
> gear, the joke is that I’m the President of JERK (Jim’s Elecraft Radio Klub).
> On the other side of the ledger, unless they get the equipment for free, they 
> are probably not interested.
> 
> Many of us bring our complete K3 stations to Field Day.  This actually gives 
> lots of folks who show up the chance to operate a really well integrated 
> radio environment.  We choose to activate an Emergency Operations Center 
> (EOC) for our Field Day event, which also means lots of radios, operators, 
> and loggers in close proximity.  Headset are a must, but the real question 
> is, what headset?  There were some other challenges, most notably the ability 
> to control the volume level at each headset.  Getting an operator and a 
> logger to agree on a volume level ranks right after gaining world peace.
> 
> This year, we experimented with a very low cost gaming headset.  You can read 
> about it here:
> 
> http://www.microcenter.com/product/426836/Stereo_Gaming_Headset_-_Black 
> 
> 
> At $7.99 plus tax, the price is right, even for the more “frugal” among us.
> 
> There were a couple of minor issues during implementation, but we were able 
> to easily navigate through them.  On the Elecraft Radios, the headsets were 
> amazing!  We even had happy operators and logging personnel, each being able 
> to adjust the audio level with the inline volume controls!
> 
> If you choose to, you can read more details about our experience here:
> 
> 
> https://k8jk.wordpress.com/2016/07/01/low-cost-headsets-for-field-day/ 
> 
> 
> 
> DISCLAIMERS
> 
> It doesn’t mean that your choice for a headset is any better or worse than 
> this one - I’m just sharing our experience.
> 
> There was no lab analysis performed.
> 
> I am not fiscally connected to Microcenter or Elecraft in any income 
> producing way….however both of them do wind up with lots of my $$$
> 
> 
> 73
> 
> Jim K8JK
> 
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wun...@wunderwood.org

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Using yet another low cost headset with Elecraft Transceivers at 2016 Field Day

[James kvochick]

In my geography, there is a definite divide relative to spending money on radio 
gear.  On one hand, there are so many of us that own and use Elecraft gear, the 
joke is that I’m the President of JERK (Jim’s Elecraft Radio Klub).
On the other side of the ledger, unless they get the equipment for free, they 
are probably not interested.

Many of us bring our complete K3 stations to Field Day.  This actually gives 
lots of folks who show up the chance to operate a really well integrated radio 
environment.  We choose to activate an Emergency Operations Center (EOC) for 
our Field Day event, which also means lots of radios, operators, and loggers in 
close proximity.  Headset are a must, but the real question is, what headset?  
There were some other challenges, most notably the ability to control the 
volume level at each headset.  Getting an operator and a logger to agree on a 
volume level ranks right after gaining world peace.

This year, we experimented with a very low cost gaming headset.  You can read 
about it here:

http://www.microcenter.com/product/426836/Stereo_Gaming_Headset_-_Black 


At $7.99 plus tax, the price is right, even for the more “frugal” among us.

There were a couple of minor issues during implementation, but we were able to 
easily navigate through them.  On the Elecraft Radios, the headsets were 
amazing!  We even had happy operators and logging personnel, each being able to 
adjust the audio level with the inline volume controls!

If you choose to, you can read more details about our experience here:


https://k8jk.wordpress.com/2016/07/01/low-cost-headsets-for-field-day/ 



DISCLAIMERS

It doesn’t mean that your choice for a headset is any better or worse than this 
one - I’m just sharing our experience.

There was no lab analysis performed.

I am not fiscally connected to Microcenter or Elecraft in any income producing 
way….however both of them do wind up with lots of my $$$


73

Jim K8JK



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [K3, k3S] Panadapter for the Sub Receiver

[Don Wilhelm]

Bill,

Getting the IF output from the subRX is not a problem, but adding the 
'new protocols' would likely be a problem.


So if you just want to monitor the band around wherever the subRX is 
tuned, that part is easy, just add an IF output to the subRX. I have 
done that to one customer's K3, it is not difficult.


73,
Don W3FPR

On 7/1/2016 1:49 AM, Bill Frantz wrote:
One of our field day operators announced that while he was making QSOs 
on active bands, he was going to use the sub receiver in his K3 to 
scan for 10M CW activity. It occurred to me that this kind of scanning 
would be a lot easier if you could attach a second P3 to the K3 sub 
receiver.


It seems simple. You would need an IF out from the sub receiver, and 
some new protocols on the aux bus. e.g. QSY on the sub P3 QSYs the sub 
receiver. etc.




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3s & FM filter

[Don Wilhelm]

Gary,

You must use the 2.8 (or 2.7)kHz filter for SSB, Data, and CW transmit.
The 13kHz filter can be used for AM and FM transmit.

73,
Don W3FPR

On 7/1/2016 1:28 AM, Gary Smith wrote:

Wondering about re-orienting the filters between my K3 & K3s. If I
put the FM filter in my K3s, can it be safely configured to transmit
properly on SSB on all bands? Or must I use a 2.8 MHz to do this?

Thanks & 73,

Gary
KA1J
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com