Re: [Elecraft] Subject: Re: Setting the audio level for use in soundcard data modes.

[Don Wilhelm]

To further expand on Ed's suggestion,
I have set up the "Quick Memories" (1st 10 memories) to do the band 
switching.  See Quick Memories in the manual.

Once on a band, I use the M1-M4 buttons to get to the band segment I want:
M1 takes me to the CW portion with all settings set for CW,
M2 takes me to the SSB portion with all per mode settings for SSB
M3 takes me to the Data band segment with the per mode settings for DATA A.
M4 is not included, but if I am on a frequency monitoring a QSO, I can 
quickly store that band, mode, etc. information and QSY, then come back 
to that frequency, mode easily after a bit of time.


73,
Don W3FPR

On 9/14/2017 1:09 AM, Edward R Cole wrote:

Just a suggestion (or hint) for setting up DATA-A:

I programmed my K3 (and KX3) memory channels with my favorite operating 
frequencies.  Digital modes have standard sub-band or operating 
frequencies, so I set up my K3 modes (eg CW, SSB), including DATA-A 
selection for my favorite digital "channels".


Example on 6m:  I have 50.100 programmed for CW, 50.125 for USB, 50.200 
for DATA-A (eme) and 50.260 for DATA-A (msk144).  Of course the 
selection of digital modes is done in the sw (e.g. WSJT-X).  I have 
several instances of my WSJT sw set up for different digital modes so I 
only need launch that instance of sw to be up and running on a given 
mode.  Soundcard audio settings still need tweaking but the test signal 
selection in the sw makes that a quick function (I use an external 
soundcard with manual level controls).  My K3 Line In is set to 10 which 
works fine for me.


On 2m-eme I use MAP-65 which a different sw than WSJT, so 144.125 is set 
for DATA-A and I just launch MAP-65.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] (OT) FOR SALE: KX1

[stan levandowski]

KX1 serial #2967 purchased 12/08/2016 is for sale. 
Absolute mint condition.


Includes all options: KXAT1 internal ATU, KXB3080 adapter, and KXPD1. 
 Also includes Array Solutions 12 VDC @ 1 amp linear power supply.  
Shipped with all original documentation and invoices.



The KXB3080 option was built up and installed by Don Wilhelm on
01/10/2017 and the entire transceiver was inspected and adjusted by Don 
and

found to be totally within Elecraft spec.


Asking $475 and I will take care of shipping and
insurance. CONUS. PayPal.  If interested please email me offline.
Reason for selling:  I have a KX2.
73, Stan WB2LQF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] XMIT button not working?

[n6ee]

This change which disables XMIT in FSK D mode, which Wayne described as
intentional, has apparently broken the ability to assert PTT via CAT
commands.  I need this in order to implement a new feature in Writelog which
requires PTT via CAT in the FSK D mode.  

I have proven on ten different Remote Ham Radio stations that the new FSK D
mode feature in Writelog works just fine with older K3 firmware but does not
work on three RHR stations which have had their firmware upgraded to 5.5 or
later.  

How far back do we need to go with restoring the older firmware that worked? 
And, how do you restore to older firmware on the K3? Is their an archive
somewhere of old firmware releases and will they load ok with the K3
Utility?

Thanks and 73,
Ron N6EE



--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] OT: Looking for adaptor

[Martin]

Elecrafters,
for a DIY project i need an adaptor like this

http://www.friedrich-kusch.de/english-hp/Stecker/UHF-Stecker/NC-565TG.htm

but only 2/3 (or 1/2 the length) .

This adaptor is 50.7mm = 2 inch, i need abt. 38mm = 1.5 inch. 1 inch 
would work, too.

I have seen smaller ones , but can't find a source.  Any idea?


--

Ohne CW ist es nur CB..

73, Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] OT: Looking for adaptor

[Wes Stewart]

http://www.amateurradiosupplies.com/product-p/cz7518b1125.htm

On 9/14/2017 9:10 AM, Martin wrote:

Elecrafters,
for a DIY project i need an adaptor like this

http://www.friedrich-kusch.de/english-hp/Stecker/UHF-Stecker/NC-565TG.htm

but only 2/3 (or 1/2 the length) .

This adaptor is 50.7mm = 2 inch, i need abt. 38mm = 1.5 inch. 1 inch would 
work, too.

I have seen smaller ones , but can't find a source.  Any idea?




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] OT: Looking for adaptor

[Ken K6MR]

Max-Gain Systems has 1.125” and 1.75” models if one of those would work.

Ken K6MR

From: Martin
Sent: Thursday, September 14, 2017 09:12
To: elecraft@mailman.qth.net
Subject: [Elecraft] OT: Looking for adaptor

Elecrafters,
for a DIY project i need an adaptor like this

http://www.friedrich-kusch.de/english-hp/Stecker/UHF-Stecker/NC-565TG.htm

but only 2/3 (or 1/2 the length) .

This adaptor is 50.7mm = 2 inch, i need abt. 38mm = 1.5 inch. 1 inch
would work, too.
I have seen smaller ones , but can't find a source.  Any idea?


--

Ohne CW ist es nur CB..

73, Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@outlook.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] OT: Looking for adaptor

[Martin]

Problem solved. 6 minutes after my query. Wow!


Am 14.09.2017 um 18:10 schrieb Martin:

Elecrafters,
for a DIY project i need an adaptor like this

http://www.friedrich-kusch.de/english-hp/Stecker/UHF-Stecker/NC-565TG.htm

but only 2/3 (or 1/2 the length) .

This adaptor is 50.7mm = 2 inch, i need abt. 38mm = 1.5 inch. 1 inch 
would work, too.

I have seen smaller ones , but can't find a source.  Any idea?




--

Ohne CW ist es nur CB..

73, Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] XMIT button not working?

[Mark E. Musick]

Hi Ron.
You load an older firmware version as you would a new version.
Bring up the K3 utility, point it at the firmware version you want and tell
it to send the firmware to the K3.
I have many of the older firmware versions. Prior to 5.50 I have 5.38, 5.29,
5.26.
I can e-mail you which ever one you want.
I do have further back than 5.26 if you find it too has the PTT change. Just
let me know.

73,
Mark, WB9CIF

-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of n6ee
Sent: Thursday, September 14, 2017 3:34 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] XMIT button not working?

This change which disables XMIT in FSK D mode, which Wayne described as
intentional, has apparently broken the ability to assert PTT via CAT
commands.  I need this in order to implement a new feature in Writelog which
requires PTT via CAT in the FSK D mode.  

I have proven on ten different Remote Ham Radio stations that the new FSK D
mode feature in Writelog works just fine with older K3 firmware but does not
work on three RHR stations which have had their firmware upgraded to 5.5 or
later.  

How far back do we need to go with restoring the older firmware that worked?

And, how do you restore to older firmware on the K3? Is their an archive
somewhere of old firmware releases and will they load ok with the K3
Utility?

Thanks and 73,
Ron N6EE



--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to markmus...@sbcglobal.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] XMIT button not working?

[Wayne Burdick]

Ron,

XMIT was always required in FSK-D and PSK-D modes. These are “VOX-only” modes, 
like hit-the-key CW, for historical reasons. 

Several PTT assertion cases were improved long ago, and this code has been in 
use by thousands of of K3/K3S users. Please contact me directly to describe the 
exact sequence of operations you’re trying to use so I can try to duplication 
the problem.

tnx
Wayne
N6KR


> On Sep 14, 2017, at 8:33 AM, n6ee  wrote:
> 
> This change which disables XMIT in FSK D mode, which Wayne described as
> intentional, has apparently broken the ability to assert PTT via CAT
> commands.  I need this in order to implement a new feature in Writelog which
> requires PTT via CAT in the FSK D mode.  
> 
> I have proven on ten different Remote Ham Radio stations that the new FSK D
> mode feature in Writelog works just fine with older K3 firmware but does not
> work on three RHR stations which have had their firmware upgraded to 5.5 or
> later.  
> 
> How far back do we need to go with restoring the older firmware that worked? 
> And, how do you restore to older firmware on the K3? Is their an archive
> somewhere of old firmware releases and will they load ok with the K3
> Utility?
> 
> Thanks and 73,
> Ron N6EE
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] (OT) KX1 --- SOLD

[stan levandowski]

Sold - in about 10 minutes...
73, Stan WB2LQF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] OT: Looking for adaptor

[Nr4c]

Quicksilver, Amphenol and others sell 1 and 1.5 inch barrel connectors. Prob 
avail at HRO. 

Sent from my iPhone
...nr4c. bill


> On Sep 14, 2017, at 12:10 PM, Martin  wrote:
> 
> Elecrafters,
> for a DIY project i need an adaptor like this
> 
> http://www.friedrich-kusch.de/english-hp/Stecker/UHF-Stecker/NC-565TG.htm
> 
> but only 2/3 (or 1/2 the length) .
> 
> This adaptor is 50.7mm = 2 inch, i need abt. 38mm = 1.5 inch. 1 inch would 
> work, too.
> I have seen smaller ones , but can't find a source.  Any idea?
> 
> 
> -- 
> 
> Ohne CW ist es nur CB..
> 
> 73, Martin DM4iM
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] OT: Looking for adaptor

[ik4nmf]

Hi Martin,

you can try here:

https://ik5hha.jimdo.com/

73, Fausto IK4NMF

-Messaggio originale- 
From: Nr4c

Sent: Thursday, September 14, 2017 7:11 PM
To: Martin
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] OT: Looking for adaptor

Quicksilver, Amphenol and others sell 1 and 1.5 inch barrel connectors. Prob 
avail at HRO.


Sent from my iPhone
...nr4c. bill



On Sep 14, 2017, at 12:10 PM, Martin  wrote:

Elecrafters,
for a DIY project i need an adaptor like this

http://www.friedrich-kusch.de/english-hp/Stecker/UHF-Stecker/NC-565TG.htm

but only 2/3 (or 1/2 the length) .

This adaptor is 50.7mm = 2 inch, i need abt. 38mm = 1.5 inch. 1 inch would 
work, too.

I have seen smaller ones , but can't find a source.  Any idea?


--

Ohne CW ist es nur CB..

73, Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@widomaker.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ik4...@gmail.com

---
Questa email è stata esaminata alla ricerca di virus da AVG.
http://www.avg.com 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Test

[ik4nmf]

Test...
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Lulu discount code

[Irwin Darack]

Thanks, I ordered today - great price.
Fred's books are excellent. Highly recommend to anyone using a K3 or K3s
radio.

Irwin KD3TB

On Wed, Sep 13, 2017 at 3:06 PM, Edward Seeliger 
wrote:

> The correct code is SAVENOW30.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to idar...@gmail.com
>



-- 
Irwin KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Lulu discount code

[j...@kk9a.com]

I was going to buy a K3S book on Lulu using the discount code however I
could not find one.

John KK9A

Irwin Darack idarack at gmail.com
Thu Sep 14 15:55:38 EDT 2017

Thanks, I ordered today - great price.
Fred's books are excellent. Highly recommend to anyone using a K3 or K3s
radio.

Irwin KD3TB


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] OT: Looking for adaptor

[Jim Graves]

Martin I see where you have found an adapter but just for the record,
this is a great source for all types of RF connectors, wire, coax, etc.
http://www.americanradiosupply.com/
They are very reliable and are fast shipping.

Hope this helps someone,
Jim G.
W4JRG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] OT: Looking for adaptor

[Wes Stewart]

There's an LDE on this reflector.

On 9/14/2017 4:44 PM, Jim Graves wrote:

Martin I see where you have found an adapter but just for the record,
this is a great source for all types of RF connectors, wire, coax, etc.
http://www.americanradiosupply.com/
They are very reliable and are fast shipping.

Hope this helps someone,
Jim G.
W4JRG


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] OT: Looking for adaptor

[Dean L]

On Sep 14, 2017 8:02 PM, "Wes Stewart"  wrote:
There's an LDE on this reflector.

Long Delayed Echo?

73
Dean
K2WW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] OT: Looking for adaptor

[Jim Graves]

Wes, you were talking about http://www.amateurradiosupplies.com/
and I was talking about http://www.americanradiosupply.com/

Those are not exactly the same thing.

Jim G.
W4JRG

-Original Message- 
From: Wes Stewart 
Sent: Thursday, September 14, 2017 8:01 PM 
To: elecraft@mailman.qth.net 
Subject: Re: [Elecraft] OT: Looking for adaptor 


There's an LDE on this reflector.

On 9/14/2017 4:44 PM, Jim Graves wrote:

Martin I see where you have found an adapter but just for the record,
this is a great source for all types of RF connectors, wire, coax, etc.
http://www.americanradiosupply.com/
They are very reliable and are fast shipping.

Hope this helps someone,
Jim G.
W4JRG


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jrgra...@knology.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] OT: Looking for adaptor

[Ron D'Eau Claire]

Eggzactly! Acronyms are for creating confusion and misunderstanding outside
of a small select group, not for communicating with others in general.

73, Ron AC7AC

-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dean L
Sent: Thursday, September 14, 2017 5:20 PM
To: Wes Stewart; Elecraft Mail List
Subject: Re: [Elecraft] OT: Looking for adaptor

On Sep 14, 2017 8:02 PM, "Wes Stewart"  wrote:
There's an LDE on this reflector.

Long Delayed Echo?

73
Dean
K2WW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to r...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] OT: Looking for adaptor

[Jim Brown]

On 9/14/2017 5:55 PM, Jim Graves wrote:

Wes, you were talking about http://www.amateurradiosupplies.com/
and I was talking about http://www.americanradiosupply.com/


The original post was from Germany. I don't know about the quality of 
"no-name" connectors in EU, but in NA, the quality is generally quite 
poor. When I got back on the air in 2003 after more than 20 years of 
inactivity, I re-stocked by parts stash with an assorted bunch of at 
least 40-50 adapters. Prices ranged from about $2 to about $3. Over a 
4-5 year period, those connectors and adapters turned out to be junk 
that caused me nearly a dozen problems, many of which were not easy to 
troubleshoot or fix.


There are many common defects. Pin diameters out of tolerance so that 
connectors don't mate reliably, dielectrics that melt when you try to 
solder, metals that don't take solder, connectors that physically fall 
apart, Tee connectors where the male and female center pin are connected 
by a tiny spring that melts with high power, intermittent connections, etc.


Here in NA, Amphenol is the trusted mfr. They're more expensive, and the 
adapters are a LOT more expensive, but they don't suffer from the 
defects described above.  Likewise, vintage surplus MIL-type connectors 
and adapters (usually with type-numbers stamped into them) are still 
found at major hamfests, and are nearly always of very good quality.


My absolute rule is, if it isn't one of those vintage MIL-types or if it 
doesn't say Amphenol, it's probably JUNK. Exception -- if you're a 
manufacturer and can verify the quality of parts from other 
manufacturers. Few of us fall into that category.


There are similar issues with audio connectors. Neutrik and Switchraft 
are the good mfrs.


73, Jim K9YC

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com