[Elecraft] Elecraft CW Net Announcement

[kev...@coho.net]

Good Evening,
  After a cold, wet week the sun is out for the weekend.  High of 60 
today.  Too bad there are not more leafy trees up here because in the 
valleys they are reaching peak color.  I do have a few vine maple but 
the colder air is settling much lower down the mountain so they have yet 
to change.  More rain is due Tuesday but it would be better if it 
traveled a few hundred miles south.  The folks in California could use a 
month of rain.


The sun is blank as it has been for six days.  SFU is at 70 but we are 
getting auroras in the north.  I expect QSB of various types and some 
whistling, crackling, and hissing.  If it were easy it would not be as 
much fun.


Please join us tomorrow on:
   14050 kHz at 2200z Sunday (3 PM PDT Sunday)
    7045 kHz at z Monday (5 PM PDT Sunday)

    73,
    Kevin. KD5ONS

_

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K1 Bezel

[Don Wilhelm]

Jon,

The best bet is Elecraft, p/n E100108 - Acrylic Display Bezel.  Contact 
sales at Elecraft 831-763-4211 to order.
If you want your own name and call (or anything else that you want) 
engraved on the bezel, contact Arkay Engraving (do it soon, Ken is 
retiring) http://www.arkayengravers.com/


73,
Don W3FPR

On 10/14/2017 8:46 PM, JJ wrote:

Good evening all,
I picked up a nice K1 yesterday at NearFest.  The bezel has the previous
owner/builder's name and call engraved in the bezel.  Does anyone have a
nice un-engraved bezel that they'd like to sell?
I figured I'd ask here before I try Elecraft.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K1 Bezel

[JJ]

Good evening all,
I picked up a nice K1 yesterday at NearFest.  The bezel has the previous
owner/builder's name and call engraved in the bezel.  Does anyone have a
nice un-engraved bezel that they'd like to sell?
I figured I'd ask here before I try Elecraft.
Thanks,
Jon WS1K
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Recent Thread on Powering Down K-3

[Nr4c]

You power off with the Pwr button K3/0 and it shuts down the remote radio. It 
turns On the remote with a short connection to a pin on the Accy 2 connector. 

Sent from my iPhone
...nr4c. bill


> On Oct 14, 2017, at 7:24 AM, Richard C Bean  wrote:
> 
> 
> If one has to turn the K-3 off only via the power switch, how does the K-3 
> work when used with the K-3/0 remote head?  I have just purchased that and 
> its accessories (RemoteRig boxes, etc.) but I have not yet set it up.  
> 
> Thanks and 73,
> 
> 
> Dick, K1HC
> 
> 
> 
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KIO3B Audio I/O PCB Assembly

[Ted Edwards W3TB]

Interesting to read, Clay.
I just this month got the P3 Panadaptor and had problems at their
connections to the KIO3B.
I thought it was fixed when they sent me a new cable for the P3, but now it
is back on an intermittant basis and my connection to the computer USB has
gone, too.  I really do think it is within the daughter-board, but there is
nothing I can see there -- even looked for a cold solder joint through a
jeweler's loop.  Now I am really stuck...

On Sat, Oct 14, 2017 at 3:38 AM, Clay Autery  wrote:

> Anyone have a slick way of securing the KIO3B Audio I/O PCB
> Assembly when installed so it doesn't wiggle up and down every time you
> make/break a connection.
>
> Drives me nuts and can't be good for longevity on the multi-pin connector.
>
> 73,
>
> --
> __
> Clay Autery, KY5G
> MONTAC Enterprises
> (318) 518-1389
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@gmail.com
>



-- 
73 de Ted Edwards, W3TB and GØPWW

and thinking about operating CW:
"Do today what others won't,
so you can do tomorrow what others can't."
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KRC2 does not communicate with CPU

[Gordon LaPoint]

I have 2 KRC2's, one is working correctly with my K3. The second one 
used to work, but now just blinks the LED slowly, about 1 sec. rate, 
when powered up.  If I switch the OP/DL switch to DL the LED turns off.  
I have no comms over the serial port with my computer.  I'm using the 
same setup as the one that works.


I tried to D/L new firmware, but it never finishes and the symptoms 
never change.   Is the PIC16F877 fried, or the serial interface chip 
(MAX1406)?


Any suggestions on what to try?

Thanks,

Gordon - N1MGO

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 after turning on doesn't receive or transmit

[Nr4c]

Yes!  It's a "computer". 

Sent from my iPhone
...nr4c. bill


> On Oct 13, 2017, at 4:00 PM, Dave Cole (NK7Z)  wrote:
> 
> Respectfully, is that really true?  The K3 needs to be shutdown via the Power 
> switch due to some sort of shutdown procedure, (or internal timings issue), 
> within the radio?
> 
> 73s and thanks,
> Dave
> NK7Z
> http://www.nk7z.net
> 
>> On 10/13/2017 11:52 AM, Bob McGraw K4TAX wrote:
>> I would also comment with Knut, AB2TC, that one must always turn the radio 
>> on and off with the power switch.  This allows the internal workings to 
>> store the data.   If you use a "master station switch" thus just dump the 
>> power supply then the radio may not store the data as required.   I recall 
>> the term "power down imminent" or PDI.
>> Years ago we had "the big switch" which was used to shut the station down.  
>> Today with all of the computerized gadgets, power down in sequence is more 
>> and more of a must do.
>> In another brand of radio to which I am familiar, there is a CPU timing 
>> circuit that assures the CPU is up and running before loading the operating 
>> code.   If this circuit is running too fast, it may cause a partial load and 
>> related error.  This circuit is basically a simple RC network, and with age 
>> the C value decreases thus making the timing circuit run too fast.   i.e.  
>> not enough delay.
>> 73
>> Bob, K4TAX
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to d...@nk7z.net
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Recent Thread on Powering Down K3

[Fred Jensen]

That is what the RRC-1258 at the K3 does.  When it's all set up, turning 
on the K3/0 [or
K3 or K3s] will turn on the remote radio.  When the K3/0 is turned off, 
the remote K3 shuts down completely.


73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 10/14/2017 5:54 AM, Don Wilhelm wrote:

Dick,

The K3 (note no hyphen in Elecraft model designations) can be powered 
off via the PS0 command.

To power it on, Pin 8 of the ACC connector can be pulled to ground.

73,
Don W3FPR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] 630 meter band approvals ...

[Edward R Cole]

Nothing received from UTC, but they have until Oct. 15th to reply to 
me after which implied approval can be assumed.


Wed. I repaired my 43H by 122L inverted-L and yesterday got it 
re-installed with help from my prof. tower folks, so now it requires 
retuning from 495 to 475 KHz and installing new synth board and mod 
kit for the filter in my K3.  Probably another week or two until I 
can start calling on 630m with 5w EIRP.


73, Ed - KL7UW
  http://www.kl7uw.com
Dubus-NA Business mail:
  dubus...@gmail.com 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] (k3) Key out redux

[Don Wilhelm]

Pete,

Connect one side of the relay coil to your +12 volt supply, and connect 
the other side to the KEYOUT jack.  Put a diode with the cathode 
connected to the +12 volt side across the relay coil.  The negative of 
your power supply has to connect to the shell of the KEYOUT connector.
The relay will be activated when the K3 KEYOUT is active - keying, TUNE 
and PTT will all activate it.


Yes, you should be able to use the same +12 volt supply to power the 
SDR's preamp and active antenna, but that is a different consideration 
than activating the relay.


73,
Don W3FPR

On 10/14/2017 10:18 AM, N4ZR wrote:
Thanks, everyone who responded to my earlier query - I now understand 
that the circuit in the K3 is equivalent to the old bipolar transistor 
switches we used to use for serial port CW/PTT keying.


So here's my problem - I have a small 12V DPDT relay that I want to use 
to switch the power to my SDR's preamp and active antenna - in other 
words, to cut them off when my K3 is in transmit.  What I can't figure 
out (be patient with a history major, please!) is how to use the Key Out 
jack to switch the power to the relay , while using the same 12V supply 
to power both the relay and the preamp/active antenna combo.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] (k3) Key out redux

[David Shoaf]

Here's  a link to the  basic discussion
  .  See the wiring
diagram about half way through the article.

Cheers,

David



--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] (k3) Key out redux

[N4ZR]

Thanks, everyone who responded to my earlier query - I now understand 
that the circuit in the K3 is equivalent to the old bipolar transistor 
switches we used to use for serial port CW/PTT keying.


So here's my problem - I have a small 12V DPDT relay that I want to use 
to switch the power to my SDR's preamp and active antenna - in other 
words, to cut them off when my K3 is in transmit.  What I can't figure 
out (be patient with a history major, please!) is how to use the Key Out 
jack to switch the power to the relay , while using the same 12V supply 
to power both the relay and the preamp/active antenna combo.


Ideally, the 12V relay would only be on when the K3's PTT was on.  The 
thing that's driving me nuts is that I had this working, once before, 
and then tore it apart for not very good reasons. Now I can't replicate 
what I had.


Would anyone be willing to go offline and help me figure this out?

--

73, Pete N4ZR
Check out the Reverse Beacon Network
at , now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Finding geographical coordinates

[Bill]

Very easy here: Lat & Long 
or you can use this: https://www.findlatitudeandlongitude.com/

Bill W2BLC*
*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Recent Thread on Powering Down K3

[Don Wilhelm]

Dick,

The K3 (note no hyphen in Elecraft model designations) can be powered 
off via the PS0 command.

To power it on, Pin 8 of the ACC connector can be pulled to ground.

73,
Don W3FPR

On 10/14/2017 7:24 AM, Richard C Bean wrote:


  If one has to turn the K-3 off only via the power switch, how does the K-3 
work when used with the K-3/0 remote head?  I have just purchased that and its 
accessories (RemoteRig boxes, etc.) but I have not yet set it up.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] 630 meter band approvals ...

[Charlie T]

Yep, got mine today too.

Now where did I store that 4CX10,000.?

Charlie k3ICH




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Recent Thread on Powering Down K-3

[Richard C Bean]

 If one has to turn the K-3 off only via the power switch, how does the K-3 
work when used with the K-3/0 remote head?  I have just purchased that and its 
accessories (RemoteRig boxes, etc.) but I have not yet set it up.  

Thanks and 73,


Dick, K1HC

 



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 after turning on doesn't receive or transmit

[Vic Rosenthal]

I suspect that “bad things” can happen if the power drops DURING the process of 
saving. Then you might get partial or invalid information stored. This could be 
why most of the time it is harmless.

Vic 4X6GP 

> On 14 Oct 2017, at 10:12, Clay Autery  wrote:
> 
> Just like any other computer with volatile memory  IF you don't tell the 
> computer you are shutting down, it doesn't know and therefore doesn't have 
> time to save the information to NON-volatile memory.
> 
> __
> Clay Autery, KY5G
> MONTAC Enterprises
> (318) 518-1389
> 
>> On 10/13/2017 3:00 PM, Dave Cole (NK7Z) wrote:
>> Respectfully, is that really true?  The K3 needs to be shutdown via the 
>> Power switch due to some sort of shutdown procedure, (or internal timings 
>> issue), within the radio?
>> 
>> 73s and thanks,
>> Dave
>> NK7Z
>> http://www.nk7z.net
>> 
>>> On 10/13/2017 11:52 AM, Bob McGraw K4TAX wrote:
>>> I would also comment with Knut, AB2TC, that one must always turn the radio 
>>> on and off with the power switch.  This allows the internal workings to 
>>> store the data. If you use a "master station switch" thus just dump the 
>>> power supply then the radio may not store the data as required.   I recall 
>>> the term "power down imminent" or PDI.
>>> 
>>> Years ago we had "the big switch" which was used to shut the station down.  
>>> Today with all of the computerized gadgets, power down in sequence is more 
>>> and more of a must do.
>>> 
>>> In another brand of radio to which I am familiar, there is a CPU timing 
>>> circuit that assures the CPU is up and running before loading the operating 
>>> code.   If this circuit is running too fast, it may cause a partial load 
>>> and related error.  This circuit is basically a simple RC network, and with 
>>> age the C value decreases thus making the timing circuit run too fast. i.e. 
>>>  not enough delay.
>>> 
>>> 73
>>> 
>>> Bob, K4TAX
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2vco@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KIO3B Audio I/O PCB Assembly

[Clay Autery]

Anyone have a slick way of securing the KIO3B Audio I/O PCB
Assembly when installed so it doesn't wiggle up and down every time you 
make/break a connection.


Drives me nuts and can't be good for longevity on the multi-pin connector.

73,

--
__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 after turning on doesn't receive or transmit

[Clay Autery]

Just like any other computer with volatile memory  IF you don't tell 
the computer you are shutting down, it doesn't know and therefore 
doesn't have time to save the information to NON-volatile memory.


__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 10/13/2017 3:00 PM, Dave Cole (NK7Z) wrote:
Respectfully, is that really true?  The K3 needs to be shutdown via 
the Power switch due to some sort of shutdown procedure, (or internal 
timings issue), within the radio?


73s and thanks,
Dave
NK7Z
http://www.nk7z.net

On 10/13/2017 11:52 AM, Bob McGraw K4TAX wrote:
I would also comment with Knut, AB2TC, that one must always turn the 
radio on and off with the power switch.  This allows the internal 
workings to store the data. If you use a "master station switch" thus 
just dump the power supply then the radio may not store the data as 
required.   I recall the term "power down imminent" or PDI.


Years ago we had "the big switch" which was used to shut the station 
down.  Today with all of the computerized gadgets, power down in 
sequence is more and more of a must do.


In another brand of radio to which I am familiar, there is a CPU 
timing circuit that assures the CPU is up and running before loading 
the operating code.   If this circuit is running too fast, it may 
cause a partial load and related error.  This circuit is basically a 
simple RC network, and with age the C value decreases thus making the 
timing circuit run too fast. i.e.  not enough delay.


73

Bob, K4TAX




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] 630 meter band approvals ...

[Clay Autery]

Me too approved for both bands!  Now to figure out how to get on 
them.  ;)


__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 10/13/2017 2:10 PM, Joe Subich, W4TV wrote:


Looks like approvals are starting to come out for 630 m operation.  I
filled out the on-line form the first day (even though I have in amp
or antenna) and received an approval e-mail today.

73,

   ... Joe, W4TV

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Key Out jack

[Clay Autery]

K3 Schematics: http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf
K3S Schematics: 
http://www.elecraft.com/manual/E740323%20K3s%20Schematic%20Files.pdf


__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 10/13/2017 8:33 AM, N4ZR wrote:
I am trying to use the Key Out jack on my K3 to key a small relay to 
protect my SDR from RF.  The 12V@40 ma is well within the stated 
rating of the jack, but to my surprise it does not work. Measuring 
with an analog multimeter, the jack appears to be shorted all the 
time, and also to have a very small DC voltage on it.  I don't have a 
schematic for the radio, so I'm stumped.  Is this a function of the 
way I'm measuring, or...?


--

73, Pete N4ZR
Check out the Reverse Beacon Network
at , now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com