[Elecraft] K3S Scan Delay
How I can set the scan delay when a signal is found? I would like a longer delay time on the scan function when a signal is detected. Thanks 73 de KP4FMD - K3s #10,554 -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] |KX2 Deaf on 7.0
Tony, Elecraft have a service agent - Carlo Bianconi - in Italy who does great work. Shipping was very reasonable. Several of the 6Gs DXpedition team sent KPA500s over to him for a hardware upgrade and full checkout before our first trip (TX6G). I'd chat with Elecraft support first, but if they suggest sending the unit to Carlo, from our experience it will be in good hands. 73 David G3WGN M6O WJ6O -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 tip to help remove AA batteries
Shucks, our $1000 wireless professional microphones use the ribbon technique to assist in removing the battery/batteries. Works great until some apprentice audio tech forgets to put the ribbon UNDER the new battery and then says "hey, what's this hanging out of the case?" 73 Bob, K4TAX On 12/26/2017 2:46 PM, Mark via Elecraft wrote: Excellent tip, Mike! It brought back memories of my kid's toys that had a small ribbon behind the cells that you could pull and the cells would come out easily. So, I just looked at the toys all of my grandchildren got for Christmas, and NONE of them had that feature. Looks like I will use your tip on a lot more than my KX3! Mark KE6BB null __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to rmcg...@blomand.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 tip to help remove AA batteries
Excellent tip, Mike! It brought back memories of my kid's toys that had a small ribbon behind the cells that you could pull and the cells would come out easily. So, I just looked at the toys all of my grandchildren got for Christmas, and NONE of them had that feature. Looks like I will use your tip on a lot more than my KX3! Mark KE6BB null __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 tip to help remove AA batteries
I believe the batteries are really tight in the battery holder to provide a low resistance contact. I remember a post from Elecraft mentioning that they had to use a special battery holder to get that resistance down. I used to see ribbon under batteries to help pop them out of a holder. I’m pretty sure my 1960’s Sony transistor radio had those. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Dec 26, 2017, at 12:03 PM, Mike Parkes wrote: > > I have only used Eneloop AA batteries on my kx3, so not sure if its just > them, but getting them out of the battery holder (on each end end) is > difficult. > > So I cut a strip of coated paper from a catalog, and wrapped that around > the end of battery on the + end and now I can pull them out easily. > Here are some pix to illustrate. > > https://drive.google.com/file/d/1CGpkMwu-oQW0ufhyZYzKagGH3-IVXAG5/view?usp=drivesdk > > https://drive.google.com/file/d/1la62eVeYbAwOv6f2CUO90EkH1B3Xv9_W/view?usp=drivesdk > > (I do have the internal charger but waiting on a 13.8v PS. ) > > Happy new year to all on this list! > Mike AB7RU > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wun...@wunderwood.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [OT] Heil ProSet K2 with Kenwood TH-D72a HT?
Thanks Don - nope, no volts! I’ll be looking for other options. Can’t have too many headsets ;-) Bret/N4SRN -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 tip to help remove AA batteries
I have only used Eneloop AA batteries on my kx3, so not sure if its just them, but getting them out of the battery holder (on each end end) is difficult. So I cut a strip of coated paper from a catalog, and wrapped that around the end of battery on the + end and now I can pull them out easily. Here are some pix to illustrate. https://drive.google.com/file/d/1CGpkMwu-oQW0ufhyZYzKagGH3-IVXAG5/view?usp=drivesdk https://drive.google.com/file/d/1la62eVeYbAwOv6f2CUO90EkH1B3Xv9_W/view?usp=drivesdk (I do have the internal charger but waiting on a 13.8v PS. ) Happy new year to all on this list! Mike AB7RU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] |KX2 Deaf on 7.0
Yes, by all means Tony should contact Elecraft service. They are staffed with very competent people, and have developed methods of supporting customers around the world. Several years ago, I experienced excellent support from SDR Kits, a small UK company that builds the excellent VNWA Vector Network Analyzer designed by EE prof DG8SAQ. I fried the front end by absent-mindedly transmitting into one antenna while the VNWA was still connected to another one. They sent me enough of the schematic and parts layout around that stage that I was able to purchase the needed SMT parts and get a younger local ham with SMT experience and a good microscope setup on his bench to install them. The parts I needed were inexpensive and easy to buy from the usual industrial electronics suppliers (like Farnell in the UK). There's a good chance that Elecraft could do something similar. Perhaps Tony might start with a good photo of the board and the part that fell out, and send that via email. 73, Jim K9YC On 12/26/2017 9:33 AM, K9MA wrote: Hi Tony, Sounds like a smoking gun to me. Certainly there must be someone on that side of the Atlantic that could replace an SMT part! I'm sure Elecraft would provide guidance. 73, Scott K9MA On 12/26/2017 06:58, Tony G6GLP wrote: Hi Scott I had a look inside and under the atu but nothing looks out of place until a little smt device dropped out. It looks like a coil of some sort but I am not sure where it fell off and even if I did I now dont have the facilities to put is back with any dignity. So when the elves get back to work I will get an RMA number and box it up and send it off for them to remedy. Since its second hand it wont hurt for a once over. 73 de Tony G6GLP On 25/12/2017 22:55, K9MA wrote: It might be worth taking a look at the bandpass filters, just to see if there's a broken inductor wire, or something else simple. I've always been suspicious of those toroids supported only by their leads. You could also just do some continuity tests, to make sure the relays are OK. Unfortunately, the filters are on the main circuit board. If you can't fix it yourself, you'll have to send the whole radio to Elecraft. --- This email has been checked for viruses by AVG. http://www.avg.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@sdellington.us __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 configuration or control software?
Wizkers:Radio can do an SWR scan with a K3, KX3, or KX2. It also works with some other rigs. Very handy bit of free, portable software. http://www.wizkers.io/wizkersradio wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Dec 25, 2017, at 8:09 PM, Jim N7US wrote: > > Eric, > > I believe you're thinking about K3_EZ, which was written by W2BC, who is now > a SK. I just uploaded three versions to the Files folder in the Elecraft_K3 > Yahoo Group. I think the last version had a bug in the TX audio settings, > but I'm not sure. > > https://groups.yahoo.com/neo/groups/Elecraft_K3/files/K3_EZ/ > > The Zip files are each about 7MB. > > 73, Jim N7US > > -Original Message- > > Back when I last owned a K3 (2009?), I had a piece of software that would, > among other things plot the SWR of the antenna attached to the radio. > > Now that I've picked up K3, I'd love to find the software in question. It's > not the current Elecraft K3 configuration program, the Win4K3Suite, or > N4PY's software packages. > > Is anyone familiar with the software I'm thinking about? > > > > Thanks, > > Eric W3DQ > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wun...@wunderwood.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3s IF bandwidth?
It's as wide as the bandwidth of the BPF ahead of the 1st mixer. There are several BPF's for the various bands and their BW no doubt varies, but is likely much larger than 200 KHz. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 12/25/2017 9:17 AM, Jim Miller wrote: The P3 displays a maximum of 200khz. Is that the maximum useful K3 IF bandwidth or is it wider? 73 Jim ab3cv __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k6...@foothill.net -- This message has been scanned by E.F.A. Project and is believed to be clean. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] |KX2 Deaf on 7.0
Hi Tony, Sounds like a smoking gun to me. Certainly there must be someone on that side of the Atlantic that could replace an SMT part! I'm sure Elecraft would provide guidance. 73, Scott K9MA On 12/26/2017 06:58, Tony G6GLP wrote: Hi Scott I had a look inside and under the atu but nothing looks out of place until a little smt device dropped out. It looks like a coil of some sort but I am not sure where it fell off and even if I did I now dont have the facilities to put is back with any dignity. So when the elves get back to work I will get an RMA number and box it up and send it off for them to remedy. Since its second hand it wont hurt for a once over. 73 de Tony G6GLP On 25/12/2017 22:55, K9MA wrote: It might be worth taking a look at the bandpass filters, just to see if there's a broken inductor wire, or something else simple. I've always been suspicious of those toroids supported only by their leads. You could also just do some continuity tests, to make sure the relays are OK. Unfortunately, the filters are on the main circuit board. If you can't fix it yourself, you'll have to send the whole radio to Elecraft. --- This email has been checked for viruses by AVG. http://www.avg.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@sdellington.us -- Scott K9MA k...@sdellington.us __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 configuration or control software?
I did download and install V2.008.Zip. Scanned a couple of my antennas. Seems to work OK as expected with my K3S. Jim - Thanks for uploading the files and posting same. 73 Bob, K4TAX On 12/25/2017 10:09 PM, Jim N7US wrote: Eric, I believe you're thinking about K3_EZ, which was written by W2BC, who is now a SK. I just uploaded three versions to the Files folder in the Elecraft_K3 Yahoo Group. I think the last version had a bug in the TX audio settings, but I'm not sure. https://groups.yahoo.com/neo/groups/Elecraft_K3/files/K3_EZ/ The Zip files are each about 7MB. 73, Jim N7US -Original Message- Back when I last owned a K3 (2009?), I had a piece of software that would, among other things plot the SWR of the antenna attached to the radio. Now that I've picked up K3, I'd love to find the software in question. It's not the current Elecraft K3 configuration program, the Win4K3Suite, or N4PY's software packages. Is anyone familiar with the software I'm thinking about? Thanks, Eric W3DQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to rmcg...@blomand.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] |KX2 Deaf on 7.0
Hi Scott I had a look inside and under the atu but nothing looks out of place until a little smt device dropped out. It looks like a coil of some sort but I am not sure where it fell off and even if I did I now dont have the facilities to put is back with any dignity. So when the elves get back to work I will get an RMA number and box it up and send it off for them to remedy. Since its second hand it wont hurt for a once over. 73 de Tony G6GLP On 25/12/2017 22:55, K9MA wrote: It might be worth taking a look at the bandpass filters, just to see if there's a broken inductor wire, or something else simple. I've always been suspicious of those toroids supported only by their leads. You could also just do some continuity tests, to make sure the relays are OK. Unfortunately, the filters are on the main circuit board. If you can't fix it yourself, you'll have to send the whole radio to Elecraft. --- This email has been checked for viruses by AVG. http://www.avg.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com