[Elecraft] K3S macro
Is there a K3S macro to set the radio to USB? I know about BR0; BR1; BR2; and BR3; Ed W0SD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Selectivity
I noticed that during the contest, that if I selected 50 or 100 Hz selectivity, the audio would drop way down. It didn't used to be this way. I tried reloading an earlier version of the software but couldn't figure out how to do it. Hope this comes through, finally! 73, Roger __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX2 SOLD
Thanks for so much interest.It has been sold. George wb5xx __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: KX2-F Loaded
KX2-F just like new,never used outside my home.Loaded with all accessories Elecraft sells for the KX2 plus end covers and front cover made by Gem Products.Price is $875 shipped Fedex.Email me for further information. Thanks George wb5xx __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Security cable attachment for radios
The vast majority of laptop computers come with a little 2mmx7mm slot in the case to allow the attachment of a security cable to discourage them from growing legs when left unattended for a few minutes... Is there a spot on the case of a K3s where such a milled slot could be added? It would be a help when using one in a public place like Field Day, etc. Jim W6US __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] kxser cable infos
Hello I am wiring my own KXSER Rs232 cable ...DB9F TO 3.5 MM JACK Here is what I have for connections. DB9F 3.5MM JACK pin 3Tip pin 2Ring pin 5Sleeve. I saw somewhere that pins 4 (DTR) AND PIN 8 CTS) on the DB9F must be connected together I AM NOT SURE... Anyone can tell me if those pins 4 and 8 must be together(CONNECTED) Thanks Noel __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Wrong PIM nuts in KPA500 kit
You can install PEM nuts with a hammer and anvil but it's best to do it with a PEM insertion machine or a fixture in a press. 4-40 nuts typically require a .166 diameter hole and 6-32 require a .188 hole. John KK9A Michael Blake K9JRI wrote: I am waiting on a response from Elecraft TS on this one but I thought I would ask if anyone else has encountered this problem on the KPA500 kit. On the bottom edge of both the right and left side panels there are places for three 6-32 flat head screws. The countersunk holes are obviously larger than those for the other 4-40 flat head screws. In my kit one of the three PIM nuts, for each side, was the correct 6-32 thread PIM nut and the remaining two had 4-40 PIM nuts installed in the bottom cover. When I had temporarily installed the left hand side panel in the middle of construction I failed to notice this and just installed screws that fit (one 6-32 and two 4-40) but during final assembly it became obvious that the 6-32 screws would not fit in 4 of the 6 positions. Thinking that they just had paint in them I tried tp run a 6-32 tap through one and it naturally seized up and twisted the PIM nut out. Not being the brightest bulb in the shop I tried that a second time and twisted out the second PIM nut. Fortunately these were both on the right hand side where there was room to slip two 6-32 hex nuts in place and I just used two 4-40 flat head screws on the left side. Hopefully Elecraft will be able to send me the correct PIM nuts to replace the four incorrect ones. That was my request in the email to Doug at tech support. I certainly would not want to replace the bottom coverl as that would require a complete disassembly of the amplifier. Has anyone else encountered this? Michael Blake __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KXSER CABLE INFO
Hello I am wiring my own KXSER Rs232 cable ...DB9F TO 3.5 MM JACK Here is what I have for connections. DB9F 3.5MM JACK pin 3Tip pin 2Ring pin 5Sleeve. I saw somewhere that pins 4 (DTR) AND PIN 8 CTS) on the DB9F must be connected together I AM NOT SURE... Anyone can tell me if those pins 4 and 8 must be together(CONNECTED) Thanks Noel __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com