Re: [Elecraft] Migrating a KPA3 POWER module to a K3S
The “A” has at least 2 advantages over the old one. First it has a true “Bypass” relay to actually bypass the amp when its not being used. But most important, it has more pins in the connector supplying power to the amp which seem to be more reliable and I don’t see the dreaded voltage related errors of my older K3. Buy the new one. Sent from my iPhone ...nr4c. bill > On Mar 30, 2018, at 12:53 AM, Jeff wrote: > > I know Elecraft does not recommend bringing in a KPA3 from a K3 to a new K3S, > but has anyone done this and how does the rig perform? > > Sent from my iPad > > Sent from my iPad > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] (K2) CW key
I am searching for a small CW key that will attach to the K2 bail. I think Elecraft has/does sell such an item. If not, directions to any other source for such an item would be appreciated. Thanks. ...robert -- Robert G Strickland, PhD ABPH - KE2WY rc...@verizon.net.usa Syracuse, New York, USA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: K2/10 with most options
K2/10 for sale, works great and front panel and case in perfect condition, includes: KSB2 SSB option for voice and data modes KDSP DSP filter KAT2 Internal tuner KNB2 Noise blanker KIO2, Serial I/O board L160RX, 160M Rx/Tx and ext Rx antenna K6XX Zero Beat indicator, installed hand mic (non Elecraft) With free shipping to lower 48. $750, photos available S/N 32XX Steve KB3Sii Respond off list, please __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Re K3 Audio
Does any one know the command for both Mike in Front Panel and Line in rear panel? I need both at the same time, Mike for voice and Line in for digital. Ralph, W7HSG/AFA9RT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] (K2) CW key
good evening robert, I have this model is very practical in mobile and it's magnetic http://www.palm-radio.de/english/english.html 73 , Christophe F8ACF-56 Le vendredi 30 mars 2018 à 15:33:33 UTC+2, Robert G Strickland a écrit : I am searching for a small CW key that will attach to the K2 bail. I think Elecraft has/does sell such an item. If not, directions to any other source for such an item would be appreciated. Thanks. ...robert -- Robert G Strickland, PhD ABPH - KE2WY rc...@verizon.net.usa Syracuse, New York, USA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to f8ac...@yahoo.fr __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Re K3 Audio
LIN IN and LIN OUT are both on the rear panel. No use mic for this. Sent from my iPhone ...nr4c. bill > On Mar 30, 2018, at 2:09 PM, Ralph S. Turk wrote: > > Does any one know the command for both Mike in Front Panel and Line in rear > panel? > > I need both at the same time, Mike for voice and Line in for digital. > > > Ralph, W7HSG/AFA9RT > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Re K3 Audio
Look at the latest K3/K3S manual on the Elecraft website, page 55. The menu settings you need are “MIC SEL” and “MIC+LIN”. They interact with each other. > >> On Mar 30, 2018, at 2:09 PM, Ralph S. Turk wrote: >> >> Does any one know the command for both Mike in Front Panel and Line in rear >> panel? >> >> I need both at the same time, Mike for voice and Line in for digital. >> >> >> Ralph, W7HSG/AFA9RT >> __ Grant NQ5T K3 #2091, KX3 #8342 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Re K3 Audio
> I need both at the same time, Mike for voice and Line in for digital. This is absolutely a terrible idea. I doubt that your shack is silent while working data modes and any noise - you talking, someone else yelling at your, a TV/radio/computer running in the background, or even fan noise will be picked up by the open mic. That said ... Does any one know the command for both Mike in Front Panel and Line in rear panel? Assuming you will be using USB *with CMP set to zero*, set MENU:MIC SEL as needed for your mic and MENU:MIC+LIN = ON. Note: you will first need to set MENU:MIC SEL=LINE and adjust the mic gain/sound card output for four to five bars of ALC. This sets the Line IN gain. Then switch to MENU:MIC SEL as needed for your mic (FP.h or FP.L) and again adjust the mic gain for ALC peaking between 5 to 7 bars. Now you can select MENU:MIC+LINE and set it to ON to enable both inputs. Adjusting the mic gain with MENU:MIC+LINE = ON will adjust *ONLY* the mic gain for the *MICROPHONE* input, in order to change the Line In (digital) level, you will need to adjust the sound card output *or* change MENU:MIC SEL to LINE before adjusting the mic gain. 73, ... Joe, W4TV On 3/30/2018 2:09 PM, Ralph S. Turk wrote: Does any one know the command for both Mike in Front Panel and Line in rear panel? I need both at the same time, Mike for voice and Line in for digital. Ralph, W7HSG/AFA9RT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to li...@subich.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
