Re: [Elecraft] K3 - Do I need K144XV Reference Lock Board?
Hello, You definitely need the Referenzlock board, even for microwave or eme. Regards Harald DD0VS .-.-. --... ...-- -.. -.. - ...- ... > Am 26.07.2019 um 22:19 schrieb Alex Malyava : > > Hi, > I am upgrading my 4-yeas old K3 (not K3S) with 2M option, got the K144XV > already. > The radio will be used for 2M EME... > Do I need to install that Reference Lock Board? > I am afraid so :) > > Description on Elecraft website is fuzzy, something like "If you do FM only > - you dont need, it... use it for CW SSB". > > What will it give me in absolute numbers, like PPM or Hz? > How bat it is without the board? > > Thanks, > Alex K2BB > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to dd...@gmx.de __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Sudden K3 failure
Jack Did check that - nope not the problem Thanks Regards, Mark, K1RX > On Jul 26, 2019, at 10:54 PM, Jack Brindle wrote: > > Perhaps the RxAnt is selected? Easy to do, easy to miss. Done it more times > than I care to remember. > > 73! > Jack, W6FB > > >> On Jul 26, 2019, at 7:42 PM, Mpridesti via Elecraft >> wrote: >> >> Sorry- did not fully see the problem >> >> The receiver is not working on any band not just 40. Sounds like band noise >> on all bands (sounds the same on every band). Did a comparison with a >> second K3 to confirm the no receiver problem on all bands. >> >> Previously found by rotating some of the tmp connectors on the SYN boards, >> got the TX problem to go away. So this “no receive” seems unrelated. >> >> Regards, >> >> Mark, K1RX >> >> >>> On Jul 26, 2019, at 9:57 PM, Barry Simpson wrote: >>> >>> What about RX antenna ? >>> >>> Barry VK2BJ >>> On Sat, 27 Jul 2019 at 09:54, Mpridesti via Elecraft wrote: Confirmed that at an early stage of the trouble shooting. No difference with either antenna selected (only one port has an antenna). Regards, Mark, K1RX > On Jul 26, 2019, at 7:28 PM, Dennis Moore wrote: > > Any chance you accidentally switched antennas on 40m? > > Dennis NJ6G > >> On 7/26/2019 13:21, Mpridesti via Elecraft wrote: >> Although I was able get the TX running again by merely doing a small >> twist to all the TMP connectors that were reachable with top cover >> removed and behind the front panel, unable to bring back the receiver >> front end on 40 m. I hear noise and very weak signals but nothing like >> the normal band noise and a hot receiver previously. >> >> Now wondering if another part of the radio (tmp connectors) needs a >> small twist to break up oxidation. Not clear as to why just one band is >> affected. Any thoughts from this great resource? >> >> Regards, >> >> Mark, K1RX > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to mpride...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to vk...@optusnet.com.au >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to jackbrin...@me.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Sudden K3 failure
Perhaps the RxAnt is selected? Easy to do, easy to miss. Done it more times than I care to remember. 73! Jack, W6FB > On Jul 26, 2019, at 7:42 PM, Mpridesti via Elecraft > wrote: > > Sorry- did not fully see the problem > > The receiver is not working on any band not just 40. Sounds like band noise > on all bands (sounds the same on every band). Did a comparison with a second > K3 to confirm the no receiver problem on all bands. > > Previously found by rotating some of the tmp connectors on the SYN boards, > got the TX problem to go away. So this “no receive” seems unrelated. > > Regards, > > Mark, K1RX > > >> On Jul 26, 2019, at 9:57 PM, Barry Simpson wrote: >> >> What about RX antenna ? >> >> Barry VK2BJ >> >>> On Sat, 27 Jul 2019 at 09:54, Mpridesti via Elecraft >>> wrote: >>> Confirmed that at an early stage of the trouble shooting. No difference >>> with either antenna selected (only one port has an antenna). >>> >>> Regards, >>> >>> Mark, K1RX >>> >>> On Jul 26, 2019, at 7:28 PM, Dennis Moore wrote: Any chance you accidentally switched antennas on 40m? Dennis NJ6G > On 7/26/2019 13:21, Mpridesti via Elecraft wrote: > Although I was able get the TX running again by merely doing a small > twist to all the TMP connectors that were reachable with top cover > removed and behind the front panel, unable to bring back the receiver > front end on 40 m. I hear noise and very weak signals but nothing like > the normal band noise and a hot receiver previously. > > Now wondering if another part of the radio (tmp connectors) needs a small > twist to break up oxidation. Not clear as to why just one band is > affected. Any thoughts from this great resource? > > Regards, > > Mark, K1RX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to mpride...@yahoo.com >>> >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to vk...@optusnet.com.au > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jackbrin...@me.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Sudden K3 failure
Sorry- did not fully see the problem The receiver is not working on any band not just 40. Sounds like band noise on all bands (sounds the same on every band). Did a comparison with a second K3 to confirm the no receiver problem on all bands. Previously found by rotating some of the tmp connectors on the SYN boards, got the TX problem to go away. So this “no receive” seems unrelated. Regards, Mark, K1RX > On Jul 26, 2019, at 9:57 PM, Barry Simpson wrote: > > What about RX antenna ? > > Barry VK2BJ > >> On Sat, 27 Jul 2019 at 09:54, Mpridesti via Elecraft >> wrote: >> Confirmed that at an early stage of the trouble shooting. No difference >> with either antenna selected (only one port has an antenna). >> >> Regards, >> >> Mark, K1RX >> >> >> > On Jul 26, 2019, at 7:28 PM, Dennis Moore wrote: >> > >> > Any chance you accidentally switched antennas on 40m? >> > >> > Dennis NJ6G >> > >> >> On 7/26/2019 13:21, Mpridesti via Elecraft wrote: >> >> Although I was able get the TX running again by merely doing a small >> >> twist to all the TMP connectors that were reachable with top cover >> >> removed and behind the front panel, unable to bring back the receiver >> >> front end on 40 m. I hear noise and very weak signals but nothing like >> >> the normal band noise and a hot receiver previously. >> >> >> >> Now wondering if another part of the radio (tmp connectors) needs a small >> >> twist to break up oxidation. Not clear as to why just one band is >> >> affected. Any thoughts from this great resource? >> >> >> >> Regards, >> >> >> >> Mark, K1RX >> > __ >> > Elecraft mailing list >> > Home: http://mailman.qth.net/mailman/listinfo/elecraft >> > Help: http://mailman.qth.net/mmfaq.htm >> > Post: mailto:Elecraft@mailman.qth.net >> > >> > This list hosted by: http://www.qsl.net >> > Please help support this email list: http://www.qsl.net/donate.html >> > Message delivered to mpride...@yahoo.com >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to vk...@optusnet.com.au __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Sudden K3 failure
Confirmed that at an early stage of the trouble shooting. No difference with either antenna selected (only one port has an antenna). Regards, Mark, K1RX > On Jul 26, 2019, at 7:28 PM, Dennis Moore wrote: > > Any chance you accidentally switched antennas on 40m? > > Dennis NJ6G > >> On 7/26/2019 13:21, Mpridesti via Elecraft wrote: >> Although I was able get the TX running again by merely doing a small twist >> to all the TMP connectors that were reachable with top cover removed and >> behind the front panel, unable to bring back the receiver front end on 40 m. >> I hear noise and very weak signals but nothing like the normal band noise >> and a hot receiver previously. >> >> Now wondering if another part of the radio (tmp connectors) needs a small >> twist to break up oxidation. Not clear as to why just one band is affected. >> Any thoughts from this great resource? >> >> Regards, >> >> Mark, K1RX > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to mpride...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Sudden K3 failure
Any chance you accidentally switched antennas on 40m? Dennis NJ6G On 7/26/2019 13:21, Mpridesti via Elecraft wrote: Although I was able get the TX running again by merely doing a small twist to all the TMP connectors that were reachable with top cover removed and behind the front panel, unable to bring back the receiver front end on 40 m. I hear noise and very weak signals but nothing like the normal band noise and a hot receiver previously. Now wondering if another part of the radio (tmp connectors) needs a small twist to break up oxidation. Not clear as to why just one band is affected. Any thoughts from this great resource? Regards, Mark, K1RX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Sudden K3 failure
Although I was able get the TX running again by merely doing a small twist to all the TMP connectors that were reachable with top cover removed and behind the front panel, unable to bring back the receiver front end on 40 m. I hear noise and very weak signals but nothing like the normal band noise and a hot receiver previously. Now wondering if another part of the radio (tmp connectors) needs a small twist to break up oxidation. Not clear as to why just one band is affected. Any thoughts from this great resource? Regards, Mark, K1RX > On Jul 25, 2019, at 10:30 AM, Mpridesti via Elecraft > wrote: > > Interesting > > Powered up radio again and worked fine again. Within minutes failed again so > I am suspecting the tmp connectors as suggested by K1XX (and others) and the > SYM area. > > Regards, > > Mark, K1RX > > >> On Jul 25, 2019, at 9:40 AM, Mpridesti via Elecraft >> wrote: >> >> Appreciate all the suggestions >> >> Will address later today and will advise >> >> Regards, >> >> Mark, K1RX >> >> >>> On Jul 25, 2019, at 8:24 AM, Mpridesti via Elecraft >>> wrote: >>> >>> Yesterday while just listening to a SSB QSO, the receiver just went quiet >>> and when I tried to transmit, got nothing. >>> >>> Power setting was at 75 watts and varied properly but meter and external >>> output monitor was showing nothing. >>> >>> Thought the filters stopped passing RF. >>> >>> Rechecked the filter settings on the Utility program and all seemed normal >>> (no change). >>> >>> What could cause the radio to behave like this? During receive? >>> >>> Regards, >>> >>> Mark, K1RX >>> >>> >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to mpride...@yahoo.com >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to mpride...@yahoo.com > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to mpride...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 - Do I need K144XV Reference Lock Board?
Hi, I am upgrading my 4-yeas old K3 (not K3S) with 2M option, got the K144XV already. The radio will be used for 2M EME... Do I need to install that Reference Lock Board? I am afraid so :) Description on Elecraft website is fuzzy, something like "If you do FM only - you dont need, it... use it for CW SSB". What will it give me in absolute numbers, like PPM or Hz? How bat it is without the board? Thanks, Alex K2BB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K2] Very Low SSB on 20 Meters
Thanks, I'll do that. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K2] Very Low SSB on 20 Meters
Check everything in CW transmit first, including the VFO frequencies at the band edges. Then check your SSB filter alignment (and CW too) with Spectrogram to make certain the filter passbands are aligned correctly. The FL1 filter for both USB and LSB must be set to OP1. Set things properly in receive and then check transmit. 73, Don W3FPR On 7/26/2019 12:39 PM, James Doty wrote: Oh, okay. I honestly don't know what to look for though. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K2] Very Low SSB on 20 Meters
Oh, okay. I honestly don't know what to look for though. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K2] Very Low SSB on 20 Meters
James, As I indicated, with the K2, the LSB used on 17 meters and below is the same sideband as used for USB on 15 meters and above. Since the 6 meter transceiver uses a 28 MHz IF (assuming it is an Elecraft XV50), then the USB transmission will be the same as the LSB transmission on the lower bands. In other words, you need to look for a problem different than a LSB/USB problem. 73, Don W3FPR On 7/26/2019 12:20 PM, James Doty wrote: It's a K2 with a 6 meter transverter. I'll try your suggestion after work. Thanks. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K2] Very Low SSB on 20 Meters
It's a K2 with a 6 meter transverter. I'll try your suggestion after work. Thanks. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K2] Very Low SSB on 20 Meters
James, Is this a K2 or a K3? In the K2, the sidebands are reversed on 15 meters and above, and there is no 6 meters in the K2. What I am saying is that if LSB works on the lower bands, then USB should work on 15 meters and above - if this is a K2. If it is a K3, then ignore my responses. If A K2, then try 17 meters USB. 73, Don W3FPR On 7/26/2019 11:19 AM, James Doty wrote: It appears that USB is bad across the bands. I tried USB on 6, 10, 15, and 20 meters. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K2] Very Low SSB on 20 Meters
It appears that USB is bad across the bands. I tried USB on 6, 10, 15, and 20 meters. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] A new release of Win4K3Suite is now available
Hello, There is a new version of Win4K3Suite available, version 2.006. If you use N1MM and the Spectrum broadcast from Win4K3Suite this release fixes an issue with this configuration. Win4K3Suite is a full featured control program for the K3/S, KX3 and KX2. It has a built in Panadapter that works with LPPAN and a sound card, as well as the SDRPlay RSP's. It supports the KAT500, KPA500/1500 and the KXPA100 on most of the above radios. A unique feature is that is has 6 built in Virtual Radios, each of which works just like an Elecraft radio. This allows sharing of a single COM port with up to 6 applications. It also has a built in HRDLogbook server and the EiBi Shortwave database which is now up to date. You see more information here: https://www.youtube.com/results?search_query=win4k3suite and download a fully functional 30 day trial at va2fsq.com 73 Tom va2fsq.com --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 Yahoo User group
Bryan, Interesting. I just received my first digest from the group in a LONG time; I thought the group died. But I got in without need for an ATT account. Bob Krug KA2TQV On Thursday, July 25, 2019, 6:41 PM, Bryan Brauer wrote: I just tried to sign on to the Yahoo KX3 user group after not having done so for some time. It is requesting an AT&T account. Is this something new? I don't want an AT&T account. AI6B *Bryan B. Brauer, PE* *Consulting Engineer* br...@bbbrauer.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to krug...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] AF Limit?
I would second that. Mark, WB9CIF -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Vic Rosenthal Sent: Friday, July 26, 2019 05:21 To: Wayne Burdick Cc: Elecraft Subject: Re: [Elecraft] AF Limit? I would like it. I use minimal AGC and it would be ear protection. Victor 4X6GP > On 26 Jul 2019, at 3:29, Wayne Burdick wrote: > > At present the AF limiter only applies when AGC is off. We could add a > separate AGC-on limiter setting if needed. > > Wayne > N6KR > > > elecraft.com > >> On Jul 25, 2019, at 6:41 PM, Rich wrote: >> >> Does the AF Limit always keep the audio level at the given setting or just >> when the AGC is OFF? >> >> Rich >> K3RWN >> __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmus...@outlook.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S HDSDR as a panadapter with IF out
Hi Gernot this does not work, the Perseus has an ExtIO.dll for HDSDR so for an input I selected Perseus HF Receiver. However you set me along the right path. Input mode for RX is I left Q right. RF Front end calibration SDR on IFD output controlled by Omni-Rig (2 in my case) Full sync in both directions. IF frequency 8215000 Hz Global offset in my case is -2435 Hz but I have not yet calibrated the K3S as I will be locking to 10 MHz as soon as the hardware arrives. I have also found it best to only Sync to omnirig and not from omnirig to allow VFO fine tuning without Omnirig and the K3 VFO fighting with each other. That's it and it seems to work well but I may change a few things, I have the Perseus set to 500 kS/S so I can see 450kHz of band, I am not sure what the BW of the IF output is but it looks flat. 73 Conrad PA5Y __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
