Re: [Elecraft] K3/P3/Microkeyer hookup
I do not own a Microkeyer but I do have several DigiKeyer II's that I use for FSK and CW. My MicroHam cables are clearly marked where to plug them into a K3/K3S. I move my transceivers around a number of times a year, the markings have made setup quite easy. If you do not have MicroHam cables, making and labeling your homebrew cables as shown in this schematic should help: https://www.microham.com/Downloads/DB37-EL-K3.pdf . The Elecraft manual will show how to add a P3 to the mix. John KK9A Randy Lake N1KNF wrote: I have looked at app notes and past listings and cannot for the life of me get my stuff hooked back up correctly. A bit of guidance would be appreciated. Thank you -- Randy Lake N1KWF 73 Gunn Rd. Keene,NH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3/P3/Microkeyer DB9 connections
On 2020-01-22 6:25 AM, Randy Lake wrote: > I will add that I only need the DB9 hookup. Microham RS232 to P3 (PC)? > Then P3 (TXVR) to K3 RS232 ? Yes. 73, ... Joe, W4TV On 2020-01-22 6:25 AM, Randy Lake wrote: I will add that I only need the DB9 hookup. Microham RS232 to P3 (PC)? Then P3 (TXVR) to K3 RS232 ? I have looked at app notes and past listings and cannot for the life of me get my stuff hooked back up correctly. A bit of guidance would be appreciated. Thank you __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3/P3/Microkeyer DB9 connections
I will add that I only need the DB9 hookup. Microham RS232 to P3 (PC)? Then P3 (TXVR) to K3 RS232 ? I have looked at app notes and past listings and cannot for the life of me get my stuff hooked back up correctly. A bit of guidance would be appreciated. Thank you -- Randy Lake N1KWF 73 Gunn Rd. Keene,NH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Update: K3 Hard of Hearing
I think that time was several days ago! Sent from my iPhone ...nr4c. bill > On Jan 22, 2020, at 1:36 AM, Jack Brindle via Elecraft > wrote: > > John; > > It sounds like it is time to call tech support to see if they can help. They > are pretty good at figuring out what happened and how to fix it. > Trying the second K3 in its place, and it works fine, tells me that you may > have an issue in the front end. But they will know better. > Good luck getting it working properly! > > 73! > Jack, W6FB > > >> On Jan 21, 2020, at 5:02 PM, John Unger wrote: >> >> Transmit works fine, Martin. >> >>> On Tue, Jan 21, 2020 at 7:46 PM Martin Sole wrote: >>> >>> Is the transmit working okay? >>> >>> Don’t recall if you mentioned before. >>> >>> My early K3 suffered 0.1uf capacitor failure causing loss of injection >>> which affected both tx and rx. Another cap failure caused loss of tx only >>> due to shorted switching voltage. Both were on the RefOsc board. >>> >>> >>> >>> Sent from my iPhone >>> On 22 Jan 2020, at 02:42, John Unger wrote: Wow, guys, thank you all for the suggestions of things to check, but >>> still no joy... Here's your suggestions that I have checked: voltage - 13.6 RX ANT not on I uploaded a couple of old config files - not change Turning RF GAIN fully CCW puts SWR meter at full scale My other K3 hears FB on all the antennas This K3 doesn't have an ATU Switching an antenna in and out makes no apparent difference in received signals No change in BP filters; they have been working fine for long time. I do operate SO2R. The last time radio was working OK was during the NAQP CW contest where I was running 100W. I have operated KW amps in the past >>> on each radio without any front end problems (but there's always the first time, right?). Thanks again for the help 73 - John, W4AU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hs0...@gmail.com >>> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to jackbrin...@me.com > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Remote Operation of K4
What to plug Winkeyer into at the radio end? The K4 is connected to Ethernet, no a computer. Sent from my iPhone ...nr4c. bill > On Jan 20, 2020, at 7:52 PM, Joe Subich, W4TV wrote: > > > > I’ve not seen any USB to paddle interface as yet. > > K1EL Winkeyer used on both ends of the link. With the > K1EL software, the "operator's" Winkeyer converts the > paddle closures to ASCII. The ASCII is transferred to > the remote (radio) WinKeyer where it is converted to > key closures ... > > > 73, > > ... Joe, W4TV > > >> On 2020-01-20 6:58 PM, Nr4c wrote: >> I’ve not been too concerned about the radio end. >> But if I’m in a hotel room with only my laptop, other than using client >> software and keyboard, how to send? I’ve not seen any USB to paddle >> interface as yet. >> Sent from my iPhone >> ...nr4c. bill On Jan 20, 2020, at 5:17 PM, Mike VE3YF wrote: >>> >>> Terry: >>> >>> I am thinking "Wakeup on Lan". That feature is used in other applications, >>> maybe in the K4 as well. >>> >>> -- >>> >>> *73 De Mike* >>> *VE3YF >>> >>> _/http://www.ve3yf.com/_* >>> > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
