[Elecraft] K3S CW AGC-F Not Working?
All: I noticed that he AGC-F setting on my K3S seems to have no effect when in CW mode yet it works in SSB mode. When switching between AGC-F and AGC-S the decay is slow so it appears to be "stuck" in the AGC-S setting when in CW mode. The AGC settings are: AGC DCY = SOFT AGC HLD = 0 AGC PLS = NOR AGC SLP = 10 AGC THR = 10 AGC-F = 130 AGC-S = 8 The rig (SN 11829) was factory assembled. Any ideas? Tony __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft CW Net Announcement
Good Evening, After two weeks a new sunspot has appeared. We are also in a stream of solar wind. Our ionosphere is being refreshed. The auroral oval is strong at the moment. Hopefully things will settle down a bit for tomorrow. Noise levels are still fairly low maybe the signals will pop out. I expect both bands to change during the nets due to the time of year. Twenty meters has been getting longer but I'm reaching different parts of the US. By the time the snow stopped falling I had about a foot. Even with the rain there is still a three to four inch covering. One morning I turned the faucet only to hear a gurgle. I slogged through the sloppy snow to the pump house only to find the relay stuck on. OK, a reset. But that didn't work. Neither did my confused glare. So I shut off the power to the pump and did other chores. A few hours later I turned the breaker back on and reset the relay. A few iterations of that and now the water is running. For some reason it thought the well had run dry in the rainy season. Maybe the confused glare helped. Please join us tomorrow on: 14050 kHz at 2200z Sunday (2 PM PST Sunday) 7047 kHz at z Monday (4 PM PST Sunday) 73, Kevin. KD5ONS - Examples ... show how difficult it often is for an experimenter to interpret his results without the aid of mathematics. — Sir John William Strutt, Lord Rayleigh __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Sudden KpA1500 power reduction
I'm in the ARRL CW contest this weekend and the KPA1500 has been working fine. However, a few minutes ago I noticed I was getting about half the output power on 20 meters that I typically get with around 30 watts drive (about 600w vs 1200w). PA current is less than normal, around 30a. Similar problem on the higher bands, I can no longer get 1000w. On 40m I can, but it requires more drive. Seems like something died in the amp; I'm not familiar with the design, but perhaps an output module. No errors or ill behavior from the amp other than the loss of power. I will contact Elecraft support unless there is something I'm missing here. I just looked in the archive and see that this has happened to others I use the amp remotely so I guess I'll have to take it home with me. Dana __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Big Knob Fail
Even though your s/n is 21, it was not the first K3 kit shipped. I have the first K3 kit shipped, as I assembled the very first one, outside of the beta testers. I also have the original knob and encoder. Ed K1EP s/n 66 On Wed, Feb 17, 2021, 20:46 K9ZTV wrote: > K3 serial number 21 (kit no. 1) has carried the 73cnc weighted knobs on > both the main and sub VFOs for more than 13 years of nearly nightly use. > It has been the primary CW rig for 11 Field Days, numerous special events, > and upwards of a dozen Boy Scout outings. The knobs have been twirled by > club members with heavy fists and kids with youthful exuberance. Yet they > continue to provide the smooth and silky feel characteristic of those > weighted knobs used in high end receivers for nearly 100 years. > > If the tuning shafts and encoders are in imminent danger of “angular > momentum and torque” leading to premature wear, my K3 didn’t get the memo. > > Such concerns about non-Elecraft accessories are usually conjectural in my > opinion, if not plain nonsense. > > 73, > > Kent K9ZTV > > > > > On Feb 17, 2021, at 3:37 PM, someone wrote: > > > > One of the problems with the knobs is that sometimes people change out > the stock injected molded knob for a HEAVY machined knob. The mechanism > inside the radio is not built for this type of installation. A rapid spin > with the angular momentum and torque of the heavy knob will wear out the > device. This will require taking the front panel off and replacing the > component. > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k1ep.l...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX1 For Sale - Tuner / Paddles / 40/30/20
All: I have an Elecraft KX1 for sale. It has the built-in tuner and paddles. Covers 40/30/20 meters. It was aligned and given a once over by Dave, W8FGU. He found a problem with one of the traces on the main board which was repaired. I have the documentation showing the work that was done. The rig looks and functions perfectly. Price - $325 shipped CONUS. Pictures upon request. Tony -K2MO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS – KX2 Loaded Bundle $1000
FS – KX2 Loaded Bundle This was my travel QRP radio kit – but I’m not traveling! It is fully functional and in excellent condition. Price: $1000 (PayPal, includes free shipping CONUS) Bret/N4SRN KX2 80-10 M Transceiver KXIO2 Real-Time Clock KXAT2 Internal, Wide-Range 20-W ATU KXPD2 KXPD2 Precision Keyer Paddle MH3 MH3 Hand Mic. for KX3 KXBC2 External Lithium-ion Fast Charger for KXBT2 KXBT2 (2 each) Lithium-ion Battery Pack; 11V, 2.6Ah BNC-BP BNC Male to Stackable Binding BNC-RA BNC Rt. Angle M-F CS60 Compact Padded Carrying Case KX2GNDPLUG Quick Release Ground Plug with 20M Counterpoise on Winder AX1 Multi-band Whip Antenna w/ AXB1 BiPod & AXE1 40m Extender, Window-mount Suction Cups QRPWorks K-Board, Mini-Keyboard, Battery Holder Easy Digi KF5INZ VOX Digital Interface Side KX Heat Sink Ends (Installed, OEM ends included), Cover & Mount -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3s USB audio problem; both channels identical
As a side note This problem usually is caused by the Windows updates. The update will change the audio codecs in your Windows Sound system. So check the settings after an update to make sure Windows did not change them again. It has happened to me more than times than I care to remember after a Win10 update Rich On 2/20/2021 10:30 AM, h...@kpnplanet.nl wrote: It was a Windows 10 problem after all. I did a complete new WIN10 install on a 3rd PC, just to be sure I was not taken things for granted. Presto. All was working OK now. Two instances of MSHV are both running, while on a separate USB audio channel. I clearly see the spectrum differences of MAIN and SUB in the waterfall. So now I have to figure out what went wrong and why. (and why 2 PC's fooled me in the first place.) Sorry for the bandwidth, disregard my previous mail. 73 Henk PA0C Van: h...@kpnplanet.nl Verzonden: zaterdag 20 februari 2021 11:45 Aan: 'elecraft@mailman.qth.net' Onderwerp: K3s USB audio problem; both channels identical Hi Elecrafters, I found out that I lost the audio of the MAIN RX on the USB port of my K3s (with SUB RX installed) On all other audio outputs (speaker, headphone, line-out) MAIN and SUB audio are present. On the USB port the Right and Left audio stream are identical. (so both L and R is MAIN audio now) I did check on new firmware and I did an MCU LD with all the latest versions available. (which were already loaded anyway) The USB problem was still there. Once again an MCU LD. The audio via USB is still only MAIN (at both channels), no SUB audio. An EE INIT with some older configurations. This should not have any impact and it didn't; no change. CAT is working OK via USB. Different cables make no difference (as expected). Changing L-MIX-R to different settings makes no difference (as expected) Besides USB, power and antenna nothing else is connected to the K3s. After some K3s power cycles the reverse is now happening. USB audio is only SUB audio (both R and L channel) and no MAIN audio is present The rest of the audio outputs remains OK. I did check USB audio on 2 different PC's (both WIN10) with various audio programs which are using Right and/or Left channel audio input (WSJT-X, MSHV, Visual Analyser). All have the same issue. Windows 10 settings are OK, mic. input is set for 2 channels. There are no other programs running, requiring audio input. Visual examination of the KIO3B boards revealed nothing. Anyone with some bright ideas that could help me out? 73 Henk PA0C PS: I did sent a mail to Elecraft support, but hope to get some feedback from this group as well. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3s USB audio problem; both channels identical
It was a Windows 10 problem after all. I did a complete new WIN10 install on a 3rd PC, just to be sure I was not taken things for granted. Presto. All was working OK now. Two instances of MSHV are both running, while on a separate USB audio channel. I clearly see the spectrum differences of MAIN and SUB in the waterfall. So now I have to figure out what went wrong and why. (and why 2 PC's fooled me in the first place.) Sorry for the bandwidth, disregard my previous mail. 73 Henk PA0C Van: h...@kpnplanet.nl Verzonden: zaterdag 20 februari 2021 11:45 Aan: 'elecraft@mailman.qth.net' Onderwerp: K3s USB audio problem; both channels identical Hi Elecrafters, I found out that I lost the audio of the MAIN RX on the USB port of my K3s (with SUB RX installed) On all other audio outputs (speaker, headphone, line-out) MAIN and SUB audio are present. On the USB port the Right and Left audio stream are identical. (so both L and R is MAIN audio now) I did check on new firmware and I did an MCU LD with all the latest versions available. (which were already loaded anyway) The USB problem was still there. Once again an MCU LD. The audio via USB is still only MAIN (at both channels), no SUB audio. An EE INIT with some older configurations. This should not have any impact and it didn't; no change. CAT is working OK via USB. Different cables make no difference (as expected). Changing L-MIX-R to different settings makes no difference (as expected) Besides USB, power and antenna nothing else is connected to the K3s. After some K3s power cycles the reverse is now happening. USB audio is only SUB audio (both R and L channel) and no MAIN audio is present The rest of the audio outputs remains OK. I did check USB audio on 2 different PC's (both WIN10) with various audio programs which are using Right and/or Left channel audio input (WSJT-X, MSHV, Visual Analyser). All have the same issue. Windows 10 settings are OK, mic. input is set for 2 channels. There are no other programs running, requiring audio input. Visual examination of the KIO3B boards revealed nothing. Anyone with some bright ideas that could help me out? 73 Henk PA0C PS: I did sent a mail to Elecraft support, but hope to get some feedback from this group as well. -- Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3s USB audio problem; both channels identical
I found out that I lost the audio of the MAIN RX on the USB port of my K3s Thank Microsoft! In Windows Sound Control Panel (You may need to access it via Settings -> System -> Sound -> Related Settings) Select the Recording tab Select (double click) Line for USB Audio CODEC in the K3 Select the *Advanced* tab Set the Default Format to "2 channel, 16 bit, 48000 Hz" (48 KHz is required for digital applications like WSJTX) Click "Apply" 73, ... Joe, W4TV On 2021-02-20 5:45 AM, h...@kpnplanet.nl wrote: Hi Elecrafters, I found out that I lost the audio of the MAIN RX on the USB port of my K3s (with SUB RX installed) On all other audio outputs (speaker, headphone, line-out) MAIN and SUB audio are present. On the USB port the Right and Left audio stream are identical. (so both L and R is MAIN audio now) I did check on new firmware and I did an MCU LD with all the latest versions available. (which were already loaded anyway) The USB problem was still there. Once again an MCU LD. The audio via USB is still only MAIN (at both channels), no SUB audio. An EE INIT with some older configurations. This should not have any impact and it didn't; no change. CAT is working OK via USB. Different cables make no difference (as expected). Changing L-MIX-R to different settings makes no difference (as expected) Besides USB, power and antenna nothing else is connected to the K3s. After some K3s power cycles the reverse is now happening. USB audio is only SUB audio (both R and L channel) and no MAIN audio is present The rest of the audio outputs remains OK. I did check USB audio on 2 different PC's (both WIN10) with various audio programs which are using Right and/or Left channel audio input (WSJT-X, MSHV, Visual Analyser). All have the same issue. Windows 10 settings are OK, mic. input is set for 2 channels. There are no other programs running, requiring audio input. Visual examination of the KIO3B boards revealed nothing. Anyone with some bright ideas that could help me out? 73 Henk PA0C PS: I did sent a mail to Elecraft support, but hope to get some feedback from this group as well. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K4 10MHz Reference level??
Hello Elecraft K4 design team. Looking for spec defining requirements 10MHz Reference level for K4. Not in documentation?? Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3s USB audio problem; both channels identical
Hi Elecrafters, I found out that I lost the audio of the MAIN RX on the USB port of my K3s (with SUB RX installed) On all other audio outputs (speaker, headphone, line-out) MAIN and SUB audio are present. On the USB port the Right and Left audio stream are identical. (so both L and R is MAIN audio now) I did check on new firmware and I did an MCU LD with all the latest versions available. (which were already loaded anyway) The USB problem was still there. Once again an MCU LD. The audio via USB is still only MAIN (at both channels), no SUB audio. An EE INIT with some older configurations. This should not have any impact and it didn't; no change. CAT is working OK via USB. Different cables make no difference (as expected). Changing L-MIX-R to different settings makes no difference (as expected) Besides USB, power and antenna nothing else is connected to the K3s. After some K3s power cycles the reverse is now happening. USB audio is only SUB audio (both R and L channel) and no MAIN audio is present The rest of the audio outputs remains OK. I did check USB audio on 2 different PC's (both WIN10) with various audio programs which are using Right and/or Left channel audio input (WSJT-X, MSHV, Visual Analyser). All have the same issue. Windows 10 settings are OK, mic. input is set for 2 channels. There are no other programs running, requiring audio input. Visual examination of the KIO3B boards revealed nothing. Anyone with some bright ideas that could help me out? 73 Henk PA0C PS: I did sent a mail to Elecraft support, but hope to get some feedback from this group as well. -- Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com