[Elecraft] KRX3A for sale (new synth) - $635/shipped
Late last year I purchased this off another amateur on the list (an accomplished contester) but my plans have changed and I never installed this. This subreceiver has the new synthesizer & 2.8 and 400Khz eight pole filters plus all installation hardware except for the little ring pad that cushions the top-mounted speaker (available from Elecraft). Shipped CONUS, $635. Bob Brown, N1CVX Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Code to Command DVK
https://www.dseven.org/ar/n1mm-kdvr3 See if the info at the above link helps. On 3/6/2021 14:27 PM, Peter Chamalian wrote: I'm looking for some code that I can write into an N1MM macro that will trigger playing one of the 4 memories in a K3S. I've looked in the programmer reference manual but I'm not finding any command to do that. Any suggestions? Pete Chamalian, W1RM w...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to rwnewbo...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [N1MM+] Code to Command DVK
Hi Pete,
It's in the N1MM documentation.
F1 CQ,{CATA1ASC SWT21;}
F2 Exch,{CATA1ASC SWT31;}
F3 TU,{CATA1ASC SWT35;}
F4 {MYCALL},{CATA1ASC SWT39:}
73, Jim N7US
From: n1mmloggerp...@groups.io On Behalf Of Pete
W1RM via groups.io
Sent: Saturday, March 6, 2021 13:27
To: Elecraft@mailman.qth.net; n1mmloggerp...@groups.io
Subject: [N1MM+] Code to Command DVK
I'm looking for some code that I can write into an N1MM macro that will trigger
playing one of the 4 memories in a K3S. I've looked in the programmer
reference manual but I'm not finding any command to do that.
Any suggestions?
Pete Chamalian, W1RM
w...@comcast.net
_._,_._,_
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
Re: [Elecraft] Remote Programs for KPA500 & KAT500
Would you mind sharing the link with the lists, in case someone else is looking for them? On Sat, Mar 6, 2021 at 2:20 PM Irwin KD3TB wrote: > Found the programs and user manuals > > On Sat, Mar 6, 2021 at 2:06 PM Irwin KD3TB wrote: > > > In addition to the KPA500 & KAT500 Utilities, are there any remote > > programs that can control the amp and tuner remotely either through the > USB > > port or an Internet connection? > > > > Thanks, Irwin KD3TB > > > > > -- > Irwin KD3TB > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to ju...@juliatuttle.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Code to Command DVK
I'm looking for some code that I can write into an N1MM macro that will trigger playing one of the 4 memories in a K3S. I've looked in the programmer reference manual but I'm not finding any command to do that. Any suggestions? Pete Chamalian, W1RM w...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Remote Programs for KPA500 & KAT500
Found the programs and user manuals On Sat, Mar 6, 2021 at 2:06 PM Irwin KD3TB wrote: > In addition to the KPA500 & KAT500 Utilities, are there any remote > programs that can control the amp and tuner remotely either through the USB > port or an Internet connection? > > Thanks, Irwin KD3TB > -- Irwin KD3TB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Remote Programs for KPA500 & KAT500
In addition to the KPA500 & KAT500 Utilities, are there any remote programs that can control the amp and tuner remotely either through the USB port or an Internet connection? Thanks, Irwin KD3TB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft Hex key collectible on eBay
I have one I will part with for half that —$200. 73, Tom K4AEN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Offset when in SSB+CW on a KX2
You're right -- the CW-in-SSB offset *is* the sidetone, which can be set with PITCH. There's no separate setting, and also no way to turn it off. If you're curious what you're putting out on the air, you may be able to find a nearby kiwisdr to monitor your signal at http://rx.linkfanel.net/. On Sat, Mar 6, 2021 at 1:08 PM Bob Liesen wrote: > Julia, > Thanks for the quick response. So is there an operator adjustable > setting that controls the TX RF frequency when I close the key when in USB > mode? At first I thought the "pitch" menu setting was it, but now I'm not > so sure. Tooo many menus!! > Bob WB0POQ > > On Sat, Mar 6, 2021 at 11:52 AM Julia Tuttle > wrote: > >> Yeah, that will happen. >> >> In CW mode, the rig "lines up" the VFO frequency and your sidetone. >> >> In USB mode, the rig uses the VFO frequency as the "edge" of the >> sideband, and if you hear or send at your sidetone, you'll have to add that >> to the VFO frequency to get the actual frequency of the CW signal. If you >> tune the other station to match your sidetone and then call her, you >> *should* still end up coming back on the same frequency -- it just won't be >> what's on your screen. >> >> If you want to make the math easier, you could set your sidetone to 500 >> Hz. You might also try CW mode with the filter wide open, but it still tops >> out at 2800 Hz instead of 4000 Hz, so it might not be wide enough for your >> taste. >> >> On Sat, Mar 6, 2021 at 12:37 PM Bob Liesen wrote: >> >>> Hi gang, >>> Still learning about my KX2. One thing I think I screwed up while >>> struggling with getting digital mode A set up is the offset when running >>> SSB+CW mode. I like setting the radio to USB on 20m for instance, and >>> then >>> using a key for TX. I like the wider RX bandwidth offered in USB on RX. >>> However, now when I tune in a CW station, and call him, it seems I am >>> quite a ways off his RX frequency. Any thoughts? >>> >>> Tnx! >>> Bob WB0POQ >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to ju...@juliatuttle.net >>> >> __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Offset when in SSB+CW on a KX2
Yeah, that will happen. In CW mode, the rig "lines up" the VFO frequency and your sidetone. In USB mode, the rig uses the VFO frequency as the "edge" of the sideband, and if you hear or send at your sidetone, you'll have to add that to the VFO frequency to get the actual frequency of the CW signal. If you tune the other station to match your sidetone and then call her, you *should* still end up coming back on the same frequency -- it just won't be what's on your screen. If you want to make the math easier, you could set your sidetone to 500 Hz. You might also try CW mode with the filter wide open, but it still tops out at 2800 Hz instead of 4000 Hz, so it might not be wide enough for your taste. On Sat, Mar 6, 2021 at 12:37 PM Bob Liesen wrote: > Hi gang, > Still learning about my KX2. One thing I think I screwed up while > struggling with getting digital mode A set up is the offset when running > SSB+CW mode. I like setting the radio to USB on 20m for instance, and then > using a key for TX. I like the wider RX bandwidth offered in USB on RX. > However, now when I tune in a CW station, and call him, it seems I am > quite a ways off his RX frequency. Any thoughts? > > Tnx! > Bob WB0POQ > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to ju...@juliatuttle.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Offset when in SSB+CW on a KX2
Hi gang, Still learning about my KX2. One thing I think I screwed up while struggling with getting digital mode A set up is the offset when running SSB+CW mode. I like setting the radio to USB on 20m for instance, and then using a key for TX. I like the wider RX bandwidth offered in USB on RX. However, now when I tune in a CW station, and call him, it seems I am quite a ways off his RX frequency. Any thoughts? Tnx! Bob WB0POQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] 75 Meter Elecraft Net - Sunday
Due to people wishing to sit next to us and throw carriers ... Please take note of 3.825 3.825 at 01:00 UTC AND there is the chance someone will be there ... 75m is funny that way IF you don't hear us, we hide in the open spots Please take note of 3.825 3.825 at 01:00 UTC Sunday night in the US and Monday morning in UTC Land Keep smiling and be safe "See" you on the Nets 73 Paul Van Dyke KB9AVO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
