Re: [Elecraft] K3 / WSJT-X Delayed Transmit
Jim, Two possible fixes: 1) Use PTT via CAT command - most digital applications provide for it. 2) Check that your audio levels are sufficient - for the Elecraft gear, you should have 4 bars of ALC solid with the 5th one blinking. See the full explanation on my website www.w3fpr.com. 73, Don W3FPR On 10/11/2021 3:23 PM, James Bennett via Elecraft wrote: David - I’ve played with the VOX Gain to no avail - at zero the rig never transmits, and at 100 (where it has been sitting) I get the delay. Various settings in between have no effect. The Delay controls how quickly the rig goes back into receive mode after speaking. But, thanks for the hints! Jim Bennett / K7TXA Eagle, ID On Oct 11, 2021, at 12:00 PM, D Remy wrote: I know nothing about operating in the digital modes but wonder if the delays might be changed with Vox Gain and Delay settings. Good luck! David, NS4V David R. Hourdequin, PE Specialty Heavy Timber Engineer 828-421-6216 On Oct 11, 2021, at 13:57, James Bennett via Elecraft wrote: Hi Folks, Wondering if someone on the list might be able to solve this one. I’m using a K3 and while CW is my main passion, I do dabble in FT8 occasionally. I’ve noticed that the radio does not start transmitting right at the start of the 15 second FT8 cycle. It will start anywhere from 2 - 5 seconds into the cycle. I can’t help but think that is not a good thing and could be the cause of an occasional missed QSO. I DO make QSOs but this kinda bothers me. The audio signals are delayed this amount of time, as is the red TX light coming on - I am using VOX . Same thing happens when I press the TUNE button - it takes anywhere from 2-5 seconds for the rig to go into transmit mode. I really doubt it is due to computer overload, as the only applications running are WSJT-X, MacLoggerDX (my logging program), and JT-Bridge - all other applications have been ended. Since this happens when I press TUNE, that pretty much eliminates JT-Bridge and MacLoggerDX as the cause. Some hardware and software specifics: Mac mini, 32 GB RAM, 3GHz processor, 6 cores, Intel Core i5. Mac OS Big Sur 11.5 WSJT-X 2.4.0 Audio Interface: Tascam US-125M external USB device Values in the DT column are consistently about 0.1 - 0.4 Wasn’t sure if I should post this here or on the WSJT-X list, but I thought I’d start here. Any ideas? Jim / K7TXA Eagle, ID __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@dremy.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@w3fpr.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 / WSJT-X Delayed Transmit
On 10/11/2021 11:45 AM, David Olean wrote: Update the software to the latest. That was a known bug in earlier versions. I had the same problem with my K3. Yes. It's a problem between WSJT-X and hamlib. WSJT-X was sending more rig control commands than necessary. Also, don't tell WSJT-X to do anything to the K3 except do the split thing, which minimizes harmonic distortion caused by overdriving the rig's audio input or modulator. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 / WSJT-X Delayed Transmit
Problem solved - it was simply a matter of upgrading to version 2.5 of WSJT-X. Works fine now. Thanks to all who replied!! Jim Bennett / K7TXA Eagle, ID > On Oct 11, 2021, at 11:31 AM, James Bennett via Elecraft > wrote: > > Hi Folks, > > Wondering if someone on the list might be able to solve this one. I’m using a > K3 and while CW is my main passion, I do dabble in FT8 occasionally. I’ve > noticed that the radio does not start transmitting right at the start of the > 15 second FT8 cycle. It will start anywhere from 2 - 5 seconds into the > cycle. I can’t help but think that is not a good thing and could be the cause > of an occasional missed QSO. I DO make QSOs but this kinda bothers me. The > audio signals are delayed this amount of time, as is the red TX light coming > on - I am using VOX . Same thing happens when I press the TUNE button - it > takes anywhere from 2-5 seconds for the rig to go into transmit mode. > > I really doubt it is due to computer overload, as the only applications > running are WSJT-X, MacLoggerDX (my logging program), and JT-Bridge - all > other applications have been ended. Since this happens when I press TUNE, > that pretty much eliminates JT-Bridge and MacLoggerDX as the cause. Some > hardware and software specifics: > > Mac mini, 32 GB RAM, 3GHz processor, 6 cores, Intel Core i5. > Mac OS Big Sur 11.5 > WSJT-X 2.4.0 > Audio Interface: Tascam US-125M external USB device > Values in the DT column are consistently about 0.1 - 0.4 > > Wasn’t sure if I should post this here or on the WSJT-X list, but I thought > I’d start here. Any ideas? > > > Jim / K7TXA > Eagle, ID > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w6...@me.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 / WSJT-X Delayed Transmit
Update to the latest WSJTX and hamlib. The problem is due to a timing issue in the older versions of hamlib not allowing WSJTX to begin audio until it receives certain CAT responses from the K3/K3s. Older versions of hamlib were doing too many (unnecessary) CAT commands. 73, ... Joe, W4TV On 2021-10-11 3:23 PM, James Bennett via Elecraft wrote: David - I’ve played with the VOX Gain to no avail - at zero the rig never transmits, and at 100 (where it has been sitting) I get the delay. Various settings in between have no effect. The Delay controls how quickly the rig goes back into receive mode after speaking. But, thanks for the hints! Jim Bennett / K7TXA Eagle, ID On Oct 11, 2021, at 12:00 PM, D Remy wrote: I know nothing about operating in the digital modes but wonder if the delays might be changed with Vox Gain and Delay settings. Good luck! David, NS4V David R. Hourdequin, PE Specialty Heavy Timber Engineer 828-421-6216 On Oct 11, 2021, at 13:57, James Bennett via Elecraft wrote: Hi Folks, Wondering if someone on the list might be able to solve this one. I’m using a K3 and while CW is my main passion, I do dabble in FT8 occasionally. I’ve noticed that the radio does not start transmitting right at the start of the 15 second FT8 cycle. It will start anywhere from 2 - 5 seconds into the cycle. I can’t help but think that is not a good thing and could be the cause of an occasional missed QSO. I DO make QSOs but this kinda bothers me. The audio signals are delayed this amount of time, as is the red TX light coming on - I am using VOX . Same thing happens when I press the TUNE button - it takes anywhere from 2-5 seconds for the rig to go into transmit mode. I really doubt it is due to computer overload, as the only applications running are WSJT-X, MacLoggerDX (my logging program), and JT-Bridge - all other applications have been ended. Since this happens when I press TUNE, that pretty much eliminates JT-Bridge and MacLoggerDX as the cause. Some hardware and software specifics: Mac mini, 32 GB RAM, 3GHz processor, 6 cores, Intel Core i5. Mac OS Big Sur 11.5 WSJT-X 2.4.0 Audio Interface: Tascam US-125M external USB device Values in the DT column are consistently about 0.1 - 0.4 Wasn’t sure if I should post this here or on the WSJT-X list, but I thought I’d start here. Any ideas? Jim / K7TXA Eagle, ID __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 / WSJT-X Delayed Transmit
David - I’ve played with the VOX Gain to no avail - at zero the rig never transmits, and at 100 (where it has been sitting) I get the delay. Various settings in between have no effect. The Delay controls how quickly the rig goes back into receive mode after speaking. But, thanks for the hints! Jim Bennett / K7TXA Eagle, ID > On Oct 11, 2021, at 12:00 PM, D Remy wrote: > > I know nothing about operating in the digital modes but wonder if the delays > might be changed with Vox Gain and Delay settings. > > Good luck! > David, NS4V > > > David R. Hourdequin, PE > Specialty Heavy Timber Engineer > 828-421-6216 > >> On Oct 11, 2021, at 13:57, James Bennett via Elecraft >> wrote: >> >> Hi Folks, >> >> Wondering if someone on the list might be able to solve this one. I’m using >> a K3 and while CW is my main passion, I do dabble in FT8 occasionally. I’ve >> noticed that the radio does not start transmitting right at the start of the >> 15 second FT8 cycle. It will start anywhere from 2 - 5 seconds into the >> cycle. I can’t help but think that is not a good thing and could be the >> cause of an occasional missed QSO. I DO make QSOs but this kinda bothers me. >> The audio signals are delayed this amount of time, as is the red TX light >> coming on - I am using VOX . Same thing happens when I press the TUNE button >> - it takes anywhere from 2-5 seconds for the rig to go into transmit mode. >> >> I really doubt it is due to computer overload, as the only applications >> running are WSJT-X, MacLoggerDX (my logging program), and JT-Bridge - all >> other applications have been ended. Since this happens when I press TUNE, >> that pretty much eliminates JT-Bridge and MacLoggerDX as the cause. Some >> hardware and software specifics: >> >> Mac mini, 32 GB RAM, 3GHz processor, 6 cores, Intel Core i5. >> Mac OS Big Sur 11.5 >> WSJT-X 2.4.0 >> Audio Interface: Tascam US-125M external USB device >> Values in the DT column are consistently about 0.1 - 0.4 >> >> Wasn’t sure if I should post this here or on the WSJT-X list, but I thought >> I’d start here. Any ideas? >> >> >> Jim / K7TXA >> Eagle, ID >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to d...@dremy.com > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 / WSJT-X Delayed Transmit
James, I had the same problem here running a Mac. Solved it by going to CAT, Mode = None, Split = None. I have no delay now. John WA1EAZ > On Oct 11, 2021, at 1:31 PM, James Bennett via Elecraft > wrote: > > Hi Folks, > > Wondering if someone on the list might be able to solve this one. I’m using a > K3 and while CW is my main passion, I do dabble in FT8 occasionally. I’ve > noticed that the radio does not start transmitting right at the start of the > 15 second FT8 cycle. It will start anywhere from 2 - 5 seconds into the > cycle. I can’t help but think that is not a good thing and could be the cause > of an occasional missed QSO. I DO make QSOs but this kinda bothers me. The > audio signals are delayed this amount of time, as is the red TX light coming > on - I am using VOX . Same thing happens when I press the TUNE button - it > takes anywhere from 2-5 seconds for the rig to go into transmit mode. > > I really doubt it is due to computer overload, as the only applications > running are WSJT-X, MacLoggerDX (my logging program), and JT-Bridge - all > other applications have been ended. Since this happens when I press TUNE, > that pretty much eliminates JT-Bridge and MacLoggerDX as the cause. Some > hardware and software specifics: > > Mac mini, 32 GB RAM, 3GHz processor, 6 cores, Intel Core i5. > Mac OS Big Sur 11.5 > WSJT-X 2.4.0 > Audio Interface: Tascam US-125M external USB device > Values in the DT column are consistently about 0.1 - 0.4 > > Wasn’t sure if I should post this here or on the WSJT-X list, but I thought > I’d start here. Any ideas? > > > Jim / K7TXA > Eagle, ID > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jstengrev...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 / WSJT-X Delayed Transmit
My K3 does the exact same thing and I’m running Windows 10 Ron W5SUM Sent from my iPhone > On Oct 11, 2021, at 12:55 PM, James Bennett via Elecraft > wrote: > > Hi Folks, > > Wondering if someone on the list might be able to solve this one. I’m using a > K3 and while CW is my main passion, I do dabble in FT8 occasionally. I’ve > noticed that the radio does not start transmitting right at the start of the > 15 second FT8 cycle. It will start anywhere from 2 - 5 seconds into the > cycle. I can’t help but think that is not a good thing and could be the cause > of an occasional missed QSO. I DO make QSOs but this kinda bothers me. The > audio signals are delayed this amount of time, as is the red TX light coming > on - I am using VOX . Same thing happens when I press the TUNE button - it > takes anywhere from 2-5 seconds for the rig to go into transmit mode. > > I really doubt it is due to computer overload, as the only applications > running are WSJT-X, MacLoggerDX (my logging program), and JT-Bridge - all > other applications have been ended. Since this happens when I press TUNE, > that pretty much eliminates JT-Bridge and MacLoggerDX as the cause. Some > hardware and software specifics: > > Mac mini, 32 GB RAM, 3GHz processor, 6 cores, Intel Core i5. > Mac OS Big Sur 11.5 > WSJT-X 2.4.0 > Audio Interface: Tascam US-125M external USB device > Values in the DT column are consistently about 0.1 - 0.4 > > Wasn’t sure if I should post this here or on the WSJT-X list, but I thought > I’d start here. Any ideas? > > > Jim / K7TXA > Eagle, ID > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w5...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 / WSJT-X Delayed Transmit
Update the software to the latest. That was a known bug in earlier versions. I had the same problem with my K3. Dave K1WHS On 10/11/2021 1:31 PM, James Bennett via Elecraft wrote: Hi Folks, Wondering if someone on the list might be able to solve this one. I’m using a K3 and while CW is my main passion, I do dabble in FT8 occasionally. I’ve noticed that the radio does not start transmitting right at the start of the 15 second FT8 cycle. It will start anywhere from 2 - 5 seconds into the cycle. I can’t help but think that is not a good thing and could be the cause of an occasional missed QSO. I DO make QSOs but this kinda bothers me. The audio signals are delayed this amount of time, as is the red TX light coming on - I am using VOX . Same thing happens when I press the TUNE button - it takes anywhere from 2-5 seconds for the rig to go into transmit mode. I really doubt it is due to computer overload, as the only applications running are WSJT-X, MacLoggerDX (my logging program), and JT-Bridge - all other applications have been ended. Since this happens when I press TUNE, that pretty much eliminates JT-Bridge and MacLoggerDX as the cause. Some hardware and software specifics: Mac mini, 32 GB RAM, 3GHz processor, 6 cores, Intel Core i5. Mac OS Big Sur 11.5 WSJT-X 2.4.0 Audio Interface: Tascam US-125M external USB device Values in the DT column are consistently about 0.1 - 0.4 Wasn’t sure if I should post this here or on the WSJT-X list, but I thought I’d start here. Any ideas? Jim / K7TXA Eagle, ID __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k1...@metrocast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 / WSJT-X Delayed Transmit
Hi Folks, Wondering if someone on the list might be able to solve this one. I’m using a K3 and while CW is my main passion, I do dabble in FT8 occasionally. I’ve noticed that the radio does not start transmitting right at the start of the 15 second FT8 cycle. It will start anywhere from 2 - 5 seconds into the cycle. I can’t help but think that is not a good thing and could be the cause of an occasional missed QSO. I DO make QSOs but this kinda bothers me. The audio signals are delayed this amount of time, as is the red TX light coming on - I am using VOX . Same thing happens when I press the TUNE button - it takes anywhere from 2-5 seconds for the rig to go into transmit mode. I really doubt it is due to computer overload, as the only applications running are WSJT-X, MacLoggerDX (my logging program), and JT-Bridge - all other applications have been ended. Since this happens when I press TUNE, that pretty much eliminates JT-Bridge and MacLoggerDX as the cause. Some hardware and software specifics: Mac mini, 32 GB RAM, 3GHz processor, 6 cores, Intel Core i5. Mac OS Big Sur 11.5 WSJT-X 2.4.0 Audio Interface: Tascam US-125M external USB device Values in the DT column are consistently about 0.1 - 0.4 Wasn’t sure if I should post this here or on the WSJT-X list, but I thought I’d start here. Any ideas? Jim / K7TXA Eagle, ID __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] PX3 firmware update.
I have successfully updated my KX2 and KX£ but when it came to the pan adapter I received from the utility PX3 not responding (I did according to the manual)(and directly after the KX’s Any thoughts? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] sticky thermal pads for K3 LPA Mosfets
It may not be what E uses. 3M makes "sticky" pads. I use them for my Raspberry Pi computer. See: https://www.3m.com/3M/en_US/p/d/b5005065038/ and https://www.3m.com/3M/en_US/p/d/b00051394/ 73, steve WB3LGC On 10/8/21 5:35 PM, Ron Gorski wrote: I need a description of the sticky thermal pads used between the K3 LPA Mosfets and the bottom panel on the K3. Specifically, I wish to know thermal conductivity and physical thickness. A brand name and or vendor would be helpful. Thanks for reading Ron N9AU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Re KX3 power supply
I want to thank all of the people who responded to my request for information about powering a KX3. This is a great group and I appreciate all of the information that was given. 73, Paul - N8XMS 100% QRP CW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com