[Elecraft] K3 line out only provides left channel audio
For some reason, I am not getting any right channel output from the LIN OUT jack of my K3, either in diversity or normal mode. I hear both receivers properly from the headphone jack, but when I connect my phones to the line output, I can only hear the left channel, which is the main RX. Line out is configured for NOR, level is 10. L-R MIX is set to A B, though it shouldn't matter in diversity mode. It isn't a cabling issue, because I have the problem with the phones directly plugged into the LIN OUT jack. I never tried to use this feature before, so I don't know if it worked before. I hope there is something I'm overlooking here... -- 73, Victor, 4X6GP Rehovot, Israel Formerly K2VCO CWops no. 5 http://www.qsl.net/k2vco/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] WTB: KXV3 Or KXV3A I/O Interface For K3
I am looking for a KXV3 or KXV3A I/O module interface for the K3. Please reply off list. Thanks. 73 Randy w...@aol.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] WTB: K1 (or boards) for parts
Looking for a K1 and/or related boards (KFL1-2, KAT1) for parts/repair. Working is a bonus ;) Please email me off list. Thanks & 73, -Andrew / NV1B .. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K4D Data Connector for KPOD
Where is this Data Connector located on the K4 ? The KPOD documentation only refers to the K3 & K3S and is not updated for the K4 73 Ray G3XLG Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4D Data Connector for KPOD
USB cable. reply to: k...@arrl.net On Thu, Jan 20, 2022, 11:59 Ray Spreadbury via Elecraft < elecraft@mailman.qth.net> wrote: > Where is this Data Connector located on the K4 ? > The KPOD documentation only refers to the K3 & K3S and is not updated for > the K4 > 73 Ray G3XLG > > Sent from Mail for Windows > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k1ep.l...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: Lambda & HP linear power supplies
"W3DVX Rescues Legacy Elecrafts" Hello, Selling two linear supplies that I’ve not used in awhile: Lambda LM CC12 with OVP protector 12V +- 5% but extends beyond, 7.3A With 120V and 12V cables. Connector for K2. With manuals. Minor scratch on one side. Weighs about 15 lbs before packing. $65 + shipping, OBO HP 6111A lab supply 0-20V, 0-1A; metered, current-limit adjust. Perfect for bench experiments. Thumb wheels set voltage, but a bit off; meter shows correct voltage. Weight about 12 lbs before packing. $75 + shipping, OBO. Photos on Dropbox at https://www.dropbox.com/sh/5sswg3ubgevjr61/AABHBrgyMur1N4jKd7PhLIHoa?dl=0 Cheers, Alan Alan D. Wilcox, W3DVX (K2-5373, K3-40, SKCC 22955) 570-916-9590 (cell, text) https://WilcoxEngineering.com http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments http://amazon.com/author/alandwilcox Williamsport, PA 17701 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] SVGA Board For K3
The SVGA board in one of my two P3s has failed, and a friend who works for Elecraft told me it's un-repairable. The reason is that its the failure of a large chip that simply cannot be un-soldered. He also tells me that orders for the board are still being accepted for an unpredictable delivery time, but that at least a couple dozen more orders are needed to make a production run. The SVGA board is a wonderful tool that I find invaluable. If you want one, now's the time to order it. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 line out only provides left channel audio
Hi Vic, I just checked my K3s and the line OT is indeed a stereo signal. My MENU settings are exactly like yours. Jim - WS6X -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Victor Rosenthal 4X6GP Sent: Thursday, January 20, 2022 10:02 AM To: Elecraft Reflector Subject: [Elecraft] K3 line out only provides left channel audio For some reason, I am not getting any right channel output from the LIN OUT jack of my K3, either in diversity or normal mode. I hear both receivers properly from the headphone jack, but when I connect my phones to the line output, I can only hear the left channel, which is the main RX. Line out is configured for NOR, level is 10. L-R MIX is set to A B, though it shouldn't matter in diversity mode. It isn't a cabling issue, because I have the problem with the phones directly plugged into the LIN OUT jack. I never tried to use this feature before, so I don't know if it worked before. I hope there is something I'm overlooking here... -- 73, Victor, 4X6GP Rehovot, Israel Formerly K2VCO CWops no. 5 http://www.qsl.net/k2vco/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] SVGA Board For K3
What is the chip and what package is it in? 73, Mark W7MLG On Thu, Jan 20, 2022 at 4:47 PM Jim Brown wrote: > The SVGA board in one of my two P3s has failed, and a friend who works > for Elecraft told me it's un-repairable. The reason is that its the > failure of a large chip that simply cannot be un-soldered. He also tells > me that orders for the board are still being accepted for an > unpredictable delivery time, but that at least a couple dozen more > orders are needed to make a production run. > > The SVGA board is a wonderful tool that I find invaluable. If you want > one, now's the time to order it. > > 73, Jim K9YC > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to marklgoldb...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] SVGA Board For K3
On 1/20/2022 4:18 PM, Mark Goldberg wrote: What is the chip and what package is it in? It is a VERY large array with a very large number of very dense contacts. If you want to know more, you'll have to contact Elecraft. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] SVGA Board For K3
The FPGA is a Xilinx XC6SLX9 in a FTG256 1.0 mm pitch BGA package. Ken K6MR From: elecraft-boun...@mailman.qth.net on behalf of Mark Goldberg Sent: Thursday, January 20, 2022 4:18 PM To: j...@audiosystemsgroup.com Cc: Reflector Elecraft Subject: Re: [Elecraft] SVGA Board For K3 What is the chip and what package is it in? 73, Mark W7MLG On Thu, Jan 20, 2022 at 4:47 PM Jim Brown wrote: > The SVGA board in one of my two P3s has failed, and a friend who works > for Elecraft told me it's un-repairable. The reason is that its the > failure of a large chip that simply cannot be un-soldered. He also tells > me that orders for the board are still being accepted for an > unpredictable delivery time, but that at least a couple dozen more > orders are needed to make a production run. > > The SVGA board is a wonderful tool that I find invaluable. If you want > one, now's the time to order it. > > 73, Jim K9YC > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to marklgoldb...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@outlook.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] SVGA Board For K3
If it is an FPGA, you will need to get Elecraft to program it. 73 Bill AE6JV > On Jan 20, 2022, at 9:03 PM, Ken K6MR wrote: > > The FPGA is a Xilinx XC6SLX9 in a FTG256 1.0 mm pitch BGA package. > > Ken K6MR > > > From: elecraft-boun...@mailman.qth.net on > behalf of Mark Goldberg > Sent: Thursday, January 20, 2022 4:18 PM > To: j...@audiosystemsgroup.com > Cc: Reflector Elecraft > Subject: Re: [Elecraft] SVGA Board For K3 > > What is the chip and what package is it in? > > 73, > > Mark > W7MLG > > On Thu, Jan 20, 2022 at 4:47 PM Jim Brown wrote: > >> The SVGA board in one of my two P3s has failed, and a friend who works >> for Elecraft told me it's un-repairable. The reason is that its the >> failure of a large chip that simply cannot be un-soldered. He also tells >> me that orders for the board are still being accepted for an >> unpredictable delivery time, but that at least a couple dozen more >> orders are needed to make a production run. >> >> The SVGA board is a wonderful tool that I find invaluable. If you want >> one, now's the time to order it. >> >> 73, Jim K9YC >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to marklgoldb...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] SVGA Board For K3
"If it is an FPGA, you will need to get Elecraft to program it." No. The FPGA gets loaded each time you turn on the P3. There are different code images for each monitor resolution. So the uP checks which resolution you have selected and loads the proper code for that resolution. Ken K6MR From: Bill Frantz Sent: Thursday, January 20, 2022 6:36 PM To: Ken K6MR Cc: Mark Goldberg ; Reflector Elecraft Subject: Re: [Elecraft] SVGA Board For K3 If it is an FPGA, you will need to get Elecraft to program it. 73 Bill AE6JV > On Jan 20, 2022, at 9:03 PM, Ken K6MR wrote: > > The FPGA is a Xilinx XC6SLX9 in a FTG256 1.0 mm pitch BGA package. > > Ken K6MR > > > From: elecraft-boun...@mailman.qth.net on > behalf of Mark Goldberg > Sent: Thursday, January 20, 2022 4:18 PM > To: j...@audiosystemsgroup.com > Cc: Reflector Elecraft > Subject: Re: [Elecraft] SVGA Board For K3 > > What is the chip and what package is it in? > > 73, > > Mark > W7MLG > > On Thu, Jan 20, 2022 at 4:47 PM Jim Brown wrote: > >> The SVGA board in one of my two P3s has failed, and a friend who works >> for Elecraft told me it's un-repairable. The reason is that its the >> failure of a large chip that simply cannot be un-soldered. He also tells >> me that orders for the board are still being accepted for an >> unpredictable delivery time, but that at least a couple dozen more >> orders are needed to make a production run. >> >> The SVGA board is a wonderful tool that I find invaluable. If you want >> one, now's the time to order it. >> >> 73, Jim K9YC >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to marklgoldb...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] SVGA Board For K3
With the right tools and a highly skilled operator, that can be replaced. I've seen FG456 BGAs replaced. Personally, I have neither the tools nor the skills. And, I don't mean the $500 BGA rework machines. I mean the ones that cost many times what the board costs. 73, Mark W7MLG On Thu, Jan 20, 2022 at 7:03 PM Ken K6MR wrote: > The FPGA is a Xilinx XC6SLX9 in a FTG256 1.0 mm pitch BGA package. > > *Ken K6MR * > > -- > *From:* elecraft-boun...@mailman.qth.net > on behalf of Mark Goldberg > *Sent:* Thursday, January 20, 2022 4:18 PM > *To:* j...@audiosystemsgroup.com > *Cc:* Reflector Elecraft > *Subject:* Re: [Elecraft] SVGA Board For K3 > > What is the chip and what package is it in? > > 73, > > Mark > W7MLG > > On Thu, Jan 20, 2022 at 4:47 PM Jim Brown > wrote: > > > The SVGA board in one of my two P3s has failed, and a friend who works > > for Elecraft told me it's un-repairable. The reason is that its the > > failure of a large chip that simply cannot be un-soldered. He also tells > > me that orders for the board are still being accepted for an > > unpredictable delivery time, but that at least a couple dozen more > > orders are needed to make a production run. > > > > The SVGA board is a wonderful tool that I find invaluable. If you want > > one, now's the time to order it. > > > > 73, Jim K9YC > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to marklgoldb...@gmail.com > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k...@outlook.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
