[Elecraft] FOR SALE: Heil PR-781 With Heil Boom Hardware For Elecraft K3 or K4

2023-05-17 Thread Tony

All:

I have a Heil PR-781 microphone with Heil boom and hardware. Comes with 
Heil XLR cable for either the Elecraft K4 or K3 transceivers. Microphone 
and hardware come in their original boxes. This includes the Heil PL2T 
boom, RS-1 riser.


Items sell for $400 + if purchased new. Microphone alone sells for $200.00

Asking $275.00shipped -- pictures upon request. Original owner non-smoker.

Please contact me direct via email.

Tony -K2MO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] Microphone Setup Confusion

2023-05-17 Thread Walter Underwood
That link has some weird special characters stuck on the end of it. Not sure 
how that happened. This link works 
https://elecraft-kx.groups.io/g/main/message/9486 and is the link in the 
updated blog post.

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On May 17, 2023, at 12:21 PM, Jay  wrote:
> 
> Walter,
> 
> Tried link. Got the following message:  That message number does not exist. 
> The message may have been deleted.
> 
> Maybe a digit missing on the message number?
> 
> 73
> Jay K3 BH
> 
> On Wed, May 17, 2023, at 11:51, Walter Underwood wrote:
>> Ah, found the original. groups.io   
>> did a really nice job of copying over the archives from Yahoo! Groups.
>> 
>> https://elecraft-kx.groups.io/g/main/message/9486 
>> 
>> wunder
>> K6WRU
>> Walter Underwood
>> CM87wj
>> http://observer.wunderwood.org/ (my blog)
>> 
>> 
>> > On May 17, 2023, at 8:44 AM, Walter Underwood > > > wrote:
>> > 
>> > Thanks, I’ll check the link. Ah, that is a link to the post on Yahoo! 
>> > Groups, but Yahoo! shut all that down and didn’t even leave the archives 
>> > live. Sigh. I’ll try and find it elsewhere.
>> > 
>> > It looks like I reposted his 2012 post in 2014, so maybe I’ll link to that.
>> > 
>> > https://elecraft-kx.groups.io/g/main/message/46148?p=%2C%2C%2C20%2C0%2C0%2C0%3A%3Acreated%2C0%2Ckk7p+mic+bias%2C20%2C2%2C0%2C35006985
>> >  
>> > 
>> > 
>> > wunder
>> > K6WRU
>> > Walter Underwood
>> > CM87wj
>> > http://observer.wunderwood.org/ (my blog)
>> > 
>> >> On May 17, 2023, at 8:35 AM, Hank > >> > wrote:
>> >> 
>> >> I went back and re-read you article. I had made a setup for my KX3 a few 
>> >> years back and couldn’t remember all of the details. Thanks for 
>> >> reposting!!
>> >> 
>> >> BTW, Lyle’s article you mention, the link is dead. It was a great 
>> >> resource if you can find it again!
>> >> 
>> >> Thanks,
>> >> Hank
>> >> K4HYJ
>> >> 
>> >> 
>> >>> On May 17, 2023, at 12:07 AM, Walter Underwood > >>> > wrote:
>> >>> The mic bias is +3.3 V on the tip. On the KX3, there is also a logic 
>> >>> level DC voltage on the ring. This is not as clean as the mic bias and 
>> >>> can cause some noise on mics that short those. You can split out those 
>> >>> signals with a TRS plug or a stereo-to-mono splitter. See this blog post 
>> >>> (from me) for details.
>> >>> 
>> >>> https://observer.wunderwood.org/2015/08/16/yamaha-cm500-headset-with-ptt-on-elecraft-kx3/
>> >>> 
>> >>> Phantom power for studio mics is quite different.
>> >>> 
>> >>> wunder
>> >>> K6WRU
>> >>> Walter Underwood
>> >>> CM87wj
>> >>> http://observer.wunderwood.org/ (my blog)
>> >>> 
>>  On May 16, 2023, at 6:40 PM, Alan Geller via Elecraft 
>>  mailto:elecraft@mailman.qth.net>> wrote:
>>  
>>  Is what Elecraft calls mike “bias” in the K3 and K3s Owners handbooks 
>>  Equivalent to the “48 volt ghost voltage” required for condenser mikes 
>>  et al
>>  In the broadcast and music industry ?
>>  
>>  It is mentioned that “mike bias” needs to to be turned on for condenser 
>>  type mikes
>>  But off for dynamic types which is also equivalent for the more common 
>>  Term  “48 volt ghost voltage”
>>  
>>  Thanks for any help
>>  
>>  Alan/K6ADG
>>  __
>>  Elecraft mailing list
>>  Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>  Help: http://mailman.qth.net/mmfaq.htm
>>  Post: mailto:Elecraft@mailman.qth.net 
>>  
>>  This list hosted by: http://www.qsl.net 
>>  Please help support this email list: http://www.qsl.net/donate.html
>>  Message delivered to wun...@wunderwood.org 
>>  
>> >>> 
>> >>> __
>> >>> Elecraft mailing list
>> >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> >>> Help: http://mailman.qth.net/mmfaq.htm
>> >>> Post: mailto:Elecraft@mailman.qth.net 
>> >>> 
>> >>> This list hosted by: http://www.qsl.net 
>> >>> Please help support this email list: http://www.qsl.net/donate.html
>> >>> Message delivered to h...@optilink.us 
>> >> 
>> > 
>> > __
>> > Elecraft mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> > Help: http://mailman.qth.net/mmfaq.htm
>> > Post: mailto:Elecraft@mailman.qth.net 
>> > 
>> > This list hosted by: http://www.qsl.net 

Re: [Elecraft] K2 wanted

2023-05-17 Thread W3AB/GEO

Hmmm, I forgot about the KX line. Also interested.

---
73 de W3AB/GEO
AFA9GB

WA2LSI, KE6RJW, W7B, AAR9AG

On 2023-05-17 15:22, W3AB/GEO wrote:

Hello,

While pretesting for Field Day, and a state park light house
activation next weekend it appears that my 706 seems to have failed. I
though t a K@ might be a nice replacement, if I can afford it.

So, anyone have a K2 they'd like to sell? Please respond directly,
w...@w3ab.org.

---
73 de W3AB/GEO
AFA9GB

WA2LSI, KE6RJW, W7B, AAR9AG

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


[Elecraft] K2 wanted

2023-05-17 Thread W3AB/GEO

Hello,

While pretesting for Field Day, and a state park light house activation 
next weekend it appears that my 706 seems to have failed. I though t a 
K@ might be a nice replacement, if I can afford it.


So, anyone have a K2 they'd like to sell? Please respond directly, 
w...@w3ab.org.


---
73 de W3AB/GEO
AFA9GB

WA2LSI, KE6RJW, W7B, AAR9AG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] Microphone Setup Confusion

2023-05-17 Thread Walter Underwood
Ah, found the original. groups.io  did a really nice job of 
copying over the archives from Yahoo! Groups.

https://elecraft-kx.groups.io/g/main/message/9486
wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)


> On May 17, 2023, at 8:44 AM, Walter Underwood  wrote:
> 
> Thanks, I’ll check the link. Ah, that is a link to the post on Yahoo! Groups, 
> but Yahoo! shut all that down and didn’t even leave the archives live. Sigh. 
> I’ll try and find it elsewhere.
> 
> It looks like I reposted his 2012 post in 2014, so maybe I’ll link to that.
> 
> https://elecraft-kx.groups.io/g/main/message/46148?p=%2C%2C%2C20%2C0%2C0%2C0%3A%3Acreated%2C0%2Ckk7p+mic+bias%2C20%2C2%2C0%2C35006985
> 
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
> 
>> On May 17, 2023, at 8:35 AM, Hank  wrote:
>> 
>> I went back and re-read you article. I had made a setup for my KX3 a few 
>> years back and couldn’t remember all of the details. Thanks for reposting!!
>> 
>> BTW, Lyle’s article you mention, the link is dead. It was a great resource 
>> if you can find it again!
>> 
>> Thanks,
>> Hank
>> K4HYJ
>> 
>> 
>>> On May 17, 2023, at 12:07 AM, Walter Underwood  
>>> wrote:
>>> The mic bias is +3.3 V on the tip. On the KX3, there is also a logic level 
>>> DC voltage on the ring. This is not as clean as the mic bias and can cause 
>>> some noise on mics that short those. You can split out those signals with a 
>>> TRS plug or a stereo-to-mono splitter. See this blog post (from me) for 
>>> details.
>>> 
>>> https://observer.wunderwood.org/2015/08/16/yamaha-cm500-headset-with-ptt-on-elecraft-kx3/
>>> 
>>> Phantom power for studio mics is quite different.
>>> 
>>> wunder
>>> K6WRU
>>> Walter Underwood
>>> CM87wj
>>> http://observer.wunderwood.org/ (my blog)
>>> 
 On May 16, 2023, at 6:40 PM, Alan Geller via Elecraft 
  wrote:
 
 Is what Elecraft calls mike “bias” in the K3 and K3s Owners handbooks 
 Equivalent to the “48 volt ghost voltage” required for condenser mikes et 
 al
 In the broadcast and music industry ?
 
 It is mentioned that “mike bias” needs to to be turned on for condenser 
 type mikes
 But off for dynamic types which is also equivalent for the more common 
 Term  “48 volt ghost voltage”
 
 Thanks for any help
 
 Alan/K6ADG
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to wun...@wunderwood.org
>>> 
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to h...@optilink.us
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wun...@wunderwood.org

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Microphone Setup Confusion

2023-05-17 Thread Walter Underwood
Thanks, I’ll check the link. Ah, that is a link to the post on Yahoo! Groups, 
but Yahoo! shut all that down and didn’t even leave the archives live. Sigh. 
I’ll try and find it elsewhere.

It looks like I reposted his 2012 post in 2014, so maybe I’ll link to that.

https://elecraft-kx.groups.io/g/main/message/46148?p=%2C%2C%2C20%2C0%2C0%2C0%3A%3Acreated%2C0%2Ckk7p+mic+bias%2C20%2C2%2C0%2C35006985

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On May 17, 2023, at 8:35 AM, Hank  wrote:
> 
> I went back and re-read you article. I had made a setup for my KX3 a few 
> years back and couldn’t remember all of the details. Thanks for reposting!!
> 
> BTW, Lyle’s article you mention, the link is dead. It was a great resource if 
> you can find it again!
> 
> Thanks,
> Hank
> K4HYJ
> 
> 
>> On May 17, 2023, at 12:07 AM, Walter Underwood  wrote:
>> The mic bias is +3.3 V on the tip. On the KX3, there is also a logic level 
>> DC voltage on the ring. This is not as clean as the mic bias and can cause 
>> some noise on mics that short those. You can split out those signals with a 
>> TRS plug or a stereo-to-mono splitter. See this blog post (from me) for 
>> details.
>> 
>> https://observer.wunderwood.org/2015/08/16/yamaha-cm500-headset-with-ptt-on-elecraft-kx3/
>> 
>> Phantom power for studio mics is quite different.
>> 
>> wunder
>> K6WRU
>> Walter Underwood
>> CM87wj
>> http://observer.wunderwood.org/ (my blog)
>> 
>>> On May 16, 2023, at 6:40 PM, Alan Geller via Elecraft 
>>>  wrote:
>>> 
>>> Is what Elecraft calls mike “bias” in the K3 and K3s Owners handbooks 
>>> Equivalent to the “48 volt ghost voltage” required for condenser mikes et al
>>> In the broadcast and music industry ?
>>> 
>>> It is mentioned that “mike bias” needs to to be turned on for condenser 
>>> type mikes
>>> But off for dynamic types which is also equivalent for the more common 
>>> Term  “48 volt ghost voltage”
>>> 
>>> Thanks for any help
>>> 
>>> Alan/K6ADG
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to wun...@wunderwood.org
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to h...@optilink.us
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Microphone Setup Confusion

2023-05-17 Thread Hank via Elecraft
I went back and re-read you article. I had made a setup for my KX3 a few years 
back and couldn’t remember all of the details. Thanks for reposting!!

BTW, Lyle’s article you mention, the link is dead. It was a great resource if 
you can find it again!

Thanks,
Hank
K4HYJ


> On May 17, 2023, at 12:07 AM, Walter Underwood  wrote:
> The mic bias is +3.3 V on the tip. On the KX3, there is also a logic level 
> DC voltage on the ring. This is not as clean as the mic bias and can cause 
> some noise on mics that short those. You can split out those signals with a 
> TRS plug or a stereo-to-mono splitter. See this blog post (from me) for 
> details.
> 
> https://observer.wunderwood.org/2015/08/16/yamaha-cm500-headset-with-ptt-on-elecraft-kx3/
> 
> Phantom power for studio mics is quite different.
> 
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
> 
>> On May 16, 2023, at 6:40 PM, Alan Geller via Elecraft 
>>  wrote:
>> 
>> Is what Elecraft calls mike “bias” in the K3 and K3s Owners handbooks 
>> Equivalent to the “48 volt ghost voltage” required for condenser mikes et al
>> In the broadcast and music industry ?
>> 
>> It is mentioned that “mike bias” needs to to be turned on for condenser type 
>> mikes
>> But off for dynamic types which is also equivalent for the more common 
>> Term  “48 volt ghost voltage”
>> 
>> Thanks for any help
>> 
>> Alan/K6ADG
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to wun...@wunderwood.org
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to h...@optilink.us

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] W-2 Cable Length

2023-05-17 Thread Dave (NK7Z)
I am running 4 foot Cat6 cables, for my W2 watt meters, and am having no 
issues.


73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 5/17/23 06:19, Jack Brindle via Elecraft wrote:

A shorter cable would be no problem. I found the stock cables to be too long as 
well and fabricated shorter cables for my W2 test setup.
Going the other way, very long cables could be a problem since the sample 
voltages could degrade on the path, and there could be RF pickup
to cause issues. There really isn’t anything magic about the cable lengths for 
the W2, just don’t use crazy long ones.
Also, even though standard CAT-5, etc cables may be used, the W2 signals are 
not arranged to make use of the twisted pairs in the CAT-5 cables.
Signals that share a wire pair could see cross-talk on long runs. This is 
certainly not an issue for short cables.

73!
Jack, W6FB


On May 17, 2023, at 1:53 AM, J  wrote:

Good Day.  Does the length of the data cable between the W-2 meter and its 
sensor matter?   I would like to use substantially shorter cable than came with 
the kit.  Thanks.   K8JHR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jackbrin...@me.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to d...@nk7z.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] W-2 Cable Length

2023-05-17 Thread Jack Brindle via Elecraft
A shorter cable would be no problem. I found the stock cables to be too long as 
well and fabricated shorter cables for my W2 test setup.
Going the other way, very long cables could be a problem since the sample 
voltages could degrade on the path, and there could be RF pickup
to cause issues. There really isn’t anything magic about the cable lengths for 
the W2, just don’t use crazy long ones.
Also, even though standard CAT-5, etc cables may be used, the W2 signals are 
not arranged to make use of the twisted pairs in the CAT-5 cables.
Signals that share a wire pair could see cross-talk on long runs. This is 
certainly not an issue for short cables.

73!
Jack, W6FB

> On May 17, 2023, at 1:53 AM, J  wrote:
> 
> Good Day.  Does the length of the data cable between the W-2 meter and its 
> sensor matter?   I would like to use substantially shorter cable than came 
> with the kit.  Thanks.   K8JHR
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrin...@me.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KPA500 for sale; delivery at HamVention

2023-05-17 Thread Rus Healy
I am the second owner of a very nice KPA500. I have recently replaced the
finals. The amplifier puts out full power on all bands. I am selling it to
fund some microwave EME purchases.

The amp is wired for 240 V ac but it is easily changed to 120 V without
opening the covers. (New ceramic fuses of the correct rating would be
required.)

Includes power cord and factory packaging. I would prefer to deliver in
person this week at HamVention (Thursday evening through early Sunday), but
I could ship it next week as well.

Price is $2400 firm for in-person delivery, or $2400 plus actual shipping
and insurance costs (domestic US only) for shipping.

PayPal (F&F) or cash. Message me directly at [k2ua at arrl dot net], not to
the list. Thanks.

--73, Rus, K2UA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com