[Elecraft] WTB/trade for K3(S) CW filters
Hi all, Just picked up a K3 w/upgraded S synths, but the op was mostly SSB. I want to pick up some CW filters, preferably matched pairs for main & sub. 500/400/200. Here is the current lineup. Main receiver roofing filters 13 kHz, 6 kHz, 2.70 kHz matched pair, 1.8 kHz, 1.50 kHz Subreceiver roofing filter ,,2.70 kHz matched pair This K3 has the 2m xvtr, so the 13Khz filter was needed for FM. I will likely remove the 13Khz, and the 6Khz, along with the 2m xvtr. If any of you are SSB ops and happened to have acquired a K3 or K3S with all CW filters, I would be glad to swap. Email me offlist with what you have, or what you want to trade. Also looking for a pair of P3 side panels to replace the scratched ones on the P3 that came w/ the package. 73 Darrell AB2E __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] WANTED: K3 or K3S
Looking to purchase a basic K3 or K3S in good condition without the 2nd receiver. Thanks & 73, Dick- K9OM (r...@aol.com) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Grounding and lightning strikes
Another point to remember, many people have been injured and some killed by a non-direct lightning strike. Last year a person was killed and several others injured while taking refuge under a large tree. The tree was the highest point and a huge bolt struck the tree, tearing bark off and travelled through the wet ground to the people. All this energy needs to dissipate and ground is the usual target. With this in mind, during the dry season, it is very important to keep your ground rods wet and the area all around them, use a hose to drip on their location and give them a good deep soaking. Dick W1REJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] A dumb question about lightning
Hi, Everybody, I greatly apologize for escalating the list traffic with my question on lightning. I merely wanted to get your thoughts on disconnecting equipment in addition to grounding and bonding. And the overwhelming consensus-- in both public and private responses-- is that yes, in fact, most people physically disconnect, rather than relying 100% on grounding and bonding to protect their equipment. So I'm going to continue to do so, accepting this practice as necessary in the state where I now live. Keep on reading the books, installing proper grounding, follow the law, and follow good practice. And good luck avoiding a direct hit! Regards, Al W6LX/4 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Buying a K4 in UK
Probably direct from Elecraft. Paul W6PNG/M0SNA www.nomadic.blog > On Aug 1, 2023, at 12:22 PM, Edward wrote: > > What is the best way to buy a K4 from the UK ? W&S still listed as the UK > agent they seem to have lost all interest in selling Elecraft products. > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to paul.ga...@me.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] UDPATED - K3 For Sale (loaded)
WHY UPDATED: Clarification about the KIO3. It is an A revision For Sale - Original owner / non-smoking environment K3 s/n 1193 Includes: 1. KPA3 100w internal amp 2. KIO3A CAT communications, digital I/O control, audio I/O for use with sound cards, dual speaker and headphone jacks, serial CAT, Aux connector 3. KXV3 RF I/O, RX antenna, XVTR connections, IF out 4. KAT3 ATU, AUX antenna input 5. KRX3 Sub Receiver (able to fully use Diversity RX) 6. KSYN3A (K3S) upgraded synthesizers in both main and sub 7. Roofing Filters a. Main: 2.7khz, 400hz, 250hz b. Sub: 2.7khz, 400hz 8. The following modifications / enhancements have also been installed a. Front panel Microphone Circuit Modification b. KI03 rev C upgrade (see above), K3IOBUFFKT c. 12VDC OUT current mod, KPA3 12V Sense Mod d. K3 VFO Tuning Noise Reduction e. IF Output Buffer Gain Modification f. DSP upgrade g. Audio Output Chip Protection Mod, K3 AF Output Mod Kit h. AF Stage Upgrade, Line Out and Speaker Amp i. CW Keying rise time mod, CWRTMDKT j. KRX3 Sub out connector, not installed / not needed but info and parts supplied k. KPA3 Power Connector Replacement - Gold Pin mod 9. All K3 and Option manuals as well as modification documentation 10. (4) Spare set of knobs for AF gain / RF gain 11. Spare B VFO tuning knob 12. Spare SO-239 with attached plug (plugs into KAT3) 13. Spare KI03A module set OTHER: 14. Small top cover scratch by middle rear screw about .25 inches long. (Pictures available on request) 15. Slight crack in VFO B knob repaired by Elecraft when in California for Gold Pin mod. (does not impact operation) a. NOTE: A spare knob will be supplied (also slight crack and also repaired by Elecraft) 16. Latest revision firmware installed (MCU = 5.67, FPF = 1.26, DSP1 = 2.88, DSP2 = 2.88) Asking $2500.00 - - Includes insured UPS ground shipping to CONUS destinations. 73, Bruce - N1LN_._,_._,_ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Buying a K4 in UK
What is the best way to buy a K4 from the UK ? W&S still listed as the UK agent they seem to have lost all interest in selling Elecraft products. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com