[Elecraft] Fwd: Elecraft K2 serial number 7699
Hi, I received a replacement variable inductor (L30) from Elecraft, very speedy delivery. The original was definitely faulty, the replacement now allows me to alter the voltage at R30 but not getting the required 6 volts, only get to 4.6 volts. Any ideas? Regards Allan ; Begin forwarded message: From: Allan Forster Date: 25 September 2023 at 14:21:18 BST To: elecraft@mailman.qth.net Subject: [Elecraft] Elecraft K2 serial number 7699 Sorry, made a mistake and used the wrong frequency while attempting to set up the VXO. Now the voltage at R30 is 4.3volts and does not change when adjusting L30. Previous post ‘ I have got to the VCO alignment stage of aligning my K2. I have got 7.4 volts on R30, this does not change when turning the core in L30. The core moves but does not appear to move up or down so I suspect that the VCO inductor is damaged. Does anyone know where I can get a replacement?’ Regards Allan G4NNJ __ Elecraft mailing list Home: https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraft&data=05%7C01%7C%7Cadd72e9782be4ade2e1408dbbdca4cbe%7C84df9e7fe9f640afb435%7C1%7C0%7C638312448782252635%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=xmAys0mDSrK4qKBnrJ0WeQPBuS01HmVV3vb8Zd6OORk%3D&reserved=0 Help: https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmmfaq.htm&data=05%7C01%7C%7Cadd72e9782be4ade2e1408dbbdca4cbe%7C84df9e7fe9f640afb435%7C1%7C0%7C638312448782408859%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=wzuDah%2B6IqOj9wFzDzDBjLR%2F8YlW5dAVYczgkTg464M%3D&reserved=0 Post: mailto:Elecraft@mailman.qth.net This list hosted by: https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2F&data=05%7C01%7C%7Cadd72e9782be4ade2e1408dbbdca4cbe%7C84df9e7fe9f640afb435%7C1%7C0%7C638312448782408859%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=mF8Y8xuGruCgH0I00JKFFNYUbE5xBvyrVmAPuMr8Dr0%3D&reserved=0 Please help support this email list: https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdonate.html&data=05%7C01%7C%7Cadd72e9782be4ade2e1408dbbdca4cbe%7C84df9e7fe9f640afb435%7C1%7C0%7C638312448782408859%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=skT7PjKEkf6Kjll6uPHbx6WZmeEAdj0vPfJduGTCH9g%3D&reserved=0 Message delivered to allanforster1...@outlook.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft K2 serial number 7699
Sorry, made a mistake and used the wrong frequency while attempting to set up the VXO. Now the voltage at R30 is 4.3volts and does not change when adjusting L30. Previous post ‘ I have got to the VCO alignment stage of aligning my K2. I have got 7.4 volts on R30, this does not change when turning the core in L30. The core moves but does not appear to move up or down so I suspect that the VCO inductor is damaged. Does anyone know where I can get a replacement?’ Regards Allan G4NNJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft K2 serial number 7699
Hi, I have got to the VCO alignment stage of aligning my K2. I have got 7.4 volts on R30, this does not change when turning the core in L30. The core moves but does not appear to move up or down so I suspect that the VCO inductor is damaged. Does anyone know where I can get a replacement? Regards Allan G4NNJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K2/10
Hi, Thanks to everyone that sent suggestions regarding my broken K2/10. I tried all suggestions but still broken, I did find that the frequency probe was broken though. The probe is now fixed and have been able to go through the alignment steps from the manual. I got as far as the VCO alignment step. I was not able to get the 6 volts on R30. Adjusting the slug in L30 only resulted in a range of approx. 2.5 – 4.5 volts. To recap the events that led to the failure, the transceiver was working fine until I noticed that the power out on my external watt meter was about 50% higher than I set the power to. I was in the process of calibrating the internal ATU when the power cut out and left the K2 in this state. Any suggestions? Is there a service and repair facility for Elecraft rigs in the UK? Thanks Allan, G4NNJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K2/10 problem
Hi, I found that the actual power out did not match my setting, eg. I set 10 watts but power meter reads 14 Watts. Simple to calibrate the auto ATU or so I thought. While adjusting the 2 pots on the ATU the rig suddenly powered down. When I switched it back on the RX was not working, I followed the alignment procedure and it seems that the BFO is dead. Ie. In CAL FIL the BFO reading is all zeroes Any ideas? Regards Allan G4NNJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K2/10
Hi, I have recently acquired an Elecraft K2/10, it is an early model, serial Nr. 00739. I am looking for a manual specific to that early model or at least the re-alignment instructions. The transceiver is in very good condition but appears a little deaf. I have the following options fitted. SSB board Noise blanker 160M/ receive antenna ATU Any help would be greatly appreciated Thanks in advance Allan G4NNJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
