Re: [Elecraft] K3 and MixW PSK31
You Should give Glenn a call at US Interface, as he was the best MixW distributer around. He has helped me get my K3 set up with MixW and his interface as well as the RigExpert interface. Just go to his website and get his number. He is a great guy. Craig K6ML Gary Gregory-3 wrote: Thanks for the replies and settings etc. All to no avail sadly. The K3 will work on CW but stubbornly refuses to TX on DATA A either RTTY or PSK31. This was a factory built unit and if I was located near Aptos it would be on it's way back to be checked out fully, sadly I live a little ways beyond California. Oh well, who wants to play with a computer when you can find a human to converse with...so no more data stuff for me, life is way too short to waste time playing with 4 data programs that simply don't work with this particular K3. Regards, Gary I just got lost in thought. It was unfamiliar territory ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://n2.nabble.com/K3-and-MixW-PSK31-tp1637540p1641358.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 and MixW PSK31
He also has a GREAT interface. I am using it now. Craig K6ML Gary Gregory-3 wrote: Thanks for the replies and settings etc. All to no avail sadly. The K3 will work on CW but stubbornly refuses to TX on DATA A either RTTY or PSK31. This was a factory built unit and if I was located near Aptos it would be on it's way back to be checked out fully, sadly I live a little ways beyond California. Oh well, who wants to play with a computer when you can find a human to converse with...so no more data stuff for me, life is way too short to waste time playing with 4 data programs that simply don't work with this particular K3. Regards, Gary I just got lost in thought. It was unfamiliar territory ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://n2.nabble.com/K3-and-MixW-PSK31-tp1637540p1641366.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [K3] [Elecraft] K3 power tripping out
I have had this happen to me, mkae sure the power connector plugged in fully. The type that is used by Elecraft tends to not stay plugged in completely, as the wire is pretty stiff it tends to pull out sometimes. Craig K6ML G4AFU Paul wrote: For some unknown reason my K3 (897) tripped out 3 times last night when on 160m cw. I was running 90w out with a 1 to 1 swr - auto ATU installed. Each time I brought it back to life by hitting the POWER button. It is a little disconcerting when in mid QSO! Has anyone else had this happen to them? 73 de Paul G4AFU -- View this message in context: http://n2.nabble.com/K3-power-tripping-out-tp1613501p1613765.html Sent from the [K3] mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Got My Katie-gram today and can not afford it now.
Gone! -- View this message in context: http://n2.nabble.com/Got-My-Katie-gram-today-and-can-not-afford-it-now.-tp736901p741105.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Got My Katie-gram today and can not afford it now.
If anyone is interested purchaseing this rig, contact me directly. I believe that I can assign it to who ever wants to purchase it. It is a KIT that is a K3-100, ATU, 250 400 Hz filters, KXV3, USB, Heil Headset, with theKDVR3 backordered and KRX3 backordered. Craig K6ML 719-661-5695 -- View this message in context: http://n2.nabble.com/Got-My-Katie-gram-today-and-can-not-afford-it-now.-tp736901p736901.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] DM 780 and K3
Try just using USB and not data mode A. I have used HRD and DM 780 that way and it works Craig Jim Stafford-3 wrote: Ok, I think 24 hours and searching every last manual, option, etc in both the HRD - DM780 and K3 is long enough before asking for help! That said, I will probably find the solution about 5 minutes after hitting the SEND button on this message. I have done PSK31 with other rigs and have gotten some results with the K3 (no contacts but it appeared to send the characters) but that was using the BPSK31 setting in the K3. I want to use the DATA A mode which I think I should be using with the external sound card in my computer. Everything seems to be connected - DM780 is working with HRD, etc. I see data streams and all is receiving ok. I load the buffer and it seems to send ok. In fact the transmit light on the K3 lights up but nothing gets sent. It is NOT in the TX TEST mode but it acts that way. The stream gets sent but no power out. I can't seem to get the VOX to work and the PTT is some sort of VIA Ham Radio Deluxe method. I thought I could use the DTR or RTS method but even though I have the PTT set to that in the K3 and DM780, nothing happens on that method except DM780 does seem to be sending the data. That method doesn't even put the K3 into the TX mode. All my wires are connected correctly and I print stations fine. The transmitted signal in the waterfall appears to have data on it, ie when the characters are finished, there is a steady out put with no modulation. I've run thru HRD's forums, this reflector, the Yahoo Group, and googled the web. Nothing. Here are my K3 settings: VOX ON VOX GN 50 AntiVOX 0 PTT - KEY RTS-OFF or any combination (tried'em all) MIC BTN OFF (but ON does not work either) MIC + LIN ON MIC SEL RPL (rear panel) on DM-780 Connected to HRD I have a TX button set but it only puts the rig into the TX mode (no power out) PTT - none of the 3 options work Shouldn't the cable I'm using between HRD and rig work to put PTT on the line? And why won't VOX work? I've used both methods on other radios with various interfaces. I'd think I have a bad serial cable but a friend has tried all the same options in sync with me and neither get anything out UNLESS we put the K3 into the PSK31 mode and not DATA A. There seems to be a lot more flexibility in DATA A with respect to filter and shifting than in PSK31. Ok, I'll be back in about 5 minutes with the answer. IT always seems to work that way. 73, jim/w4qo ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://n2.nabble.com/DM-780-and-K3-tp684281p705371.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 RigExpert SD - MixW
Has any one had any experiance with this setup and quirks getting it to work. I am expecting my new K3 Monday and want to be ready to get it going on Digital Craig KAØCT -- View this message in context: http://n2.nabble.com/K3---RigExpert-SD---MixW-tp547935p547935.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft service and USINTERFACE
I do not know if you have Gelnn's phone number, but it is 410-272-9110. I purchased an interface cable from him at Dayton for the K3 and also purchased a RigExpert SD from him two years ago and have always received great service and call backs within 24 hours and even on weekends when I called, ih his defence. Craig KA0CT Robert Allbright wrote: I ordered a KK7uq IMD meter from USINTERFACE several weeks ago Paypal made the payment on 12th June but I have not received the 'thing' yet. I have emailed Glenn W3GWW @ usinterface.com several times without getting a reply. I'm contrasting this very poor service with the superb service / response I always get from Elecraft + recently Microham. I'm just wondering if USINTERFACE are on holiday? 73 Rob G3RCE Yahweh, what is man, that you should notice him? A human being, that you should think about him? Man's life, a mere puff of wind, his days, as fugitive as shadows. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://www.nabble.com/Elecraft-service-and-USINTERFACE-tp18247633p18260139.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Filter Question?
Why woould you swap out the 2.7 ilter for the 2.8 filter. What do you acheive with the switck -- View this message in context: http://www.nabble.com/K3-Filter-Question--tp18131895p18131895.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
