Re: [Elecraft] Auto-Notch Broken in 3.25 (I probably missed this)
FWIW: Auto Notch working fine here, even after loading 3.25. Dave, NX7F -Original Message- From: Dick Roth, KA1OZ [mailto:raro...@comcast.net] Sent: Sunday, August 16, 2009 12:22 To: Elecraft Reflector Subject: [Elecraft] Auto-Notch Broken in 3.25 (I probably missed this) Tried listening for the Elecraft SSB net at 1800. There was a heterodyne or other interfering signal on 14.316. I tried to use Auto-Notch, but nothing changed. Then I went to manual and notched it out completely. Hope I'm not adding too much noise to the FW discussion! -- 73, Dick ka1oz Middleborough, MA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K144XV 2M Module and W2 Wattmeter on Web Order Form
Can I get one of these "1200 watt" K3s??? ;-) -Original Message- From: Lyle Johnson [mailto:k...@wavecable.com] Sent: Wednesday, May 27, 2009 1:48 PM To: John Frerichs Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K144XV 2M Module and W2 Wattmeter on Web Order Form The K144XV adds a BNC connector for the 2 meter antenna. 10 watt and 1200 watt K3s have a different rear panel plate. 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] FSK Issue
I seem to have this recurring problem with FSK on my K3. Up until now, the problem was intermittent, often solved by rebooting my computer and/or reloading MMTTY. Well, without changing anything, the problem has now become consistent, persistent and predictable: At 0 - 22W on 80m, or any power level on 6m - 40m, MMTTY (using my interface) will key the K3 and send normal RTTY tones using the FSK-D data mode. At 23W and above, on 80m, MMTTY will key the K3, but I only get the high tone. Of course, if I put the radio into test mode, I get normal RTTY tones. Am I overlooking something obvious? Going crazy? SWR presented to the K3 is 1:1 (SteppIR BigIR vertical). AFSK works fine using the AFSK-A data mode, but I don't want to use AFSK. :-) 73, Dave, NX7F __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] 2nd receiver only delivers hiss
Assuming you do not have a separate Rx antenna, you need to select the main antenna for the sub receiver. With the sub rcvr on, press and hold RX ANT until MAIN appears. 73, Dave, NX7F -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Greenbaum Sent: Tuesday, February 17, 2009 9:09 PM To: elecraft@mailman.qth.net Subject: [Elecraft] 2nd receiver only delivers hiss Well I decided to chase the K5D tonight (always better to start late). Lo and behold, my sub receiver does not copy anything. I've checked the menu and the KXV3 is set to NOR, speakers set to 1 or 2 makes no difference on internal speaker, RF set to max, SUB is turned on. It transmits fine on B and in fact I've now worked K5D on 40 80 and 160. But it would be nice to hear the 2nd RX to find the last stn working them. What am I doing wrong? AFX on or off makes no difference either by the way. Don - N1DG--Licensed since 1962 EX-WB2DND, A61AD (GUEST OP, QSL MGR), A52DG, /KH9, /BV, /VS6, /4X, /9V Pilot: VU7RG, 3Y0X, VK9ML, D68C, VK0IR, K8XP/KH9, 9M0C, ZK1XXP, ZL9CI Webmaster: BS7H, 3Y0X, K5K, A52A, VK0IR, 9M0C, ZK1XXP, WB2DND/KH9, BQ9P, ZL9CI QSL Manager: A61AD, A61AO, A61X, A61AQ 2006 inductee into the CQ Magazine DX Hall of Fame Member: FOC, ARRL, DDXA, YCCC SKYPE: aurumtel Please consider the environment before printing this email __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
