Thanks Don for the info? I was looking for a way to do that. I have 1.02 so
I am good. I can now install the board and not worry about the firmware.
73,
Don KB3DRW
> On May 13, 2017, at 1:30 PM, Don Wilhelm wrote:
>
> Don,
>
> It is likely that your firmware is current.
>
> You need firmware 1.02 for the KXB3080 option. You can easily check what is
> installed in your KX1 - hold any button while powering on and the firmware
> level will be briefly displayed. There are only 2 versions for the KX1 -
> 1.01 and 1.02.
>
> If you have 1.01, then request the firmware from Elecraft - since you are
> adding an option which requires it, the firmware IC should be provided at no
> cost.
>
> 73,
> Don W3FPR
>
>> On 5/13/2017 1:02 PM, Donnie Hill wrote:
>> I am about to add a 30 80 board to my KX1 which currently only has 20 and 40
>> meters. The serial number of my unit is 25xx. It seems from reading the
>> Elecraft site I will not have to change the firmware chip with a serial
>> number as late as mine. Is that correct?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
