Re: [Elecraft] Crystal Filter Offset in 4.81, What does it mean?
It does effect what CW skimmer sees. At least it does here. I have to set .1 to get skimmer to decode. 73 Doug N3QW "Wes (N7WS)" wrote: >Already noted. See the footnote here: >http://elecraft.365791.n2.nabble.com/Ref-Osc-Cal-Method-4-tc2595451.html > >On 2/5/2014 8:35 AM, Lyle Johnson wrote: >> >> "Zero beat" has to do with frequencies, not filter responses, and >changing the >> filter edge should have no practical effect on whether or not you are >zero >> beat. I say practical because the calculations done inside the radio >coupled >> with finite resolution of the various oscillators may result in a 1 >or 2 Hz >> difference, and _someone is bound to measure this :-) _ >> >> >> 73, >> >> Lyle KK7P > >__ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 and the ARRL DX 'test
John you can add a QSK-5 from Ameritron to your existing amp. Works great with my AL-80B 73 Doug N3QW -Original Message- From: John Harper Sent: Sunday, February 20, 2011 5:40 PM To: Elecraft Subject: [Elecraft] K3 and the ARRL DX 'test I gotta say, the K3 has made a contester out of me. I've been a ham since '78 and avoided contests like the plague for over 3 decades - too much "mush"...inseparable stations, endless noise, etc - who needs the fatigue?! But November's CQWW and this weekend's ARRL DX contests have been pure fun for me. I started out sticking my toe in the water during 1 or 2 smaller contests, then bought the K3 just under a year ago. Man, what a difference. I now see the attraction - and the addiction. This was also the first time I've ever operated QRO (AL-811). A fly in the ointment had me back at 100 watts for a while and, while I missed the power level, I was back to QSK. I wish there was an amp that offered 500 watts *and* QSK - I hear there may be one coming soon...! I'm in the market. John AE5X http://www.ae5x.com/blog __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] spectrogram
Try here http://www.electronics-lab.com/downloads/pc/003/index.html 73 Doug N3QW -Original Message- From: John Cooper Sent: Wednesday, December 29, 2010 10:47 AM To: elecraft@mailman.qth.net Subject: [Elecraft] spectrogram where can i find this software? tried googling it but apparently the company that made it went out of buiseness. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Key Clicks
If you’re a ARRL member you can see a scope output in the K3 review on line. They called it out standing. 73 Doug N3QW -Original Message- From: Corboy - Poteet Sent: Friday, December 03, 2010 3:19 PM To: Elecraft reflector Subject: [Elecraft] [K3] Key Clicks OK, this has been bashed about pretty good. So my question is: if someone puts a spectrum analyzer on the CW output of a K3, are key clicks detectable? On make, on break? Close in, far out, in between? If they exist, what is the level of the click relative to the signal? If they exist, are the clicks really a problem? I've not heard any K3 with detectable clicks (but I haven't been trying to find them either). Mike W5FTD > > On Dec 3, 2010, at 11:06 AM, Jan Erik Holm wrote: > >> Yes 99% of all CW stations clicks at the "break" side. >> > That makes perfect sense, Jan. > > If they are using simple IIR filters, the slope discontinuity is > worse at the onset of switching than when it is at the end of the > leading edge or trailing edge (visualize the RC constant diagrams > that we learn in school :-). > > Now, the onset of switching states happens to occur at low power > (zero power) on the rising edge of a CW pulse, so even if it is > dirty, you are not putting out energy. But it the worst part of an > RC filter occurs at the highest power location at the trailing edge > of a CW pulse. > > If the click spectra is mostly coming from slope discontinuities, > the energy from the clicks are going to be much greater when the > key is breaking than when the key is making. > > This is why a couple of us has said that it is not the "rise time" > (or fall time) that is important, it is the n-th order > discontinuities (slope discontinuity contributes more than higher > order ones obviously, when you look at it as a Fourier series). > > Someone else can probably explain better than I can. I can't do it > without using equations. English is my third language :-). > > 73 > Chen, W7AY OK, this has been bashed __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] FM Filter for AM?
-- From: "Wayne Burdick" Sent: Saturday, October 09, 2010 10:54 AM To: "Bob Naumann" Cc: Subject: Re: [Elecraft] FM Filter for AM? > Bob Naumann wrote: > >> Wayne, >> >> Am I correct in my understanding that the reason the 2.1 is not >> currently >> allowed is simply a firmware issue? > > Yes. As usual we have a long list of customer requests that we're > working on. OOO OOO Yeeess > This is one of them (along with allowing the FM filter to > be used for AM TX). > > >> I was surprised that after removing the 2.7 and installing the 2.1 >> that its >> selection as a transmit filter was precluded. > > I believe the owner's manual and assembly manual both state that you > need either a 2.7 or 2.8 kHz filter installed. But we many need to > further clarify this. > > 73, > Wayne > N6KR > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Need: K-3 to Quadra band data cable
See www.n0ss.net 73 Doug N3QW - Original Message - From: To: Sent: Sunday, November 01, 2009 8:24 PM Subject: [Elecraft] Need: K-3 to Quadra band data cable > Hi Guys, > > Would anyone have a K-3 to Quadra band data cable you would be willing to > part with? > > 73, > > Dick- K9OM > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Noise Clicks...still!
Hi Tom, Yes, after saying I did not hear them I just this moment did hear them in my out board speaker. Looks like a CW sig needs to be present before I hear them, but they are very prominent 73 Doug N3QW - Original Message - From: "tom_k1tl" To: "Doug Alspaugh" Sent: Sunday, November 01, 2009 9:17 AM Subject: RE: [Elecraft] [K3] Noise Clicks...still! > Hi Doug, > > Seems that I did not have this b4 the 3.44fw update and since then I have > been hearing the "clix" in the headset...almost sounds like "key clix." > > It might also be that I have a bad decoder pot as one signal did change > freq > while I was tuning thru the steps. It did not show up on the freq display > of > the K3 tho. > > I sure hope that it is not the encoder piece as the fp is a pain in the > a** > to put back together due to the LED's not lining up properly at times. I > have no problem doing the pc work as I am all equipped here in the shack > for > that kind of stuff. > > 73 > Tom/k1tl... > > -Original Message- > From: Doug Alspaugh [mailto:dalspa...@comcast.net] > Sent: Sunday, November 01, 2009 9:02 AM > To: tom_k1tl; elecraft@mailman.qth.net > Subject: Re: [Elecraft] [K3] Noise Clicks...still! > > > Could you just be hearing the width steps. That is all I hear here. > > > 73 Doug N3QW > > > - Original Message - > From: "tom_k1tl" > To: > Sent: Sunday, November 01, 2009 8:45 AM > Subject: [Elecraft] [K3] Noise Clicks...still! > > >> Hi Gang, >> >> Had problem with "noise clicks" while using the width control before this >> latest fw upgrade. I thought that this was supposed to be addressed with >> the >> latest fw. I have 3.52 installed and still have clicks in the headphones >> when adjusting the width control. I thought it might be caused by some >> of >> the stations that were loud, due to the close proximity of the signals >> but >> did not have this before 3.44 fw. >> >> Has anybody else have similar problems with this "artifact"? >> >> 73 >> Tom/k1tl... >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Noise Clicks...still!
Could you just be hearing the width steps. That is all I hear here. 73 Doug N3QW - Original Message - From: "tom_k1tl" To: Sent: Sunday, November 01, 2009 8:45 AM Subject: [Elecraft] [K3] Noise Clicks...still! > Hi Gang, > > Had problem with "noise clicks" while using the width control before this > latest fw upgrade. I thought that this was supposed to be addressed with > the > latest fw. I have 3.52 installed and still have clicks in the headphones > when adjusting the width control. I thought it might be caused by some of > the stations that were loud, due to the close proximity of the signals but > did not have this before 3.44 fw. > > Has anybody else have similar problems with this "artifact"? > > 73 > Tom/k1tl... > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta firmware rev. 2.82
Hi Steve, Seems to work correctly here even if I exceed the recommended 5 bars of ALC. 73 Doug N3QW - Original Message - From: To: Sent: Wednesday, February 11, 2009 9:16 AM Subject: Re: [Elecraft] K3 Beta firmware rev. 2.82 > > I installed the new beta last and tested the new output power control. I > don't see any improvement in PSK31 output power using DATA A mode. I still > get nearly twice the output power than I have dialed in by the PWR knob. > In > the previous firmware, the measure output power in CW modes agreed with > the > PWR knob setting, but now the power output in CW is 20-30% higher than the > setting. > > I will try to redo the transmitter gain calibration to see if this helps. > > Steve N9SZ > K3 #1672 > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Overdrive using RTTY
Lyle, With the current (276/198) I am not able to adjust the sound card input for a clean signal no matter how low I set the drive. I get the clicking sound in the monitor output and if I listen on a second rig I can hear clicking by tuning just off freq. I also tried 273/198 and got the same results. However I can get a clean output using 267/196. Takes very careful adjustment. I get one solid bar and one flickering bar on the ALC meter. One more click of input from the sound card and the clicking starts. With the proper adjustment the output sonds clean on my second radio. 73 Doug N3QW___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Beta firmware rev. 2.63: Switch-press tones
After upgrading I set to AM mode on 20 mtrs. At first the carrier went only to 20 watts. When I modulated I got about 75 watts voice peaks. The more I modulated the higher the carrier got till it went up to 35 watts and the modulated carrier peaked at 100 watts. Turning the rig off resets the power out to 20 watts and modulating it a few times returns to full power. Strange behavior for sure. 73 Doug N3QW - Original Message - From: "Joe Subich, W4TV" <[EMAIL PROTECTED]> To: "'wayne burdick'" <[EMAIL PROTECTED]>; "'Elecraft Reflector'" Sent: Tuesday, November 04, 2008 11:53 PM Subject: RE: [Elecraft] K3 Beta firmware rev. 2.63: Switch-press tones * AM TRANSMIT: CONFIG:TXG VCE no longer affects AM transmit. Is there now going to be a new AM carrier adjustment? With TXG VCE "lost" on AM, my carrier output is well below what it should be (and was with TXG VCE = 1.0 or 1.5 depending on the which K3 I was using). With previous firmware the same value of TXG VCE that equalized the SSB PEP output with CW resulted in 22 to 28 watts of AM carrier when the power level was set for 100 watts. With TXG VCE disabled in FW 2.64, I now get only 14 to 15 Watts of carrier. 73, ... Joe, W4TV -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of wayne burdick Sent: Tuesday, November 04, 2008 8:52 PM To: Elecraft Reflector Subject: [Elecraft] K3 Beta firmware rev. 2.63: Switch-press tones K3 beta-test firmware revision 2.63 (with DSP rev 1.95) is now available. Please send any problem reports to [EMAIL PROTECTED] For instructions on how to load beta firmware, please see: http://www.elecraft.com/K3/k3_software.htm Highlights: * Audio tones on switch press (if CONFIG:SW TONE is set to ON) * 1 kHz AM COARSE VFO TUNING RANGE ADDED * Many new remote-control commands for use by PC software applications Full details appear below. 73, Wayne N6KR * * * MCU 2.63 / DSP 1.95, 11-04-2008 * SWITCH TONES NOW AVAILABLE: If CONFIG:SW TONE is set to ON, tapping or holding switches produces audio tones corresponding to the switch state. This supplements the normal tactile feedback of the switches. * NORM SWITCH ALLOWED DURING TX: The “NORM” switch function (receive passband normalization, e.g. 400 Hz in CW mode) can now be accessed during transmit. It takes effect after the K3 returns to receive mode. This is especially useful for CW contest operation. * COMPRESSION RANGE: Some operators asked for a higher “CMP” (speech compression) setting to add “punch” under certain conditions. It can now be set from 0-40. We still recommend lower settings (0-20) for normal operation. * AM COARSE VFO TUNING RATES: Now 1, 5, 9, and 10 kHz. * AM TRANSMIT: CONFIG:TXG VCE no longer affects AM transmit. * SPLIT COMBINATIONS AVAILABLE: Cross-mode SPLIT operation is possible with any combination of CW and SSB for VFO A and B. Same-mode SPLIT is possible in all modes except PSK-D. * CROSS-MODE SPLIT INDICATION: If you turn on SPLIT with VFO A and B in different legal modes (e.g. CW and SSB), the K3 will remind you of VFO B’s mode by flashing it (as well as the VFO B TX arrow). This reminder can be cancelled by tapping any switch, key, or PTT. The reason for the “reminder” is that operators usually enter cross-mode split by accident. If so, cancel the reminder flash, then use BSET to change VFO B’s mode, or tap A>B to copy mode A to mode B. For software developers: * “FW$” ADDED (direct sub/VFO B filter bandwidth). * “SM$” ADDED (direct sub-receiver S-meter read). * "DV" (DIVERSITY) COMMAND: DV0 (off), DV1 (on). Also turns sub off/on. To turn on the sub but not diversity, use an “SWT” command (verify SUB status with “DS”). * COMMANDS AVAILBLE DURING BSET: "IF", "FA", "FB", "MD”, “MD$", and "DT" (GET only). “FW” and “FW$” work in BSET except during diversity (TBD). --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Meter - MUCH improved
Now your cookin. 73 Doug N3QW - Original Message - From: "David Fleming" <[EMAIL PROTECTED]> To: Sent: Sunday, November 02, 2008 7:17 PM Subject: [Elecraft] K3 Meter - MUCH improved I've implemented a moving average algorithm that adds a tremendous amount of realism to the meter. HUGE difference. Also converted to the SM; command to avoid truncation with CWT enabled. Big thanks to Joe Subich for his help with the moving average code. http://sight.net/K3Meter Where did the weekend go? David, W4SMT --- On Sun, 11/2/08, Joe Subich, W4TV <[EMAIL PROTECTED]> wrote: From: Joe Subich, W4TV <[EMAIL PROTECTED]> Subject: RE: [Elecraft] So you want an analog s-meter for the K3? To: [EMAIL PROTECTED], elecraft@mailman.qth.net Date: Sunday, November 2, 2008, 12:52 AM David, I'd suggest some averaging ... perhaps five or 10 sample log weighted moving average ... and recommend converting from BG; to SM; polling since the BG; scale is truncated if CWT is selected in CW or data modes. 73, ... Joe, W4TV > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of David Fleming > Sent: Sunday, November 02, 2008 12:10 AM > To: elecraft@mailman.qth.net > Subject: [Elecraft] So you want an analog s-meter for the K3? > > > Here you go... > > http:/sight.net/K3Meter > > And there's a Windows version too! :) > > Enjoy! > > David, W4SMT > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Correct Link..
Runs good thanks. 73 Doug N3QW - Original Message - From: "David Fleming" <[EMAIL PROTECTED]> To: Sent: Saturday, November 01, 2008 11:13 PM Subject: [Elecraft] Correct Link.. Sorry. Here's the correct link.. http://sight.net/K3Meter David, W4SMT ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Upgrade HRD to the latest and see if it is OK then? I am working fine with an early version too. 73 Doug N3QW - Original Message - From: "Bob Serwy" <[EMAIL PROTECTED]> To: "'Doug Alspaugh'" <[EMAIL PROTECTED]>; Sent: Monday, October 06, 2008 7:50 AM Subject: RE: [Elecraft] K3 HRD lastest beta not working with LP-Bride I am using K3 with firmware DSP 1.92 and MCU 2.46 (latest firmware). I am also using LP-Bridge v0.9.82. Everything is working fine here. Bob Serwy - N9RS -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Alspaugh Sent: Monday, October 06, 2008 4:36 AM To: Simon (HB9DRV) Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride Simon, Not working here yet. 73 Doug N3QW - Original Message - From: "Simon (HB9DRV)" <[EMAIL PROTECTED]> To: "Larry Phipps" <[EMAIL PROTECTED]>; Sent: Monday, October 06, 2008 12:41 AM Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride Hi Larry, Here's 1989 - http://mannindustries.net/hrd/public/betas/041/HRDv041b1989_Full.exe This implements everything available in Wayne's CAT support, as the radio stays in K31 all the time I hope your bridge is no longer broken - let's see. Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: "Simon (HB9DRV)" <[EMAIL PROTECTED]> New kit in about 30 minutes, I'll be in K31 mode all the time (as pre-1988) with the exception of the FW command where I'll send K30,FW;K31;. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Simon, Not working here yet. 73 Doug N3QW - Original Message - From: "Simon (HB9DRV)" <[EMAIL PROTECTED]> To: "Larry Phipps" <[EMAIL PROTECTED]>; Sent: Monday, October 06, 2008 12:41 AM Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride Hi Larry, Here's 1989 - http://mannindustries.net/hrd/public/betas/041/HRDv041b1989_Full.exe This implements everything available in Wayne's CAT support, as the radio stays in K31 all the time I hope your bridge is no longer broken - let's see. Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: "Simon (HB9DRV)" <[EMAIL PROTECTED]> New kit in about 30 minutes, I'll be in K31 mode all the time (as pre-1988) with the exception of the FW command where I'll send K30,FW;K31;. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Hi Mike, I don't see much, if any activity from HRD when I monitor the Virtual port. To bad some nice new features added. I am sure Simon will fix it. 73 Doug N3QW - Original Message - From: Mike Stevenso To: Doug Alspaugh Sent: Sunday, October 05, 2008 10:27 AM Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride Hi Doug I am seeing the same problem with latest beta of HRD. LP-Bridge is not passing the new software commands. Mike G8ALS - Original Message - From: Doug Alspaugh To: elecraft@mailman.qth.net Sent: Sunday, October 05, 2008 3:07 PM Subject: [Elecraft] K3 HRD lastest beta not working with LP-Bride Using HRD beta 1988 I have no comms with LP-Bridge. Reverting back to 1959 fixes the problem. Tried reinstalling with no luck. Anyone else try it? 1988 works fine with K3 if I connect direct, without LP-Bridge The virtual port on LP-Bridge shows very little action from HRD. 73 Doug N3QW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.173 / Virus Database: 270.7.6/1709 - Release Date: 05/10/2008 09:20 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 HRD lastest beta not working with LP-Bride
Using HRD beta 1988 I have no comms with LP-Bridge. Reverting back to 1959 fixes the problem. Tried reinstalling with no luck. Anyone else try it? 1988 works fine with K3 if I connect direct, without LP-Bridge The virtual port on LP-Bridge shows very little action from HRD. 73 Doug N3QW___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 KatieGram Received
Bill, Yes, no second receiver 73 Doug N3QW - Original Message - From: "Bill Johnson" <[EMAIL PROTECTED]> To: "'Doug Alspaugh'" <[EMAIL PROTECTED]> Sent: Tuesday, July 29, 2008 11:57 Subject: RE: [Elecraft] K3 KatieGram Received Doug, Did you order without 2nd receiver? 72, Bill K9YEQ K2 #35, K2 # 5279, KX1 #35, Mini Modules, etc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Alspaugh Sent: Tuesday, July 29, 2008 10:45 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 KatieGram Received Ordered March 18th this year. Just got the Katie Gram. Says about three weeks to ship. I order factory assembled 73 Doug N3QW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 KatieGram Received
Ordered March 18th this year. Just got the Katie Gram. Says about three weeks to ship. I order factory assembled 73 Doug N3QW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 "operating scripts" to help first-time users
Since I am struggling with the current format that sounds great to me 73 Doug N3QW - Original Message - From: "wayne burdick" <[EMAIL PROTECTED]> To: "Elecraft Reflector" Sent: Saturday, June 28, 2008 11:47 Subject: [Elecraft] K3 "operating scripts" to help first-time users Hi all, While working on the next revision of the owner's manual, I've been thinking that it gives a decidedly top-down (deductive) look at the K3's controls and features. But for many people, a bottom-up (inductive) approach leads to quicker results. Imagine if, as a new user of the K3, you could have an "expert" looking over your shoulder. He could step you through a series of actions to set the radio up for a particular operating scenario, pointing out the rig's powerful features along the way. This is the idea behind "operating scripts." I'm imagining one or two-page .html documents that can be either viewed on-line or printed. Each would have a very specific title, something like: K3 Operating Script: CW DXing on 40 m And an introduction, e.g.: This script will step you through a typical weak-signal DXing session with the K3, in this case on 40 m. This band offers several unique challenges (QRN, QRM) and opportunities (like gray-line long-path to Asia or Africa). It's a great vehicle for demonstrating the K3's noise blanking and filtering, as well as diversity receive with the sub receiver (etc.) It might be formatted as a table with two columns. The first would provide unambiguous instructions, and the second could provide expected observations, variations on commands, or helpful tips. Here's an example: - Action - - Notes -- Switch to 40 m by tapping BAND UP/DN Also try: FREQ ENT, '7000', '<-' on keypad Tap MODE UP/DN to get to CW mode Hold NORM (hold function of SHIFT/LO Sets overall passband to 400 Hz; "wings" appear knob) on the DSP graphic to show passband is normalized Etc. Here's where your creativity comes in! Lead the new user through a typical session, dealing with The Dragon, searching for DX, narrowing down the passband using WIDTH, NORM ALT1/2, or presets I/II, notching out big broadcast station carriers you get the idea. I haven't thought it through much beyond that. But it's safe to say that we'd accept accurate (tested) scripts from K3 owners and create a page for them on our web site. If you'd like to try your hand at this, feel free to send an example script to me, and also copy it to Greg (AB7R), ab7r AT cablespeed DOT com. Some scripts I'd like to see: - 6 meter FM and repeaters - Making the most of stereo speakers/phones (AFX, etc.) - Pileup management in SPLIT mode - Exploring the filter passband controls - Filter setup: CONFIG menu vs. K3 Utility - RTTY QSOs without a computer - Setting up and using PC soundcard I/O 73, Wayne, N6KR --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Mic
- Original Message - From: "Gary Gregory" <[EMAIL PROTECTED]> To: Sent: Thursday, May 01, 2008 01:24 Subject: [Elecraft] K3 Mic Yes, I wrote them sevearl weeks ago and to date no response 73 Doug N3QW Speaking of which, has anyone had any problems getting Heil to respond to an e-mail request regading a mic and ordering? regards, Gary VK4WT #679 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
