[Elecraft] k3 sold.
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] fs k3/10 with options
FS Elecraft k3/ 10 with 2.7K 5-poll filter and the following options installed. KAT3 internal antenna tuner, KBPF3 general coverage option, KDVR3 digital voice recorder, KFL3A-1.0K 1.0K 8-poll filter, KFL3A-6K 6K AM filter, and KFL3B-FM 13K fm filter $2447.65 if ordered new from Elecraft unassembled. $2,100 shipped. contact kb9...@arrl.net. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] k3 and kenwood mics
I have used the mc43, 47, and 50, with the k2 and k3 successfully with no modifications. As a matter of fact, I am using the 47 with mine now. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] k3 vfo a encoder trouble
Periodically, while tuning the bands, the knob will become much more difficult to turn. If I keep going, there will be a light feeling thumpish action, and suddenly it turns easily again. Seems to happen more when turning counterclockwise. Any ideas out there? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] tx gain calibration
Must I do this for each antenna port? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] switching power supplies
I have used the alinco dm-330v (think that number is correct). Has a small fan at the rear, but in normal use you just cannot hear it over normal room noise. Like most switchers it destroys broadcast AM reception, but haven't heard anything while using the k3 for normal ham use. it is a 30 amp supply with meters, and adjustable with a detent at 13.8 v. Also has a switch to set for 13.8 v fixed operation. binding posts on the rear, with two sets of spring connectors on front and cigarette lighter connection. the entire top is a heat sink, but I've never gottten it over fairly warm. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] further to k3 util problem
Just remember when having a friend set up the speakers after installing filter, is it possible he accidentally changed something about the serial port? If so, if I do a reset, will it come back enough to reload firmware from last known good config? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] k3 utility problem
Just added the kfl3 to my k3. Can't get k3 utility to communicate with the k3. However, k3voice works fine. Still using the same old edgeport I've always used, no software changes to the pc that I can think of. How can I test further? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] at1 attenuator questions
I have an at1. How do I tell on from off for each switch, and what are the values of each switch? Totally blind, so need a little help. Thanks and 73. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] switching from vfo a to b in sync am
I noticed the other night while listening to the gran ole opry on the k3, that when I pressed the a/b (keypad 1) button to switch to radio havana on 5970, got a longer beep and nothing happened. But, when on a ham band, a/b worked fine. Am I missing something, or is this a bug? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Voice Announcement
To all: At the present time, there is a pc program, k3voice, which gives limited access to the k3 display and settings. Elecraft plans to add access to all practical menu options in the future. As for operating a k3 while blind, I have been doing so for two years. The switchtone option is extremely helpful. While I have not yet figured out some things like psk and rtty decoding, noise reduction settings, and agc settings, the rig works well, and I only expect it to get better. Wayne and Eric have publicly promised access to all their rigs in the past, and I am confident they will come through. Where is KenYaecom with their million dollar engineering staffs with full access? I've only seen two, and rigs, and no promises, both rigs from kenwood. Yes Tobey, you are spot on that older rigs without menus are much easier to operate. However these are becoming like hen's teeth. I recently found an icom 751A with voice synth and external keypad. I, of course, snapped it up. Good discussion, let's keep it going if the list approves. - Original Message - From: "Toby Pennington" To: Sent: Sunday, April 18, 2010 8:51 AM Subject: [Elecraft] Voice Announcement >I think a word of caution might be in order here. I am not sure if >Elecraft will add voice announcement or not. It is a good feature and >found on many rigs today. > > However, the K3 would not be my choice for a blind ham or a soon to be > blind ham. I believe an older rig where all the knobs and buttons are > for single use purpose would be a lot better. Not to mention a rig where > there are not menus or not many menus might be more appropriate. > > I had enough trouble figuring out how to operate a K3 (especially using > the menus and memory ) and I can still see. > > I would not know for sure what to recommend for a blind ham, but it sure > would not be the K3. > > Toby W4CAK > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ Information from ESET NOD32 Antivirus, version of virus > signature database 5038 (20100418) __ > > The message was checked by ESET NOD32 Antivirus. > > http://www.eset.com > > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] building k3
To all wondering about building the k3 kit; I purchased and built my k3 kit in April 2008. With the help of a friend to look at the pics in the manual and find the correct parts, we built in about 22 hours total build time. Like you, I had the ten watt basic kit with an extra filter. Build and enjoy. I am totally blind and managed it, so you shouldn't have any trouble. Good luck. You wil enjoy your k3. I certainly do. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] setting filter engage frequency
Thanks all. I was over thinking the problem. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] setting filter engage frequency
I was looking in the k3 utility filter config tonight, but couldn't find where you set the frequency at which the filter is engaged. How do you go about this? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] usb to serial
I have had great luck with a thing called an edgeport made by insideout networks. Not sure if it exists anymore. They offered 4, 8, and 16 port versions that I know of. Gets power from the usb port, and serials can be defined as rs232 or 422. Supports all the hardware handshake lines. All my k3 connections are through this device under windows xp, and never had a problem. Hope this helps someone. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Someone looking for a krc2 can't find message
Saw someone looking for a krc2 I think friday morning. I have one available. Please write back off list. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] amp recommendation
Looking for something in the 300 to 500 watt range. Preferrably with as little tinkering as possible for band changes. Totally blind, so reading a lot of meters is out. Will drive with either a k3, or icom 751a. Just checking to see what my options might be. TIA for any assistance. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] frequency shitf necessary when using syncro detect
I use sync detect for listening to broadcast AM. However, when I turn on the sync feature, I find that I must shift frequency up 10 hz. Anyone else noticed this? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] k3 cw default bandwidth
I have a 1K and 400 hz filter in my k3. When changing to cw, it automatically goes to 400 hz. Can this be set to start out at the 1k setting? If so, please be specific on how to do this. I'll have to find someone to read the menu screens for me. Thanks. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] k3 build or buy
I purchased my k3 as a kit and with a little help from a sighted friend managed to build the basic k3 in about 22 hours total time. Not sure about the calibrations since I didn't have a reliable power meter at the time. However, for what its worth, a blind man can do it. Build and enjoy. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] have to brag a little
Just got the certificate today. I wwon first place qrp indiana section in the arrl 160 contest for 2008. Rig was a k3, antennas were a 90 foot half sloper fed against the 32 foot tower which anchors the feed point; and a doublet 120 feet long, with coils on each end made of 20 feet wire wound on a piece of 2 inch pvc conduit, with a 10 foot tail hanging at each end. all in all 180 feet wire in the air, fed with 300 ohm window line to a 4:1 balun at the entrance to the shack. Hard to believe with such puny antennas. Thanks everyone who pulled me out. 73 Used the k3 auto tuner for everything. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] tuning rate
I prefer a constant rate myself. That variable rate feature always gives me trouble. Being totally blind, I count revolutions to get reasonably close to where I want to be. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] new k3 beta firmware
Just went to the beta link but only saw 3.25. What am I missing? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] headphones for k3 / kx1
Been reading with interest the discussion on phones for the kx1. I would like a good set, but not in ear types. Never been able to find a set of earbuds that will stay in and be comfortable. So, any suggestions of non earbuds would be helpful. Thanks for the help. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] k2/100
To the person wanting an external unit for the k2, it can be built into a separat box and connected externally. Best of both worlds. disconnect two cables, and away you go with a portable 15 watt k2. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] firmware request
The "1" switch on the number pad switches from vfo a to b. Could the switch tone function be changed such that it gives an indication of which vfo? i.e. low tone for A, and High for B? This would be very helpful for setting splits. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] cw to data questions
How do I turn text dec off? Tried issuing "swh40;" no dice. I thought it would act as a toggle. Also, noticed when sending that "..--" does not immediately kick me out of transmit mode as the manual states. Running firmware 2.78. Issuing commands with hyperterminal. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] switch emulation table -- got it
Thanks to all. Got my table. Now to start playing with getting psk up and running. 73 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] switch emulation numbers table
I've been looking at the k3 programmer's reference trying to get a feel for what can be accomplished via the serial port. However, the switch location table in the section on the swt and swh commands got severely scrambled in the conversion to text. Could someone out there please send me that table as one column? It would make my investigations go much more quickly. Thank you all for your time and consideration. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] k3 rear panel question
Thanks Greg. I neglected to say that I am blind, so can't use the pics in the manual. However, Greg got the order correct. Tested with a small speaker. Thanks all. This is one of the best lists I am on. 73 - Original Message - From: "Greg - AB7R" To: "Gary Lee" Sent: Thursday, February 12, 2009 10:22 AM Subject: Re: [Elecraft] k3 rear panel question Gary, The RCA near the power pole is for a 12V of an accessory you can power from the K3. Withouth the KXV3 there is no RX only antenna. I suggest looking at the FAQ or the manul of the K3 available free online at the Elecraft website. I am not at my radio right now but from memory the 3.5mm jack from left to right are: EXT SPKR, PHONES, MIC, LINE IN, LINE OUT. But check the manual to be sure. - 73, Greg - AB7R Whidbey Island WA NA-065 On Thu Feb 12 7:11 , 'Gary Lee' sent: >I have the ten watt k3 without the kxv3. > >I assume the rca next to the power pole is the receive antenna. >What is the order of the 3.5 mm jacks below the serial and accessory ports? > >Thanks for the help. >__ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: Elecraft@mailman.qth.net','','','')">Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html __ Information from ESET NOD32 Antivirus, version of virus signature database 3848 (20090212) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] k3 rear panel question
I have the ten watt k3 without the kxv3. I assume the rca next to the power pole is the receive antenna. What is the order of the 3.5 mm jacks below the serial and accessory ports? Thanks for the help. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] terminal window in k3 utility
Is this actually a full duplex serial connection to the k3? I am totally blind, so consider the following. Can I set up psk sending through the paddles, and route the decoded output through the serial port so I can read it using the screen reader on my pc? I've never done digital modes before, but want to give them a try, and the k3 looks like the way to do it. 73, and thanks for the help. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] another firmware suggestion
i would like to have a double beep or something similar along with the flashing tx LED and display of "MCU LD" described in the section "forcing a firmware download" on page 42 of the manual. Hopefully, I'll never need this, but it would sure be nice for a blind op. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] test mode indication
How about a couple of beeps when ptt is pressed if in a phone mode, and something, I'm not sure what for cw. Maybe a drastic change in sidetone frequency. This solves the problem for a blind operator, and brings another sense into play for the sighted to say "HEY, PAY ATTENTION, SOMETHING IS'NT AS YOU EXPECT". I have noticed that many times engaging two senses makes the light dependent (hi hi) pay attention. Please take the humor as intended, its been a long day programming. But the suggestion is serious. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] bug in switch tones
i note that the four switches which are in combination with the filter, power, and keyer speed knobs do not emit tones. This would be especially useful for the power/comp control. That way I have some idea which level I am adjusting. Thank you for your time and consideration. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] firmware suggestion for k3
I would like some sort of audible indication that a reasonable match has been obtained with the autotuner. I sugggest "k" for a match, and "s" for swr alert. Failing that, and maybe easier since you have the switch tones in place, a high pitched beep for good match and low for no good. Being totally blind, this would sure increase my confidence operating the k3. What you all think? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] sending with either hand
Good Idea. I've never tried it with paddles, but I qso with my left hand and a streight key every couple of weeks. I'll have to try the paddle experiment soon. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] using maldol whip with kx1
Just got my maldol whip with 40 and 20 meter coils. Need some suggestions on how to use them efficiently. I will not be walking with them, got to use my ears for things like crossing streets and dodging college students. Also, where do you get a cable with a female b&c on one end? Thanks for the help. These look like too much fun. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.762 / Virus Database: 510 - Release Date: 9/13/2004 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] kbl1 question
Got the kbl1 kit. Looks pretty nice, I wonder if there are binding posts which would work in place of the screw on connectors? I like to use banana plugs for my balanced lines. THanks for the information. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.699 / Virus Database: 456 - Release Date: 6/4/2004 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net http://mailman.qth.net/mailman/listinfo/elecraft You must subscribe to post. Subscriber Info (Addr. Change, Unsub etc): http://mailman.qth.net/subscribers.htm Elecraft page: http://www.elecraft.com
[Elecraft] a few kx1 questions
Just got #698 today, and have a few questions. 1. Is there a way to get the cw to read the whole frequency, down to the last decimal? Need this to do the vfo calibrate function. 2. We have a small problem with batteries. When batteries are inserted, and the thumb screws are tightened all the way down, there is an intermitent somewhere. The rig will not power on most of the time. Any ideas where to have my builder look when he gets time? 73 and thanks for a wonderful little rig. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.699 / Virus Database: 456 - Release Date: 6/4/2004 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net http://mailman.qth.net/mailman/listinfo/elecraft You must subscribe to post. Subscriber Info (Addr. Change, Unsub etc): http://mailman.qth.net/subscribers.htm Elecraft page: http://www.elecraft.com
[Elecraft] kx1 698 qrv
Just got my kx1 #698 from my builder. First contact was about a half hour ago on 40. Way and Eric, you did a wonderful job. This rig is a joy to operate eyes free. We've got a few things to work out, but I'm sure that will come. Still got to calibrate the s-meter, and vfo. Also small baattery problem; but what a cute and useful little rig. THanks to all the elecraft team. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.699 / Virus Database: 456 - Release Date: 6/4/2004 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net http://mailman.qth.net/mailman/listinfo/elecraft You must subscribe to post. Subscriber Info (Addr. Change, Unsub etc): http://mailman.qth.net/subscribers.htm Elecraft page: http://www.elecraft.com