Re: [Elecraft] K3 - what power supply are you using?
I Bill, I'using a single 28A Difona ( http://www.difona.de/f_k_s.php?&language=en&ID=8a&geraet=netzteil) switching power supply for all my rigs and they all work very well. I have no doubt for a switching amp. 73 Giampiero / IW2ESL On Thu, Oct 11, 2012 at 1:09 PM, Bill wrote: > I am about to replace my 35 year old Astron 35 amp supply. The choices > are switchers or analog and 20 or 35 amp. The supply will ONLY be used > for the K3. Everything else in the shack is on a different supply. > Questions: > > Are the 20 amp supplies enough power for the K3? > Are switchers any good or is their track record poor for life and noise? > Should I consider anything other than Astron? > > Thanks, > > Bill W2BLC > > -- > IN GOD I TRUST (but, NOT a single politician) > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- Giampiero Raschetti __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 I/Q to soundcard isolation
I do connect KX3 I&Q directly into my MacBookPro stereo in-line without any additional isolation too and it works great without any problem at all running under a parallels desktop virtual machine. Is there any special reason to isolate this line ? 73, iw2esl / Giampiero Sent from my iPad On Oct 14, 2012, at 11:08 PM, Barry LaZar wrote: > Jeff, > I don't know what problem you're having, but I run without any > additional isolation with no problem. I go directly from my KX3 I&Q out > to my soundcard. Try it and see if you really need to go to the extra grief. > > > 73, > Barry > K3NDM > > On 10/14/2012 4:43 PM, Jeff Herr wrote: >> I need to provide electrical isolation between the I/Q output and my >> mic/line input. >> Since this is a 2 channel output I need 2 channel (stereo) isolation. >> >> Is there a commercial product anyone can point out to do this? >> >> If not then I must choose a couple of audio transformers and wire them up to >> do the job. >> Would someone care to make a recommendation? >> >> Here is the DigiKey audio transformer page for easy reference >> http://www.digikey.com/product-search/en/transformers/audio/786564 >> >> >> >> Jeff Herr WW6L >> 4636 Kelton Way >> Sacramento,CA 95838 >> 916.925.6089 >> her...@comcast.net >> >> >> >> >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 I/Q to soundcard isolation
Do you have this flood of noise in any laptop power condition or only when operating while battery are charging and no noise when running with battery power alone ? On Mon, Oct 15, 2012 at 2:40 PM, Jeff Herr wrote: > When I connect to my asus laptop I get a flood of noise.in the radio. > > -Original Message- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Giampiero Raschetti > Sent: Sunday, October 14, 2012 22:02 > To: Barry LaZar > Cc: elecraft@mailman.qth.net > Subject: Re: [Elecraft] KX3 I/Q to soundcard isolation > > I do connect KX3 I&Q directly into my MacBookPro stereo in-line without > any > additional isolation too and it works great without any problem at all > running under a parallels desktop virtual machine. > Is there any special reason to isolate this line ? > > 73, iw2esl / Giampiero > > > Sent from my iPad > > On Oct 14, 2012, at 11:08 PM, Barry LaZar wrote: > > > Jeff, > > I don't know what problem you're having, but I run without any > > additional isolation with no problem. I go directly from my KX3 I&Q > > out to my soundcard. Try it and see if you really need to go to the extra > grief. > > > > > > 73, > > Barry > > K3NDM > > > > On 10/14/2012 4:43 PM, Jeff Herr wrote: > >> I need to provide electrical isolation between the I/Q output and my > >> mic/line input. > >> Since this is a 2 channel output I need 2 channel (stereo) isolation. > >> > >> Is there a commercial product anyone can point out to do this? > >> > >> If not then I must choose a couple of audio transformers and wire > >> them up to do the job. > >> Would someone care to make a recommendation? > >> > >> Here is the DigiKey audio transformer page for easy reference > >> http://www.digikey.com/product-search/en/transformers/audio/786564 > >> > >> > >> > >> Jeff Herr WW6L > >> 4636 Kelton Way > >> Sacramento,CA 95838 > >> 916.925.6089 > >> her...@comcast.net > >> > >> > >> > >> > >> > >> __ > >> Elecraft mailing list > >> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >> Help: http://mailman.qth.net/mmfaq.htm > >> Post: mailto:Elecraft@mailman.qth.net > >> > >> This list hosted by: http://www.qsl.net Please help support this > >> email list: http://www.qsl.net/donate.html > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net Please help support this email > > list: http://www.qsl.net/donate.html > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > -- Giampiero Raschetti __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3: iPad spectrum display
Good job Griffin iMIc interface can easily be found on amazon. Giampiero - IW2ESL Sent from my iPad On Dec 2, 2012, at 2:48 AM, Jim Sheldon wrote: > Having seen the KX3 producing a spectrum display (although without actual > frequency information from the radio itself) on an Apple iPad at the Plano, > TX hamfest, and finally getting my own KX3, I started looking for a way to do > this myself. > > The free iSDR app will produce the display if you can get the KX3's I and Q > outputs into the iPad via some sort of sound card device. Turns out that at > least some of the iPads can accept USB input from some supported devices > through an available camera adapter which has the input connector to the iPad > on one end and a female USB connector on the other end of a short cable. The > audio device I found that most everyone used was the Griffin Technologies > iMic, but after getting one of the new 16Gig iPad's this afternoon, none of > the stores in the Wichita area had even heard of the iMic let alone had one > in stock. > > I had been using a TASCAM US-100 USB sound card to capture high quality > stereo audio on my laptop rather than try to use the microphone input and for > grins and giggles, I plugged it into the camera adapter and hooked up the > KX3's I/Q cable to the stereo "line" input. Got no results until I > remembered to turn on the I/Q outputs in the KX3's menu -- BINGO, works like > a champ and with the super high resolution "Retina" display on the new iPad, > it really looks nice. > > Now, I had to quit playing with it and put the iPad back on the charger > which, unfortunately uses the same input as the camera adapter - LOL. > Tomorrow I'll have to learn how to run Ham Log without a "pigtail" for the > time being until the supplier gets back from his travels in a few days and I > can order one. > > Jim - W0EB > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html