Re: [Elecraft] K3 and MicroKeyer MKII
Dr Evert, First off all for MK2 Use separate virtual comports in the router for every Item you want to control. So no virtual comport sharing. Eg cat virtual comport = ptt virtual comport must be avoided. That can cause strange behaviour in combination with different programs. For the K3 Check your PTT-KEY setting in the K3 advanced menu. Start with disabling those setting e.g. OFF-OFF That way you can't trigger PTT or Key via the K3's DB9 connector You do not need those controls if you use the MK2 anyway Gd luck Hugo pa4la __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 command mode default k30 k31
I am playing with my Microham MK2 and have learned that, the K3 must be in extended (k31) command mode for the MK2 to switch correct between audio or fsk data modes When the K3 is powered on, the mode setting is always standard k30. Putting the k31 command via a terminal is not a big issue but it would save a couple of mouse clicks :) Is there a way tot save the k31 setting or a way to make k31 the default setting? Tnx in advance, Hugo pa4la __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Request VFO round freq when coarse tune
K3 FW feature request: Freq rounding when coarse tune as an option Rounding of frequencies for digits smaller than the step size when using coase tuning. Perhaps independent settings for mode and/or depending on frequency range. VFO_OFS=ON, using rit/xit when off for coarse tune Example rounding: Mode AM, coarse step 1khz Freq 7012.45 when using coarse tune I see 7013.45, 7014.45 etc for the next steps It would be nice to see 7013.00, 7014.00. Same as on 10mtr FM 5 khz coarse. First you have to tune the vfo to the round freq (channel), only then you can effectively use coarse tune to hop through the channels. An extra feature could be automatic "channel" frequency set within a part of the spectrum The European Medium wave band is a good example, 9khz channels beginning at 531Khz ending 1620Khz BC, CB, 10mtr FM and even some digimodes on 20m are more examples Coarse tune could be a nice operational feature to quickly scan "canalized" activity on a band. But.. well. when I read this..I get a dejavu. I talk about the channel encoder function as on my gd old TS850. Could that "tool" be implemented pse? Thanks in advance, Hugo pa4la ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com