[Elecraft] KPA1500 segment SWR memory

[Jorge Diez (CX6VM-CW5W)]

Hello

I read that KPA1500 have a memory to recognize SWR of the antennas on different 
frequencies 

What happen if the antenna vary SWR periodically?

My warc dipole vary SWR, usually I have 1.5:1 on 18070, but today (raining day) 
SWR is 1.17:1

Is this a problem for KPA1500?

Thanks for the feedback!

73,
Jorge
CX6VM/CW5W


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] MH2 mic and the K3

[Jorge Diez (CX6VM-CW5W)]

Hello Mike

Yes, it works with K3

https://ftp.elecraft.com/MH2/E740030_MH2_Rev_D.pdf

73,


Enviado desde mi iPhone

> El 26 ene. 2021, a la(s) 15:14, NJMike  escribió:
> 
> Will the MH2 hand mic that was originally for the K2 work with the K3?  I
> know there is an MH4 mic now that works with both rigs.
> 
> Thanks,
> Mike NJ2OM
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cx6vm.jo...@gmail.com 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Configuration of N1MM with K3 RemoteRig

[Jorge Diez (CX6VM-CW5W)]

Charly

You  also need a rs232 to usb interface, from COM1 on front of remoterig box to 
another USB port on the local computer running N1MMLogger 

73,
Jorge
CX6VM/CW5W

Enviado desde mi iPhone

El 4 may. 2019, a la(s) 13:50, Charles Tropp  escribió:

> Hi,
> 
> I recently installed a private K3-Remote System using my existing K3 and
> adding a K3/Ø Mini Control Panel. I have the RRIGSET and all required
> cables installed. I have tested the system and it appears to work well as I
> can both hear and control the remote radio and send CW on my straight key
> plugged into the back of the K3/Ø.
> 
> I would like to add the N1MM contest program using windows 10 Lap Top
> locally with a USB cable running from the USB socket on the front of the
> RRC to my Lap Top. I have configured both RRCs COM1 to: “Mode-7 CAT to COM2
> (local & remote)”.  The serial setting for COM1 has been set “Use USB Com
> Port as COM1” to YES. COM3 (extra) mode has been set to “Mode -8 Winkeyer”.
> 
> RRC 1258 Ø (COM 1)
> 
> RRC 1258 1(COM 11)
> 
> RRC 1258 2 (COM 12)
> 
> RRC 1258 3 COMExtra (COM 2)
> 
> So far I have been unable to configure N  1MM to communicate with my K3
> remote. COM 11 doesn’t work and COM12 produces unsolicited and random CW
> transmissions. COM2 make no difference.  Interestingly, I can use my K3
> remote with SKCCLogger with COM2. Any assistance would be greatly
> appreciated.
> 
> 
> 
> 73 Charles N2SO
> 
> 
> 
> 
> 
> -- 
> *73, Charles N2SO*
> *Treasurer, Quarter Century Wireless Association, Inc.*
> *www.qcwa.org *
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] Will there be a K4

[Jorge Diez (CX6VM-CW5W)]

It happened with me too

They will not tell you about this, but just in case wait after Dayton 

I am waiting after Dayton to know if will be a smaller remote option 
(integrated K3/0 mini + remoterig)

73,
Jorge
CX6VM/CW5W

Enviado desde mi iPhone

El 24 mar. 2019, a la(s) 13:22, Bob McGraw K4TAX  escribió:

> Wait and see or roll the dice  
> 
> Bob, K4TAX
> 
> 
> Sent from my iPhone
> 
>> On Mar 24, 2019, at 12:16 PM,   wrote:
>> 
>> Before I spend money on a K3S, I’m just curious.. is a K4 in the planning 
>> stages? I bought my K3 and unpackaged it and just days later the K3S was 
>> announced. I was livid.. LOL
>> 
>> so.. what say Elecraft?
>> 
>> Ronnie W5SUM
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] new K3/0 Mini

[Jorge Diez (CX6VM-CW5W)]

That’s the idea, all contained in one box, wired internally

I know is possible, and already done, but never to sell it

But Fred’s idea is better, just don’t know if it’s possible with actual K3 or 
K3s or will need a complete  new radio

73,
Jorge



Enviado desde mi iPhone

El 28 feb. 2019, a la(s) 11:38, Harry Yingst via Elecraft 
 escribió:

> Back when I was traveling a lot I considered getting the old style K3/0(the 
> full size one)and building all of the remote hardware into it, so it would be 
> all self contained in one box.
> 
> 
>   On Thursday, February 28, 2019, 9:12:51 AM EST, Jorge Diez - CX6VM 
>  wrote:  
> 
> Hello
> 
> any idea if will be a new control radio for remote? Like K3/0 Mini with
> remoterig integrated inside it?
> 
> Maybe for Dayton will have it?
> 
> -- 
> 73,
> Jorge
> CX6VM/CW5W
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] Inrad W1 Headset and K3

[Jorge Diez (CX6VM-CW5W)]

Hi Jim

I bought several MC500, I am happy with them, but not good isolation when doing 
multi on SSB

And the foam is shelled very quickly

73,
Jorge

Enviado desde mi iPhone

El 18 feb. 2019, a la(s) 19:56, Jim Brown  escribió:

> On 2/18/2019 5:02 PM, Dick Dievendorff wrote:
>> I used mine this weekend, I am very happy with them.  The headset has a 1/4 
>> stereo phone plug that is quite robust when compared with a 3.5 mm plug and 
>> an adapter.  The cable is long and seems sturdy.  Very comfortable over the 
>> ear phones with good isolation.
> 
> If I had $195 (headset plus mic plug adapter) to spend and needed a good 
> boom-mic headset, I'd buy a CM500 and a couple of bottles of a REALLY nice 
> single malt. The only reason I can think of to spend that kind of money is if 
> the headphones have REALLY great isolation from room noise, and then only 
> room noise was a problem for me (like in a SSB multi-op contest station). And 
> I'd do the A/B comparison before plunking down the bucks.
> 
> There's BS in the product description too -- "1 1/2 feet coiled cord for RF 
> suppression" is nonsense. If anything the added length makes it a better 
> receiving antenna for radios with RF problems! And there is zero magic to 600 
> ohms -- we haven't matched impedances in audio for nearly 50 years!  It's 
> simply a low impedance mic, and virtually all mics used in ham radio have 
> been low impedance for at least that long.
> 
> I've been using a CM500 for about ten years, and the only thing that breaks 
> is the cable, because I'm really a klutz with headsets. It's not replaceable, 
> and I don't see a note that the cable in this one is either. If I'm not 
> mistaken, the excellent Sennheiser headset DOES have a replaceable cable.
> 
> 73, Jim K9YC
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cx6vm.jo...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] LP-100 software

[Jorge Diez (CX6VM-CW5W)]

Hi
I use it also,  yet don’t want to use TeamViewer to see it

I am using Green Heron Everyware Server and Client and want to see LP-100 the 
same way, less bandwidth consumption 

73,
Jorge

Enviado desde mi iPhone

El 25 ene. 2019, a la(s) 18:07, Andy Durbin  escribió:

> "What are you using?
> 
> I have used LP-100 VCP and TeamViewer but my LP-100A is usually connected to 
> my data logger and I can use TeamViewer to read that too.
> 
> Any k3wyc
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cx6vm.jo...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] LP-100 software

[Jorge Diez (CX6VM-CW5W)]

Hello

Anyone use a server/client software to see remotely the measurements of LP-100 
digital wattmeter? (SWR and PWR)

What are you using? 

73,
Jorge
CX6VM/CW5W

Enviado desde mi iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3/0 MINI manual or photos

[Jorge Diez (CX6VM-CW5W)]

Thanks Charly

I thought there’s a specific K3/0 mini manual, like the K3 manual, that show 
all plugs that it have

For example, PTT in the back, is RCA plug? 

Thanks
Jorge 

Enviado desde mi iPhone

El 16 nov. 2018, a la(s) 21:41, Charles Tropp  escribió:

> Hi Jorge,
> 
> On the Elecraft website, click on the menu, select support, manuals and in 
> the next window click the red view  button next to K-Line Product Manuals and 
> then scroll down to the K3/0 Manual and click the red view button. In the 
> next window under title click the name of the manual in blue. Voila!
> 
> On Fri, Nov 16, 2018 at 3:01 PM Jorge Diez - CX6VM  
> wrote:
>> Hello
>> 
>> do you know where to find K3/0 MINI photos (front/back/sides) to see all
>> connecttos that it have?
>> 
>> Manual is only for sale on Elecraft website
>> 
>> -- 
>> 73,
>> Jorge
>> CX6VM/CW5W
>> 
>> 
>> Libre
>> de virus. www.avast.com
>> 
>> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to charlestr...@gmail.com
> 
> 
> -- 
> 73, Charles N2SO
>  Treasurer, Quarter Century Wireless Association, Inc.
> www.qcwa.org
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPA1500 fan noise concern

[Jorge Diez (CX6VM-CW5W)]

That’s will be great! 

Enviado desde mi iPhone

El 29 may. 2018, a la(s) 22:47,   escribió:

> I was suggesting an optional hardware controller separate from the amp, not
> operating it remotely though a computer. OM Power, Acom and Henry have done
> this with some of their models.
> 
> John KK9A
> 
> Bill Stravinsky k3wjv wrote 
> Tue May 29 14:40:43 EDT 2018
> 
> 
> John
> I would imagine the 1500 will be remotable just as the 500 is.  A friend of
> mine remotes his 500 to the basement just as he did with his Acom 2000aand
> he is investigating remoting the 1500 he just got.  As for a control box I
> don't know.  Not sure if the amp faults will be visible in the vfo B area
> ofthe K3.  It tells you its on-off or in standby.
> BillK3WJV
> 
> 
> 
>On Monday, May 28, 2018, 9:18:04 PM EDT, john at kk9a.com  kk9a.com> wrote:  
> 
> I imagine that due to the KPA1500's size it requires a higher volume of air
> than a large amplifier would. Its small size and weight make it appealing.
> The Acom 2000 has a control box that is separate from the amp so you really
> never hear the amp run. I am wondering it something similar can be done with
> the Elecraft KPA1500, perhaps an option like the K-Pod, so that the noise
> source is further from the operating position?
> 
> John KK9A
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cx6vm.jo...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com