[Elecraft] QRP Power Level?
Can someone tell me the official definition of QRP Power Level? Is it 5 watts for voice and CW modes? I notice that many contests have a QRP class but they do not define QRP power and I cannot find it on ARRL site. Thanks, Kent KD5SHM K2/100 #4631 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re: Transverter with Common IF
I am now curious if the Y RCA cable connector on the K2's Transverter option will also work for the menu setting of High Power on the Transverter (H0.1 - H12.7 watts) or does this only apply for the Low Power setting of milliwatts? Kent KD5SHM wayne burdick [EMAIL PROTECTED] wrote: True enough, Don. Thanks for mentioning this. Of course the external Y cable has the advantage of being quickly removed if one wanted to use a different transverter. 73, Wayne N6KR On Jan 17, 2006, at 7:00 AM, Don Wilhelm wrote: A short jumper wire across the connector wiring points on the K60XV board would do the same as the Y adapter and be just as easy - one less connector point to cause future problems IMHO. 73, Don W3FPR --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Transverter with Common IF
I am trying to use my K2/100 (K60XV transverter interface installed) with a Down East Microwave 900mhz transverter which has only a common IF (not a TX IF and RX IF). The transverter requires low power IF around 0.10 miliwatts. (Transmitting has been tested and works fine) The problem is that the DEMI transverter has a common IF and the K2 has seperate TX and RX IFs. I phoned Elecraft today and they suggested trying to modify the transverter to pull the RX IF seperately. Anyone have any other solutions or ideas? KD5SHM Kent ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com