[Elecraft] W2 Directional Coupler
I have a spare 1.8-54 MHz 200W Max Directional Coupler that I'd like to sell for $100 + USPS. Please email off list. Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] W2's for Sale
I have two W2 Wattmeters for sale. I formerly used four W2's and have reduced to two. One W2 has a 2K Power level detector and the other has a 200 Power level detector. Each with three cables, programming, data, and power cable. I am selling each for $200 + USPS priority shipping. Thank you, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: K3DSPLPF
Unopened K3DSPLPF available Asking $10 plus shipping Please respond off line. Thanks, 73, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: KRC2
I have a KRC2 that is excess to my needs. Asking $20 plus shipping Please inquire off line to this email. Paypal only 73, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Extra KPA500
Still have an extra amp on hand: http://k3tuf.com/images/Acom/kpa500.jpg Asking $1,750 plus shipping. SN 1808 73, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] extra items FS
Everything sold Thank you, 73, Phil K3TUF On 4/3/2017 7:40 PM, Phil Theis wrote: I have a few extra items sitting around and available for sale K3EXREF $60 shipped to 48 KXUSB $20 shipped to 48 PR6-10 $100 shipped to 48 Thanks, 73, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] extra items FS
I have a few extra items sitting around and available for sale K3EXREF $60 shipped to 48 KXUSB $20 shipped to 48 PR6-10 $100 shipped to 48 Thanks, 73, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Extra radio FS
Hi have a complete K3S line for sale. Including K3S/100, P3, KPA500, KAT500 with many extras. Filters, .250, .400, 1.8, 2.1 Others include: Xref, KDVR3 and MH2 Please contact me off list for more, if interested. Thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 firmware
Running the latest K3 Utility If I select download the latest firmware The dialog box says that it's connected to the server says to wait Then I get invalid handle error then the microsoft error box comes up, then the application crashes. Any thoughts on what gives? This been going on for a few days, I'm sure the server is not down. Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3SVGA
Installed P3SVGA in a P3 this weekend. The P3 starts up, says waiting for SVGA and shuts off. Any idea what's up? thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3SVGA
Must the firmware be installed first? If it would start now, I'd do the firmware. Phil On 6/22/2014 9:19 PM, Nr4c wrote: Look carefully at the insertion of the P3SVGA board in the P3 board. Also, have you installed the FW on the P3 to utilize the SVGA addition? Sent from my iPhone ...nr4c. bill On Jun 22, 2014, at 8:46 PM, Phil Theis p...@k3tuf.com wrote: Installed P3SVGA in a P3 this weekend. The P3 starts up, says waiting for SVGA and shuts off. Any idea what's up? thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Power Lock on K3
Is there a way to lock power setting on the K3 ? Going into a contest setting and don't want unknowing operators turning up the power Thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Audio mute while sending from sound card
Scenario: Contest setup, going from voice to WSJT While sound card audio comes in from the sound card, is it possible to automatically prevent microphone audio ? Looking for a bullet proof way to move gracefully from SSB mode to WSJT mode. Thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Power Lock on K3
Beautiful, thank you. Just what the DR ordered. Phil On 6/4/2014 8:56 PM, Wayne Burdick wrote: On Jun 4, 2014, at 5:32 PM, Phil Theis p...@k3tuf.com wrote: Is there a way to lock power setting on the K3 ? Going into a contest setting and don't want unknowing operators turning up the power. Tap '1' while in the PWR SET menu entry. This locks PWR, MIC GAIN, and CMP (compression). Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Power setting for KPA500
Greetings, It was my understanding that power settings on the K3 would track separately when the KPA500 was off. On my K3 if I set a power level with the 500 on, it stays when I turn it off or put it on standby. What am I missing in my settings to pull this off? thanks, 73, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Power setting for KPA500
No, that's it. That is the magic I was looking for Ken. Thanks, 73, Phil K3TUF On 5/13/2014 11:48 AM, Ken K3IU wrote: Do you have K3CONFIGPWR SET set to Per Band? 73, Ken K3IU ~~~ On 5/13/2014 11:28 AM, Phil Theis wrote: Greetings, It was my understanding that power settings on the K3 would track separately when the KPA500 was off. On my K3 if I set a power level with the 500 on, it stays when I turn it off or put it on standby. What am I missing in my settings to pull this off? thanks, 73, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to kenk...@cox.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Intermittent Audio on K3
Some time ago I started losing audio while using my K3 I use Line in audio The symptom goes as follows: talking along and next thing you know there is no RF, further research shows that the radio is still in transmit but there is no audio. Put an adapter and scope on the audio input Now I have absolutely assessed that there is audio going in to the radio when this condition occurs. Initially all that was needed to get going again was to un key and re key the transmitter. But within the last few weeks it now needs a power cycle of the radio to regain audio. This occurs about 30-90 seconds into a transmission. My next step will be to take the radio apart and start re seating all connections. Another clue gained this morning on 75 meters was that when my audio quits, the other station can still hear me very very faintly. Lending credence to the audio theory. I have never used the front panel mic on this radio, but I do have an MH2 from K2 days that I might re purpose to plug into the front and see what the results may be. While I prepare for the next step in troubleshooting, has anyone else ever seen this anomaly ? 73, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA Aux cable
Hi again Wayne, This does work. My only issue is that when I'm on 40 meters my Microwave station is on 5760MHz and so on. I will need to do something to alert my switching system that the radio is on HF. You have the benefit of knowing that inside the radio :-) Is there a signal I can find that would allow me to disable the rest of the microwave system without doing frequency decoding? Nice amp btw, 73, Phil K3TUF On 1/20/2014 9:14 PM, Wayne Burdick wrote: OK, Phil. Let me know if this works. Wayne On Jan 20, 2014, at 6:01 PM, Phil Theis p...@k3tuf.com wrote: Wayne, I hadn't noticed that when I first set this up (years ago). I will try, don't see why not. Only exception is that my 6m is TRN, but that shouldn't matter since I won't use the KPA on 6m. Thanks, Phil K3TUF On 1/20/2014 8:50 PM, Wayne Burdick wrote: Phil, Could use use the HF-TRN setting of the BAND outputs? (Page 19 of the K3 owner's manual, right column, first paragraph.) This setting was specifically included to handle the situation where both HF and VHF band switching is required. Further details are provided on this page. If that doesn't work, and you really have to use the TRN setting, you have two other band-switching options for the KPA500: its own front-panel switches, and RF sensing. 73, Wayne N6KR On Jan 20, 2014, at 5:31 PM, Phil Theis p...@k3tuf.com wrote: Thanks Jack, then I must be changing my KIO3 Setting back and forth between TRN and Normal based on HF use or VHF use? right Phil K3TUF On 1/20/2014 8:28 PM, Jack Brindle wrote: The KPA only talks on the Auxbus, it does not listen. So yes, the four BAND signals are needed. Jack Brindle, W6FB Sent from my iPhone On Jan 20, 2014, at 5:23 PM, Phil Theis p...@k3tuf.com wrote: In the KPA cable going to the K3 the band data lines are called out, yet there is no discussion about instructing the K3 firmware to set band data. My band data is used for transverters with Config:KIO3 set to TRN. If these lines are not used and band information is derived from AUXBUS, then do we really need the four band lines in the cable going from KPA to K3? thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA Aux cable
Wayne, That will absolutely take care of it. Thank you. 73, Phil K3TUF On 1/21/2014 9:40 PM, Wayne Burdick wrote: Hi Phil, When you're using the K3's low-power transverter output (XVTR OUT), the DIGOUT0 line changes state. We provided this to allow for external hardware decoding of HF vs. transverters. Check page 19 and let me know if this helps. Wayne On Jan 21, 2014, at 10:58 AM, Phil Theis p...@k3tuf.com wrote: Hi again Wayne, This does work. My only issue is that when I'm on 40 meters my Microwave station is on 5760MHz and so on. I will need to do something to alert my switching system that the radio is on HF. You have the benefit of knowing that inside the radio :-) Is there a signal I can find that would allow me to disable the rest of the microwave system without doing frequency decoding? Nice amp btw, 73, Phil K3TUF On 1/20/2014 9:14 PM, Wayne Burdick wrote: OK, Phil. Let me know if this works. Wayne On Jan 20, 2014, at 6:01 PM, Phil Theis p...@k3tuf.com wrote: Wayne, I hadn't noticed that when I first set this up (years ago). I will try, don't see why not. Only exception is that my 6m is TRN, but that shouldn't matter since I won't use the KPA on 6m. Thanks, Phil K3TUF On 1/20/2014 8:50 PM, Wayne Burdick wrote: Phil, Could use use the HF-TRN setting of the BAND outputs? (Page 19 of the K3 owner's manual, right column, first paragraph.) This setting was specifically included to handle the situation where both HF and VHF band switching is required. Further details are provided on this page. If that doesn't work, and you really have to use the TRN setting, you have two other band-switching options for the KPA500: its own front-panel switches, and RF sensing. 73, Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KPA Aux cable
In the KPA cable going to the K3 the band data lines are called out, yet there is no discussion about instructing the K3 firmware to set band data. My band data is used for transverters with Config:KIO3 set to TRN. If these lines are not used and band information is derived from AUXBUS, then do we really need the four band lines in the cable going from KPA to K3? thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA Aux cable
Thanks Jack, then I must be changing my KIO3 Setting back and forth between TRN and Normal based on HF use or VHF use? right Phil K3TUF On 1/20/2014 8:28 PM, Jack Brindle wrote: The KPA only talks on the Auxbus, it does not listen. So yes, the four BAND signals are needed. Jack Brindle, W6FB Sent from my iPhone On Jan 20, 2014, at 5:23 PM, Phil Theis p...@k3tuf.com wrote: In the KPA cable going to the K3 the band data lines are called out, yet there is no discussion about instructing the K3 firmware to set band data. My band data is used for transverters with Config:KIO3 set to TRN. If these lines are not used and band information is derived from AUXBUS, then do we really need the four band lines in the cable going from KPA to K3? thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA Aux cable
Wayne, I hadn't noticed that when I first set this up (years ago). I will try, don't see why not. Only exception is that my 6m is TRN, but that shouldn't matter since I won't use the KPA on 6m. Thanks, Phil K3TUF On 1/20/2014 8:50 PM, Wayne Burdick wrote: Phil, Could use use the HF-TRN setting of the BAND outputs? (Page 19 of the K3 owner's manual, right column, first paragraph.) This setting was specifically included to handle the situation where both HF and VHF band switching is required. Further details are provided on this page. If that doesn't work, and you really have to use the TRN setting, you have two other band-switching options for the KPA500: its own front-panel switches, and RF sensing. 73, Wayne N6KR On Jan 20, 2014, at 5:31 PM, Phil Theis p...@k3tuf.com wrote: Thanks Jack, then I must be changing my KIO3 Setting back and forth between TRN and Normal based on HF use or VHF use? right Phil K3TUF On 1/20/2014 8:28 PM, Jack Brindle wrote: The KPA only talks on the Auxbus, it does not listen. So yes, the four BAND signals are needed. Jack Brindle, W6FB Sent from my iPhone On Jan 20, 2014, at 5:23 PM, Phil Theis p...@k3tuf.com wrote: In the KPA cable going to the K3 the band data lines are called out, yet there is no discussion about instructing the K3 firmware to set band data. My band data is used for transverters with Config:KIO3 set to TRN. If these lines are not used and band information is derived from AUXBUS, then do we really need the four band lines in the cable going from KPA to K3? thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Serial Cable routing
What is the preferred serial cable routing for the full K line: K3, P3 and KPA500 ? Looks like from the KPA maunal that PC only goes to Amp. Thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] CW on SSB
Hi, I thought that there was a setting that would permit me to send cw while listening in the SSB mode. Is this possible? Seems to me I had this set up at one time, but cannot find the right combination to do so now. Thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] CW on SSB
Bingo, that's it. Thanks all, 73, Phil K3TUF On 2/24/2012 2:19 PM, Matt Zilmer wrote: Hi Phil, Your subject line doesn't indicate a K3, but seems likely that's what the question is about. 1. Go to CONFIG:CW WGHT 2. Press the '1' key until you see SSB +CW 3. Exit CONFIG:CW WGHT This is in the Owner's Manual, on p54 (in Rev D5). 73, On Fri, 24 Feb 2012 13:34:54 -0500, you wrote: Hi, I thought that there was a setting that would permit me to send cw while listening in the SSB mode. Is this possible? Seems to me I had this set up at one time, but cannot find the right combination to do so now. Thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1424 / Virus Database: 2113/4829 - Release Date: 02/24/12 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Low Power on 160
All bands produce full power except 160 meters. K3 (352) into a Bird dummy load When I tap TUNE the power is 7 watts. When I increase the power knob the reading indicates increase in power, but no actual power increase, then after a second the reading returns to 7 watts. I hope there is something simple that I am missing. Thanks for help. 73, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] PS noise gremlins
Has anything ever been addressed with the random noise gremlins that move across the P3 Screen? Nothing is every heard on the K3, so it must be solely being picked up by the P3. Thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Correction P3 Noise Gremlins
I am talking about noise gremlins that move slowly across the P3 I know that it could be generated by a Power Supply but I inadvertently called the P3 a PS. 73, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Broad Birdie
I wonder how we can find out what it is and get it isolated, or eliminated. Phil K3TUF On 6/12/2011 2:40 PM, Dave Perry wrote: Yes, I get the wide birdie all the time on the P3, but I also hear it on the K3. I always figured it was something in the house. Dave, N4QS - Original Message - From: Phil Theis p...@k3tuf.com To: elecraft@mailman.qth.net Sent: Saturday, June 11, 2011 7:45 PM Subject: [Elecraft] P3 Broad Birdie Does anyone else get the wide birdie that floats around the P3 screen? This does not affect the operation of the K3, but does interfere with the display. Must be on the IF because it is never heard even when it is in the apparent bandwidth window. Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1382 / Virus Database: 1513/3698 - Release Date: 06/12/11 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 Broad Birdie
Does anyone else get the wide birdie that floats around the P3 screen? This does not affect the operation of the K3, but does interfere with the display. Must be on the IF because it is never heard even when it is in the apparent bandwidth window. Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3EXREF
I see talk of this external reference device. How does one get this? Nothing results in a search on the Elecraft website. Been waiting for this since K3 came out. Phil K3(352)TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 inverted on transverter
Is there something that I missed to invert the display when using a transverter with the P3? The spectrum displayed in the + region is really in the - region. Phil K3TUF K3/P3 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 / P3 firmware
Got new P3 and worked fine. Went to load new firmware. Gave error dialog that needed to turn off P3 Turned off P3 Now K3 is in mid stream says MCU LD K3 Utility is just looping saying Attempting to contact K3 at various speeds. Am I up the creek? What is my next step to get K3 back? Phil K3(352)TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 / P3 firmware
Thanks for the quick reply. I followed that procedure, but when I press K3 power on I get only MCU LD and tx red led blinking. How do I recover from this? Phil K3TUF On 10/16/2010 8:24 PM, Dick Dievendorff wrote: Disconnect p3 power plug. Remove K3 power by pulling its power plug. Stop K3 utility. Plug k3 power back in and press K3 power on. Do not power on P3. Start k3 utility and load K3 firmware. Then restore P3 power. Newest P3 manual has this info Dick, K6KR Sent from my iPhone On Oct 16, 2010, at 17:04, Phil Theisp...@k3tuf.com wrote: Got new P3 and worked fine. Went to load new firmware. Gave error dialog that needed to turn off P3 Turned off P3 Now K3 is in mid stream says MCU LD K3 Utility is just looping saying Attempting to contact K3 at various speeds. Am I up the creek? What is my next step to get K3 back? Phil K3(352)TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 / P3 firmware
How do I get the K3 Utility so stop attempting to contact the K3? I'm sure the MCU is only partially loaded. Every time I start the K3 Utility it just keeps trying to contact the K3. P3 is unplugged. Phil K3TUF On 10/16/2010 8:31 PM, Dick Dievendorff wrote: When you power the K3 power on, you should expect to see MCU LD and the tx red LED blinking because the MCU firmware needs to be completely loaded, and you probably loaded a partial load earlier. Just start the K3 Utility (but don't let the P3 power on) and load firmware. The k3 Utility should find the K3 in MCU LD state unless the P3 was turned on sometime after turning the K3 on. Dick, K6KR -Original Message- From: Phil Theis [mailto:p...@k3tuf.com] Sent: Saturday, October 16, 2010 5:27 PM To: Dick Dievendorff Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 / P3 firmware Thanks for the quick reply. I followed that procedure, but when I press K3 power on I get only MCU LD and tx red led blinking. How do I recover from this? Phil K3TUF On 10/16/2010 8:24 PM, Dick Dievendorff wrote: Disconnect p3 power plug. Remove K3 power by pulling its power plug. Stop K3 utility. Plug k3 power back in and press K3 power on. Do not power on P3. Start k3 utility and load K3 firmware. Then restore P3 power. Newest P3 manual has this info Dick, K6KR Sent from my iPhone On Oct 16, 2010, at 17:04, Phil Theisp...@k3tuf.com wrote: Got new P3 and worked fine. Went to load new firmware. Gave error dialog that needed to turn off P3 Turned off P3 Now K3 is in mid stream says MCU LD K3 Utility is just looping saying Attempting to contact K3 at various speeds. Am I up the creek? What is my next step to get K3 back? Phil K3(352)TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.862 / Virus Database: 271.1.1/3200 - Release Date: 10/16/10 02:34:00 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 / P3 firmware
Good for you on the concert. I'm out of options, just won't find the K3 P3 totally out of the line up. K3 off for minutes. Utility just doesn't find the K3. Serial cord is plugged in. Phil K3TUF On 10/16/2010 8:53 PM, Dick Dievendorff wrote: To stop the K3 Utility, click the red X at the top right, or on the File menu select Exit, or click somewhere in the K3 Utility window and then press Alt-F4 on the keyboard. Just like any other Windows program. After stopping the K3 Utility, turn the K3 off (remove its power plug), wait 30 seconds, then plug the K3 in again, press the power button, then start the K3 Utility program again. It should find the K3. Then load firmware with the K3 Utility. Don't reconnect P3 power until after you've successfully loaded K3 firmware. I'm about to run out for a symphony tonight (Bach's Brandenburg Concerti!), but I'll check on my iPhone from time to time... Dick, K6KR *From:* Phil Theis [mailto:p...@k3tuf.com] *Sent:* Saturday, October 16, 2010 5:44 PM *To:* Dick Dievendorff *Cc:* elecraft@mailman.qth.net *Subject:* Re: [Elecraft] K3 / P3 firmware How do I get the K3 Utility so stop attempting to contact the K3? I'm sure the MCU is only partially loaded. Every time I start the K3 Utility it just keeps trying to contact the K3. P3 is unplugged. Phil K3TUF On 10/16/2010 8:31 PM, Dick Dievendorff wrote: When you power the K3 power on, you should expect to see MCU LD and the tx red LED blinking because the MCU firmware needs to be completely loaded, and you probably loaded a partial load earlier. Just start the K3 Utility (but don't let the P3 power on) and load firmware. The k3 Utility should find the K3 in MCU LD state unless the P3 was turned on sometime after turning the K3 on. Dick, K6KR -Original Message- From: Phil Theis [mailto:p...@k3tuf.com] Sent: Saturday, October 16, 2010 5:27 PM To: Dick Dievendorff Cc:elecraft@mailman.qth.net mailto:elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 / P3 firmware Thanks for the quick reply. I followed that procedure, but when I press K3 power on I get only MCU LD and tx red led blinking. How do I recover from this? Phil K3TUF On 10/16/2010 8:24 PM, Dick Dievendorff wrote: Disconnect p3 power plug. Remove K3 power by pulling its power plug. Stop K3 utility. Plug k3 power back in and press K3 power on. Do not power on P3. Start k3 utility and load K3 firmware. Then restore P3 power. Newest P3 manual has this info Dick, K6KR Sent from my iPhone On Oct 16, 2010, at 17:04, Phil Theisp...@k3tuf.com mailto:p...@k3tuf.com wrote: Got new P3 and worked fine. Went to load new firmware. Gave error dialog that needed to turn off P3 Turned off P3 Now K3 is in mid stream says MCU LD K3 Utility is just looping saying Attempting to contact K3 at various speeds. Am I up the creek? What is my next step to get K3 back? Phil K3(352)TUF __ Elecraft mailing list Home:http://mailman.qth.net/mailman/listinfo/elecraft Help:http://mailman.qth.net/mmfaq.htm Post:mailto:Elecraft@mailman.qth.net This list hosted by:http://www.qsl.net Please help support this email list:http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG -www.avg.com http://www.avg.com Version: 9.0.862 / Virus Database: 271.1.1/3200 - Release Date: 10/16/10 02:34:00 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] W2 with dual sensors
Is there any way to have the W2 auto sense when there is output from one sensor to the other? Thanks, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Using Transverters
I use the K3 as an IF for transverters. This has worked well for some time now. I had originally used the 10 watt model, but recently upgraded by adding the 100 watt amplifier. Now the issue begins. 9 transverter slots are not enough for the bands I have; 50-24192MHz, which is 11 bands with two more coming some day. When I did not have the amplifier, there seemed to be no issue, I programmed the logging software to use an offset and the K3 ended up on 28MHz as it usually does, but without the actual frequency display. btw, thanks for the recent firmware mod to display the full frequency momentarily: (1296, etc) Now, with the amplifier, when I select one of the bands the radio seems to automatically assume that I am going to transmit full power on 10 meters. How can I instruct the radio to use the XVTR ports when not using trn1-9? Also, I could use more trn's. thanks Phil K3(352)TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3/100
I just installed the KPA3 and am experiencing ERR TXG in several of the lower bands. The Owners manual refers you to the Service Manual. Can't seem to find anything on the Elecraft site about a Service Manual. Any assistance appreciated. Phil K3(352)TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Room at Dayton
Please don't buy another room at Dayton till my prepaid room is taken. Super 8 Englewood, just off rt 70 and only minutes from Hara. $305 for Thursday, Friday and Saturday nights prepaid. Email me, Phil K3TUF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] External Reference
Has anyone heard of progress on the external reference feature being activated? thanks Phil K3TUF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 wish list - option to turn of display
Power was a consideration, but I just discovered the 'DAY' selection was what I was after, no light in a dark room. I believe we already have what I was looking for. Phil - Original Message - From: George Victor [EMAIL PROTECTED] To: Phil Theis [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Sent: Monday, April 28, 2008 9:20 AM Subject: Re: [Elecraft] K3 wish list - option to turn of display To save power? On Sun, Apr 27, 2008 at 7:38 PM, Phil Theis [EMAIL PROTECTED] wrote: This would be a great addition to the product. Phil K3(352)TUF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 wish list - option to turn of display
This would be a great addition to the product. Phil K3(352)TUF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] 50MHz Transverter
Given the following setup: K3 using transverters, with 50MHz transverter set for xv1. When I enter a 50MHz frequency via the com port the built in 50MHz receiver is selected. I then have to band up once to get to the xv1, then I can successfully band up to 144 etc. If I enter a 144 frequency, it immediately goes to xv2. What would it take to get a serial command to go to a frequency in 50MHz range to go directly to the xv1 selection? thanks Phil K3(352)TUF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] dsp2
Greetings, I just used the excellent firmware utility to upgrade the firmware. What is dsp2 and why is it n/a? thanks, Phil K3(352)TUF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] dsp2
Thank you, makes perfect sense. 73, Phil - Original Message - From: David Ferrington, M0XDF [EMAIL PROTECTED] To: Phil Theis [EMAIL PROTECTED]; Crafters elecraft@mailman.qth.net Sent: Thursday, February 28, 2008 7:15 AM Subject: Re: [Elecraft] dsp2 Its for the sub-receiver, so until its available, this doesn't do anything and if you don't have one in your K3, is n/a 73 de M0XDF / K3 #174 On 28/02/2008 12:11, Phil Theis [EMAIL PROTECTED] sent: Greetings, I just used the excellent firmware utility to upgrade the firmware. What is dsp2 and why is it n/a? thanks, Phil K3(352)TUF -- I don't mind that you think slowly but I do mind that you are publishing faster than you think. -Wolfgang Pauli, physicist, Nobel laureate (1900-1958) -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.21.1/1301 - Release Date: 2/27/2008 8:35 AM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 External Reference input
That's great, just what I want to hear. Just so it's on the road map. Didn't get that assurance from Gary. Thanks so much Lyle. We can wait for something good. 73, Phil K3(352)TUF - Original Message - From: Lyle Johnson [EMAIL PROTECTED] To: Philip Theis [EMAIL PROTECTED] Cc: 'Paul Christensen' [EMAIL PROTECTED]; elecraft@mailman.qth.net Sent: Friday, February 22, 2008 9:52 PM Subject: Re: [Elecraft] K3 External Reference input Now that I have the K3 I'd like to connect it to my GPS Spectracom. I want to slave it to my shack GPSDO, too -- and will! Some other parts of the K3 system have a higher priority at present, but given time... 73, Lyle KK7P -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.20.9/1294 - Release Date: 2/22/2008 6:39 PM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] ALC
Where is the ALC line? I need it to attach to 144 mhz amplifier. I have K2 only, no 100 watt option. Use the transverter interface for rf output. thanks Phil ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
