Re: [Elecraft] Dual Ptt

2018-11-06 Thread Ralph S. Turk
Hi all.
I use hard switching between the radios to the input of the KPA500 & KAT500. 
The Yaesu has +12vdc on the Ptt output except when it is transmitting, then it 
goes to ground.  Just looking for the simple way to 
switch PTT between the Yaesu 1000mp and the K3 as it goes to the KPA500 & the 
KAT500.
Ralph, W7hsg/AFA9RT

> On November 6, 2018 at 8:09 AM Don Wilhelm  wrote:
> 
> 
> Bob,
> 
> That is a simple solution, but how do you handle the RF output of both 
> transceiver to the single RF in on the amplifier?
> 
> The only caution I can give of with a configuration like that is for the 
> operator who uses voice modes with VOX turned on.
> Most ham mics are wired for VOX operation - in other words, the mics are 
> 'live'.  For those who use speakers too, the mic on the 'not in use' can 
> pick up the sound from the 'live' transceiver speaker and set it in 
> transmit mode.
> 
> The use of headphones will likely cause no problems, but the combination 
> of VOX ON with speakers live can cause a problem for voice modes.
> 
> My preference is for hard switching to eliminate a lot of "strange 
> happenings" - besides, I like to feel I am in control of such things.
> Such a switching arrangement can be easily built, but there are several 
> SO2R boxes that will accomplish the same thing.
> 
> 73,
> Don W3FPR
> 
> On 11/5/2018 3:30 PM, Bob McGraw K4TAX wrote:
> > I basically do the same with different radios.   The K3S is connected to 
> > the KAT500 and then through the KPAK3AUX cable to the KPA500.   The 
> > other radio has a Amp Key output basically an open collector to ground 
> > which I connect to the PA Key input.   Either radio will key the KPA500 
> > and no switching or changes required. Just cables and connectors. Adding 
> > the KAT500 requires a second KPAK3AUX cable and slightly different 
> > wiring configuration. However, with either radio, no other changes 
> > required.   Just be sure you have the correct drive power set and TUNE 
> > power set for each radio before hitting the PTT switch.
> > 
> > All this is very easy to accomplish with the cables and connectors 
> > provided by Elecraft.  The worst part is that hams "over think" the 
> > solution.
> > 
> > 73
> > 
> > Bob, K4TAX
> > 
> > 
> > On 11/3/2018 1:21 PM, Ralph S. Turk wrote:
> >> Hi all
> >>
> >> I need to be able to key the KPA500 & KAT500 from both a Yaesu 1000mp 
> >> and my K3.
> >>
> >> I assume (I know don't assume) I can use diodes to isolate both radios.
> >>
> >> Any thoughts?
> >>
> >> Ralph, W7HSG/AFA9RT
> >> __
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft@mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to rmcg...@blomand.net
> >>
> > 
> > 
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to donw...@embarqmail.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w7...@comcast.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Dual Ptt

2018-11-03 Thread Ralph S. Turk
Hi all

I need to be able to key the KPA500 & KAT500 from both a Yaesu 1000mp and my 
K3.  

I assume (I know don't assume) I can use diodes to isolate both radios.

Any thoughts?

Ralph, W7HSG/AFA9RT 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] KAT500

2018-08-12 Thread Ralph S. Turk
Can one use the 12vdc of the K3 to power the KAT 500?  The K3 has the latest 
update for the 12 dc.

Ralph, W7HSG/AFA9RT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Elecraft SSB Nets

2018-08-11 Thread Ralph S. Turk
What Day, time (gmt)
> On August 11, 2018 at 5:45 PM Phil Shepard  wrote:
> 
> 
> 
> Elecraft SSB Net 7-15-2018
> 
> WB9JNZ Eric IL K3 4017 Net Control
> 
> AE6JV Bill CA K3 6299
> 
> W7QHD Kurt AZ KX3 8697
> 
> KG7LOA Ted WA DRAKE R4C E4XB 1ST TIME CHECK IN
> 
> NS7P Phil OR K3 1826
> 
> WM6P Steve CA K3 8133
> 
> KE7AVO Paul IN K3S 11103 1ST TIME CHECK IN
> 
> K6VWE Stan MI K3 650
> 
> KC6ZKT Steve CA KX2 1432
> 
> VE6HDS Bryan AB K3S10007
> 
> N4NRW Roger SC K3 1318
> 
> K8NU Carl OH K3S 10099
> 
> K7BRR Bill OR K3S 10939
> 
> WB6QNS Jerry NM K3 7936 1ST TIME CHECK IN
> 
> K9PY Jerry IL K3 4023 1ST TIME CHECK IN
> 
> KC9USC Robert IL KX3 4460
> 
> 
> Elecraft SSB Net 7-22-2018
> 
> WB9JNZ Eric IL K3 4017 Net Control
> 
> N9SRA Steve IL ICOM 746
> 
> N4NRW Roger SC K3 1318
> 
> NC0JW Jim CO KX3 1356
> 
> W4DML Doug TN K3 6433
> 
> W7QHD Kurt AZ KX3 8697
> 
> N0MPM Mike IA KX3 8820
> 
> KC9USC Robert IL KX3 4460
> 
> W7REK Glenn AZ K3 2243
> 
> NA5C Steve TX K3S 10121
> 
> K6WVE Stan MI K3 650
> 
> KE7HGE Ken WA KX3 4540 
> 
> AI6B Brian CA KX2  ?
> 
> K8NU Carl OH K3S 10996
> 
> WA9SUG Al IL icom7700
> 
> 
> 8/5/2018 Elecraft SSB Net
> 
> 
> Call  NameLoc.Rig S/N
> WB9JNZ*   ERICWISCONSIN   IC7000
> NC0JW JIM KANSAS  KX3 1356
> K8NU  CARLOHIOK3S 10996
> K6VWE STANMICHK3  650
> W7REK GLENAZ  K3  2843
> KA0MBCSHERMAN MINNIC718
> N1RJK ROB NJ  756 P3
> W7QHD KURTAZ  KX3 8697
> NS7P* PHILOR  K3  1826
> KD0YSWKEN MINNKX3 1547
> W1NGA AL  COLOK3  5765
> KC6ZKTSTEVE   CALFIC7300/KPA500
> WM6P  STEVE   GA  K3S 11453
> W4JSH JEFFTN  K3  2378
> N6MEL MEL CALFK2  2410
> AF8M  RICKMICHK3S 11153
> WB0BEUSTEVE   COLOKX3 7048
> N7BDL TERRY   AZ  K3S 10373
> N2TNQ LEN NJ  K3  5270
> N3REB DALEPA  KX2 (8w)558
> WB6QNSTERRY   NM  K3  7936
> K7JG  JOHNWASHKX3 3519
> KM4QBCJEFFNC  TENTEC JUPITER
> 
> NET CONTROL
> N4NRW RODGER  SC  K3  1318
> 
> * RELAY STATIONS
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w7...@comcast.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] KAT500 & KPA 500

2018-08-06 Thread Ralph S. Turk
I have found a KPA 500.  Still looking for a used KAT 500
Ralph, W7HSG/AFA9RT

> On August 6, 2018 at 2:12 PM "Ralph S. Turk"  wrote:
> Hi all
> Looking for a used KAT 500 & KPA 500
> 
> Ralph, W7HSG
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w7...@comcast.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] KAT500 & KPA 500

2018-08-06 Thread Ralph S. Turk
Hi all

Looking for a used KAT 500 & KPA 500

Ralph, W7HSG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] K3S Comparison table finalized (link attached)

2018-07-07 Thread Ralph S. Turk
Wayne.
I would like to see a K3 upgraded version compared to the K3S and 7610.  I have 
the K3 sn4629 with new Syn 2nd rx using it on MARS alot.
Ralph, W7HSG/AFA9RT
> On July 7, 2018 at 10:05 AM Wayne Burdick  wrote:
> 
> 
> Our detailed, two-page comparison table between the K3S and IC-7610 is now 
> complete:
> 
>  http://www.elecraft.com/K3/K3S_comparison1.pdf
> 
> I’d like to thank everyone who reviewed the table for content and accuracy, 
> including several who own or have used both radios. Many of your suggestions 
> were incorporated. As a result, the table now captures those aspects of the 
> performance, portability, and user interface of the K3S that are most 
> important to current and prospective owners.
> 
> The table is an excellent starting point. If you still have unanswered 
> questions about K3S features, theory of operation, etc., feel free to email 
> me directly. (In fact, if you’re within driving distance of my QTH in 
> Belmont, CA, stop by for a demo :)
> 
> 73,
> Wayne
> N6KR
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w7...@comcast.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K-3 4629

2018-04-07 Thread Ralph S. Turk
Ordered thursday with the discount
> On April 7, 2018 at 6:07 PM Hisashi T Fujinaka <ht...@twofifty.com> wrote:
> 
> 
> Looks like there's a discount on Fred's book. I think that's a great
> thing to get if you don't have it already. I have two of them (two
> different versions.)
> 
> On Fri, 6 Apr 2018, Ian Kahn, KM4IK wrote:
> 
> > Ralph,
> >
> > If I may suggest, download and read the manual from the Elecraft web site, 
> > if 
> > you haven't already. Also, get a copy of Fred Cady's, K7EX, excellent book 
> > on 
> > the K3. It will help you understand the ins and outs of your transceiver.
> >
> > Also, the two pre-amps are new to the K3S, if I remember correctly. Our 
> > older-generation K3s don't have them.
> >
> > Enjoy your new rig! I love mine!
> >
> > 73 de,
> >
> > Ian, KM4IK
> > K3 #281
> >
> >
> > On 04/06/2018 05:04 PM, Ralph S. Turk wrote:
> >> Just got my K3 back from the factory.  Everything that I have tested works 
> >> correctly.
> >> 
> >> This week I say a email referring to Pre Amp 1 and 2.  I can't find 
> >> anything in the manual
> >> 
> >> so far.  Are there such items or am I not interpreting that email 
> >> correctly.  I should have saved
> >> 
> >> it but I didn't.
> >> 
> >> I also should state that I am very new to the K3.  Have only had for two 
> >> weeks.  Was from a estate
> >> 
> >> sale.
> >> 
> >> 
> >> Thanks
> >> 
> >> Ralph, W7HSG
> >> __
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft@mailman.qth.net
> >> 
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to km4ik@gmail.com
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to ht...@twofifty.com
> >
> 
> -- 
> Hisashi T Fujinaka - ht...@twofifty.com
> BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w7...@comcast.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] K-3 4629

2018-04-06 Thread Ralph S. Turk
Just got my K3 back from the factory.  Everything that I have tested works 
correctly.

This week I say a email referring to Pre Amp 1 and 2.  I can't find anything in 
the manual 

so far.  Are there such items or am I not interpreting that email correctly.  I 
should have saved

it but I didn't.

I also should state that I am very new to the K3.  Have only had for two weeks. 
 Was from a estate

sale.


Thanks

Ralph, W7HSG  
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] Re K3 Audio

2018-03-30 Thread Ralph S. Turk
Does any one know the command for both Mike in Front Panel and Line in rear 
panel?

I need both at the same time,  Mike for voice and Line in for digital.


Ralph, W7HSG/AFA9RT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] News Letters

2018-03-16 Thread Ralph S. Turk
Where does one find the News Letters?


Ralph, W7HSG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com