[Elecraft] USB/LSB with 5MHz VFO
Mr Hallas will be correcting his error in an upcoming edition of QST. Ray K3RIZ / This is a question in the December 2009 QST article The Doctor is Inon page 45. From the article: The subtractive translation reversed the frequency relations (and the VFO tuning direction) to result in LSB. The circuit design apparently saved quite a bit of cost in those days. Byron KI6NUL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 SSB TX BP Adjust
Would like to know if the adjustable transmit DSP bandpass is on the short list for inclusion in the menu. (Maybe I missed it in the manual?) I plan to use a narrow tx bandpass (400Hz to 2.6kHz) to have maximum power concentrated where many receivers have their effective receive passband. I'll most likely get a lot of time using the processor too. Compromise antennas and low power from my location call for these operating parameters to be engaged. It would also be good to go with a narrower passband when operating on 60M to stay well within the occupied bandwidth limits assigned to that band here in the U.S. Thanks. Ray Kiesel K3RIZ P.S. VERY nice operating manual! Great job! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Misc Photos of K3?
http://www.n4lcd.com/k3/ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Keyer
Will the early versions of the K3 internal keyer have Bug mode available (manual dah, generated dit)? Many thanks. Ray K3RIZ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] ESSB from a K3
Also, see the specs...4 kHz max. (Subject to change.) http://www.elecraft.com/K3/K3_specs.htm RayK3RIZ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Button Function
Can anyone, besides the K3 finalization team, explain the function of the K3 AFX button? Thank you. Ray K3RIZ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Button Function
Ed - W0YK P.S. As a K3 field tester, does that make me part of the K3 finalization team and therefore disqualified from answering the question? ;) Thank you Ed. Didn't want to incur any wrath for slowing down the team. :^) As I learn about the K3, I am amazed at the thought that went into the applications and ergonomics. You and the entire design/test team sure have done your homework! When the manual becomes available, I'm sure that I'll learn enough to hit the ground running when my rig arrives. Thank you again. Ray K3RIZ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Function Button Question
Would appreciate a confirmation... Are the three (hold - second function) buttons just above the B knob user programmable function keys? Thank you. Ray K3RIZ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 - 2.7 kHz Shape Factor
Can anyone give me the shape factor for the Elecraft supplied, 5 pole, 2.7 kHz filter? Thank you Ray K3RIZ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 passband shift question
Have been reading these threads and other Elecraft info on the K3 with much interest. A lot of good going on here wrt great engineering. One question to which I cannot find an answer... Assume that the DSP and crystal filters are normalized (NORM) with the DSP about the same BW as the crystal filter. If the DSP is only shifted (no change to width), does the crystal filter also track the shift (I would assume by using offsetting frequency shifts in the first and second mixer injection oscillators.) or will it step to the next larger bandwidth filter? Will the tracking feature be present in the first release of units in July? If not, could it be added by a future firmware update? Thank you. Ray / K3RIZ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com