Re: [Elecraft] Is the Lab599 TX500 a "rip-off" of the KX3?

2020-09-03 Thread Stephan Forth
The connectors are well known GX16/12 connectors which are used in the aviation 
market.

73, Stephan 

Am 3. September 2020 21:00:29 MESZ schrieb Grant Youngman 
:
>There are going to be a lot of nice little radios. This may be a really
>good radio.  Do you know that?  I don’t.
>
>Personally, I wouldn’t touch this thing with a 10 ft pole.  No battery;
>no ATU; unknown specs; unknown, if any, support; non-standard
>connectors that won’t fit anything else;  and on.  It looks “cool”, and
>that will certainly appeal to some.  But it’s more than the radio that
>has to be carried in the end, and doesn’t come from a trusted source
>with a track record.  Will you be able to read the display in the
>sunlight?
>
>Grant NQ5T
>
>> On Sep 3, 2020, at 2:30 PM, Bill Frantz 
>wrote:
>> 
>> It is certainly not a clone. It draws more RX current. It is a
>thinner. The panadapter is built in.
>> 
>> I didn't spend enough time looking at it to form a judgement other
>than it appeals to the same uses as the KX3 and is not a clone.
>> 
>> 73 Bill AE6JV
>> 
>> On 9/3/20 at 1:58 PM, johna...@gmail.com (John Harper) wrote:
>> 
>>> As someone who has one of these radios on order, I'd like to know if
>this
>>> is fake news or true fact:
>>> 
>>> "This rig is copied from the KX-3. I was told this from a reliable
>source
>>> inside Elecraft."
>>> 
>>> Source:
>>>
>https://forums.qrz.com/index.php?threads/lab599-discovery-tx-500.683461/page-2
>>> 
>
>__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to df...@darc.de 

-- 
Stephan Forth
DF6PA, DOK: K07
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KX2 TX "Sticks On" in FT8?

2019-08-09 Thread Stephan Forth
Hi

I had the same problem. I turned down the volume slider on the computer a 
little and the LED went out and the KX2 was in receive mode again.
I don't know why. Vox was turned off.

73 Stephan, DF6PA

Using Raspberry and MiniProSC Audio adapter. PTT handled by CAT control.

> MaverickNH  hat am 9. August 2019 um 13:32 
> geschrieben:
> 
> 
> While running FT8 on my KX2/KXPA100, the TX red LED will sometimes stay on
> and the FT8 waterfall shows blank (like when TXing). ALC is stuck on 1 Bar
> when I've got it set 4-5 Bars. If I click Tune in WSJT-X once or twice I see
> the 4-5 Bars ALC and then all returns to normal.
> 
> Is TX being "Stuck On" my KX2 or WSJT-X acting up? Using Win 10 and a
> Soundblaster Play! 3 USB audio adaptor.
> 
> Bret/N4SRN
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to df...@darc.de
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] WSPR with KX3 and WSPR_Beacon/Android

2019-07-27 Thread Stephan Forth
Did you took care about the time?
You should start exactly 2 seconds after an even minute.

73 Stephan

Am 27. Juli 2019 22:05:02 MESZ schrieb Ignacy :
>I am trying to use WSPR Beacon under Android with KX3 for Android to
>check
>antennas. The beacon transmits and the signal appears but there are no
>reports. K3 with WSPR under WSJT works fine.
>
>I tried USB and data modes. 
>
>Ignacy, NO9E   
>
>
>
>--
>Sent from: http://elecraft.365791.n2.nabble.com/
>__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to df...@darc.de 

-- 
Stephan Forth
DF6PA, DOK: K07
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] OT - A Personal Note

2019-06-12 Thread Stephan Forth
Ted

All the best. Always a bad feeling when a ham has had bad luck.

73 Stephan, DF6PA

-- 
KX2 

Am 12. Juni 2019 22:59:05 MESZ schrieb "Dauer, Edward" :
>
>Hello All –
>
>Writing on Day 11 after a severe hemorrhagic stroke, now in the
>Spalding Rehabilitation Hospital in Denver – a city blessed with more
>than its share of world-class medical specialization, including
>Spalding.  Hemmorhage was in the medulla in the brain stem, a place
>where – by way of crude analogy – much of the final digital to analog
>neural translation occurs for almost everything left of midline.
>
>It hit me as I was about to leave for a weekend at my operating QTH. 
>Two days in a general hospital ER; three in a neural-intensive care
>unit at the next hospital, where my friend and yours Fred Cady KE7X
>passed away just a couple of weeks ago; then a transfer here where I am
>trying to learn how to stand up and walk again.  Fine motor control in
>left hand is gone – so probably not able at present to send with right
>fist and turn the Big Knob with the left.
>
>Sorry, Eric and Wayne;  my K4 order will have to wait.
>
>Yes this is OT, but I have always thought of the group on this
>reflector as friends even if  most of them I haven’t personally met
>yet.  And this is the kind of news one shares with friends; not a CQ
>for well wishes on-list.  In any case, it will explain an
>uncharacteristic silence -- after this note.  (Typing by searching for
>one letter at a time is awkward and slow.)
>
>KN1CBR is not QRT.  Merely TU, AR K.
>
>CUAGN & 73,
>
>Ted, KN1CBR
>
>__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to df...@darc.de 

-- 
Stephan Forth
DF6PA, DOK: K07
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com