Re: [Elecraft] K4 Delivery?
I guess we need a "no troll" policy as well. A mis-leading subject line. No Elecraft content in the body of the email. A link that leads to a politicized article. That is the definition of a troll email. Nothing about the K4 to be found... The wrong person apologized in this thread. 73, Steve W1SRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [OT] Fires
Can we please get back to Elecraft topics. On 10/14/2020 20:39, Mike Short wrote: Years of mismanagement contribute to the fires. Forest Service and states have not culled dead trees, allow logging, and not done controlled burns to reduce the fuel. Building homes in canyons with Santa Ana winds also does not help. Until there is a serious change in how forests are managed, this will be a normal occurrence On Wed, Oct 14, 2020 at 22:06 David Gilbert wrote: I think you have a skewed view of the situation, probably understandably so given your own vulnerability to that fire. I can find tons of media information specifically on the Bobcat Fire with almost daily datelines when I do a Google search, and I know from personal experience with wildfires here in southern Arizona that agencies have to prioritize literally on an hour by hour basis how and where they deploy scarce resources. Slurry bombers are about the only effective countermeasures in rough terrain (and even then only partially), since sending fire crews into those areas is pure and simple murder. Here where I live (dry grass, dry trees, hilly terrain) the aircraft (slurry bombers, helicopter water drops) try to slow the fires while the fire crews mostly just dig in their heels and try to save the homes ... and there isn't much point in them doing so until the homes are actually threatened. The fire that whipped through this area in 2011 burned EVERYTHING within about 50 feet of my home, but the fire crews wouldn't back off and they saved the house. If you can find the Google Earth satellite pictures from July 2011 you can see what I mean (my .kml info is available from QRZ.com page) ... everything is black except for a cone where my house is at the pointed end of the cone. With 4 million acres on fire in California within a short period of time I think it's unrealistic of you to think that there will ever be enough resources in reserve to cover everything in a situation like that ... at least not when you would like. Dave AB7E On 10/14/2020 1:52 PM, Al Lorona wrote: So I read not only K6XX's report, but the entire issue of the Jug. http://nccc.cc/jug/2020/09sep2020.pdf . I am completely floored by the complete destruction of Bob's place. Bob, I don't know if you're a believer, but I for one am praying for strength for you, my friend. My impression of the Bobcat fire here in Los Angeles, which got to within 2 miles from me and is still burning 38 days later, is similar to Bob's: fire agencies simply let it burn for days without any urgency whatsoever, letting it advance into backyards in the northernmost reaches of Arcadia and Monrovia before kicking into firefighting high gear at the last possible second. In strangely similar fashion, the news media never really reported with any energy on the Bobcat fire. I still can't understand the almost total ignoring of this fire for so long. So I resonated with Bob on this point, and for this reason I refute W6GJB's claim that resources assigned to southern California deprived northern California of the same. It seems that *nobody* had the resources they needed. What a shame. Hang in there, Bob. Please let us know if you've started a gofundme page or something like that. Al W6LX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ai4ns.m...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w1...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Congrats to the Elecraft Team on K4 Ship
Facing many headwinds the team got the first batch out the door with what looks to be the new platform for serious HF operators. Well done to everyone involved and looking forward to seeing this product evolve and improve. Shipping any product is a tremendous amount of work and the Elecraft team has done it many times. Rare indeed. 73/GL, Steve W1SRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] FS: Non Working KSB2 + KSB2 MOD KIT
Sold. 73, Steve W1SRD It doesn't work. I don't know why. It has all components installed. It was years ago and I was in KH6 for work. It was faster for me to build another KSB2 (they were a lot cheaper then!) so I could get on the air quickly. Old style crystals. Firmware 1.04. D1 and D2 have one lead lifted probably as part of troubleshooting. Includes new PSK-31 upgrade mod kit still in the bag. Yours for $50 plus $10 postage USPS Priority mail. Sold AS-IS. 73, Steve W1SRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w1...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: Non Working KSB2 + KSB2 MOD KIT
It doesn't work. I don't know why. It has all components installed. It was years ago and I was in KH6 for work. It was faster for me to build another KSB2 (they were a lot cheaper then!) so I could get on the air quickly. Old style crystals. Firmware 1.04. D1 and D2 have one lead lifted probably as part of troubleshooting. Includes new PSK-31 upgrade mod kit still in the bag. Yours for $50 plus $10 postage USPS Priority mail. Sold AS-IS. 73, Steve W1SRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4 Questions
I hope they follow Flex Radio's lead and have something similar to DAX to share out the audio. Really makes it clean and easy. The idea of having to connect another SDR is so 2000. 73, Steve W1SRD (In the dark in ELDO county waiting for PG) On 8/14/2020 21:01, Bob Wilson, N6TV wrote: On Tue, Aug 11, 2020 at 5:51 PM Barry LaZar wrote: is the pan presentation fixed as to frequency span or can the frequency span be adjusted; I typically use 25-50 KHz on CW or less on data modes. Span and center frequency are adjustable. Fixed or tracking mode is available. Scrolling mode (to prevent VFO cursor from going off screen) has different options, similar to P3: full page, half page, slide, etc. Next can the xvter IF out be used as the IF out on the K4D? Probably it will work the same as a K3. Or, is the I available for use o0n applications like CW Skimmer; This requires a MME format. I don't think that will work. Connecting a separate SDR to RX ANT OUT would be a simpler way to do it. A program like HDSDR can keep the SDR frequency in sync with the K4 frequency. 73, Bob, N6TV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w1...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Much Better Than Spectrogram
Just watched Dave's video on the Classic Line from yesterday and the question of filter alignment software came up. I found what I think is a far better program than Spectrogram for K2 filter alignment. Have a look at Friture. (www.friture.org) It's currently under development, has more features, runs on all platforms and is open source. All good. 73, Steve W1SRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KRX3A + Filters for Sale - Stripping my K3
Everything sold but the KFLA-1.8K. Reduced to $115 shipped. Hope to CU tomorrow on the NAQP CW. 73, Steve W1SRD In process of turning my K3 into a minimalist expedition radio and taking the following out of it. Filters: 1 KFL3A-1.8K $130 shipped 1 KFL3A-400 $130 shipped 2 KFL3C-200 (matched pair) $235 shipped KRX3A with KFL3A-2.8K purchased new 8/2016 $580 shipped. Includes all hardware except the circular foam pad for the back of the speaker which is easy to substitute. *Note: If you have a K3 (not S) the KRX3A requires the KSYN3A synthesizer upgrade. * Paypal OK. Shipped USPS Priority. 73, Steve W1SRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w1...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] SOLVED Radiosport MH-350ADJ with K2?
Thanks Don, I already knew the basics of a resistor between pin 1 and 6 from a simple google search, but I suspected there was more to the story with the Radiosport headset. And there is. After conferring with Dave, WI6R and super helpful owner, there is already a resistor inside the CS6-ELK cable and two dip switches to control whether to provide bias to the mic element. Some blocking and filtering is also part of the circuit. The only thing I needed to do to the radio was to wire wrap from pin 6 to pin 5 on the K2 mic header to provide 5V at the mic jack pin 5 in the fashion of a Kenwood radio. Pin 6 was not connected at the mic jack. The CS6-ELK cable needs the provided bias to act like a Kenwood, not a K2. Then set the DIP switches and it works great. Now 1 cable and 1 mic element for both the K2 and K3! I've copied the circuit image inline, I just don't know if the reflector filters them out. If so, be happy to email it direct. Yet another reason why the RS headsets are so darn good and well thought out. 73, Steve W1SRD On 7/26/2020 4:39 PM, Don Wilhelm wrote: Steve, I am not familiar with that particular mic element, but -- If that is a dynamic mic element, no resistor should be used. If it is an electret type, the normal 5.6k resistor should work fine, it is not critical - anything between 5.6k and 10k will do fine. 73, Don W3FPR On 7/26/2020 7:01 PM, Steve Dyer W1SRD via Elecraft wrote: Is anyone using this mic element with the K2? If so, what size resistor did you use between MIC pin 1 and 6? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Radiosport MH-350ADJ with K2?
Is anyone using this mic element with the K2? If so, what size resistor did you use between MIC pin 1 and 6? TU/73, Steve W1SRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] For Sale: K2 DSP Filter KDSP2
I dug out my K2 during shack cleanup and was going to sell it but it's been great fun to play with and decided to keep it. Maybe a bit of nostalgia and also remembering pain and joy of the build process :-). Selling just the KDSP2. It works great, but I prefer the sound and simplicity of the KAF2. Side by side the KDSP2 compared very favorably with a Timewave DSP-599zx with v5 firmware. Includes the manual, control board headers and mounting hardware. Note: The K2 MCU must be 2.01 or greater. $225 (firm) shipped. PayPal preferred. 73, Steve W1SRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KRX3A + Filters for Sale - Stripping my K3
In process of turning my K3 into a minimalist expedition radio and taking the following out of it. Filters: 1 KFL3A-1.8K $130 shipped 1 KFL3A-400 $130 shipped 2 KFL3C-200 (matched pair) $235 shipped KRX3A with KFL3A-2.8K purchased new 8/2016 $580 shipped. Includes all hardware except the circular foam pad for the back of the speaker which is easy to substitute. *Note: If you have a K3 (not S) the KRX3A requires the KSYN3A synthesizer upgrade. * Paypal OK. Shipped USPS Priority. 73, Steve W1SRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3/0 Mini For Sale
Elecraft K3/0 Mini in excellent condition. Includes cable E980263from RRMINICBL to connect to the Remote Rig RRC-1258. No longer available from Elecraft. $500 shipped in original box. 73, Steve W1SRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2 and K3 Key/Phone Connections
No longer available for individual sale... Steve W1SRD Hello Don, From the commercial side, I use the NCS 3240 Multi Switcher. Numerous input devices, up to 4 radios. Individual level settings, etc. Love it. http://www.ncsradio.com/m_switch.html 73, Terry, W0FM -Original Message- From: Don KB1YBG [mailto:thompsond...@gmail.com] Sent: Wednesday, July 18, 2012 11:13 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K2 and K3 Key/Phone Connections Hi All, Now that I've added a K3 the plugs for Key and Headphones have changed to 1/4 I'm thinking about building a connection central box with a rig selection switch to switch these to the desired rig. I currently have four rigs and plugging / unplugging these doesn't make sense, let alone the fact that plug sizes differ. Any ideas about doing this? Any commercial solutions? At this point I'm only interested in Keys/Paddles and headphones. If I do any data modes it most likely would be only with K3. Thanks, Don -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-and-K3-Key-Phone-Connections-tp7559376.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K2/100 For Sale
This was a project that got set aside and just recently finished. K2 base with all updates and latest firmware (2.04 MCU and 1.09 IOC) S/N 2388 Includes K2ATOBKT, K2KEYMODKT, BFOMDKT, E850006, XFILMDKT KPA100 - just built with latest mods KPA100UPKT and KPA100SHLDKT KSB2 - just built with matching crystal set KNB2 KAF2 - unbuilt KDSP2 - unbuilt KAT100-1 - just built Just professionally aligned April 2012 by Don Wilhelm. He also installed the key click mod. Full doc upon request. All manuals. Radio is hardly used. Works perfectly. Over $2000 spent on this radio. $1349 well packaged shipping included. Reply off list to w1...@arrl.net. 73, Steve __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K2] Re: Was Working Fine... Then HiCur
Any suggestions or areas I can investigate from anyone? 73, Steve From: Steve Dyer sd...@pacbell.net To: Elecraft@mailman.qth.net Sent: Tue, April 3, 2012 8:35:04 AM Subject: [Elecraft] Was Working Fine... Then HiCur K2 new/old build. S/N is 2338, built base K2 and KNB2 10 years ago, put away and only finished up recently with KPA100, KAT100 and KSB2. On air for couple weeks with good results. Suddenly starts giving intermittent HiCur messages yesterday. Tore out KPA100 and KSB2. -Occurs on all bands tested (40, 30, 20, 17, 12, 10) (no dummy load, but checked R with Rig Experts AA-54 and tested close to 50 ohm points with almost no Z). -Happens with Tune or keying at all power settings -Message displays at key-up when hand keying/tune, will happen quickly with keyer and then fold-back power. -Cal Cur is 3.5A -Measured power output with external wattmeter (SX-200) and power tracked fairly closely to setting -Will not happen if power is lowered to -Checked power supply output voltage with DMM and it matches the K2 display voltage +.4V. PS is set to 14V. -Current draw on 40M @ 12W is 2.3A 13.1V (.5V drop), 17M @ 12W = 3.44A 12.9V (.7V drop) -On 40M Q7 Base is .611V Q8 is .612V -Completely disassembled and visually inspected all solder with magnifying glass and re-heated common transformers and chokes in final. Re-seated IOC and MCU (lifted slightly and pushed back into socket). -Checked T4 windings -Have done the DC voltage tests suggested in the various threads about HiCurr and everything looks normal. 73, Steve W1SRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K2] Re: Was Working Fine... Then HiCur
Thanks Ron. Yes, Don replied and suggested some things to look at (thanks Don!). And yes, it does it when the KPA100 is removed. 73, Steve W1SRD From: Ron D'Eau Claire r...@cobi.biz To: Steve Dyer sd...@pacbell.net; Elecraft@mailman.qth.net Sent: Wed, April 4, 2012 2:50:46 PM Subject: RE: [Elecraft] [K2] Re: Was Working Fine... Then HiCur Don, W3FPR, will have suggestions. He must be away today, but he services K2's and K2/100's and has done so for many years. He is an invaluable resource on this reflector. One question: Does it do the fault with the KPA100 removed? That will tell you which part of the K2 to start looking in. Ron AC7AC -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Steve Dyer Sent: Wednesday, April 04, 2012 12:03 PM To: Elecraft@mailman.qth.net Subject: [Elecraft] [K2] Re: Was Working Fine... Then HiCur Any suggestions or areas I can investigate from anyone? 73, Steve From: Steve Dyer sd...@pacbell.net To: Elecraft@mailman.qth.net Sent: Tue, April 3, 2012 8:35:04 AM Subject: [Elecraft] Was Working Fine... Then HiCur K2 new/old build. S/N is 2338, built base K2 and KNB2 10 years ago, put away and only finished up recently with KPA100, KAT100 and KSB2. On air for couple weeks with good results. Suddenly starts giving intermittent HiCur messages yesterday. Tore out KPA100 and KSB2. -Occurs on all bands tested (40, 30, 20, 17, 12, 10) (no dummy load, but checked R with Rig Experts AA-54 and tested close to 50 ohm points with almost no Z). -Happens with Tune or keying at all power settings -Message displays at key-up when hand keying/tune, will happen quickly with keyer and then fold-back power. -Cal Cur is 3.5A -Measured power output with external wattmeter (SX-200) and power tracked fairly closely to setting -Will not happen if power is lowered to -Checked power supply output voltage with DMM and it matches the K2 display voltage +.4V. PS is set to 14V. -Current draw on 40M @ 12W is 2.3A 13.1V (.5V drop), 17M @ 12W = 3.44A 12.9V (.7V drop) -On 40M Q7 Base is .611V Q8 is .612V -Completely disassembled and visually inspected all solder with magnifying glass and re-heated common transformers and chokes in final. Re-seated IOC and MCU (lifted slightly and pushed back into socket). -Checked T4 windings -Have done the DC voltage tests suggested in the various threads about HiCurr and everything looks normal. 73, Steve W1SRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Was Working Fine... Then HiCur
K2 new/old build. S/N is 2338, built base K2 and KNB2 10 years ago, put away and only finished up recently with KPA100, KAT100 and KSB2. On air for couple weeks with good results. Suddenly starts giving intermittent HiCur messages yesterday. Tore out KPA100 and KSB2. -Occurs on all bands tested (40, 30, 20, 17, 12, 10) (no dummy load, but checked R with Rig Experts AA-54 and tested close to 50 ohm points with almost no Z). -Happens with Tune or keying at all power settings -Message displays at key-up when hand keying/tune, will happen quickly with keyer and then fold-back power. -Cal Cur is 3.5A -Measured power output with external wattmeter (SX-200) and power tracked fairly closely to setting -Will not happen if power is lowered to -Checked power supply output voltage with DMM and it matches the K2 display voltage +.4V. PS is set to 14V. -Current draw on 40M @ 12W is 2.3A 13.1V (.5V drop), 17M @ 12W = 3.44A 12.9V (.7V drop) -On 40M Q7 Base is .611V Q8 is .612V -Completely disassembled and visually inspected all solder with magnifying glass and re-heated common transformers and chokes in final. Re-seated IOC and MCU (lifted slightly and pushed back into socket). -Checked T4 windings -Have done the DC voltage tests suggested in the various threads about HiCurr and everything looks normal. 73, Steve W1SRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K2] - Was Working... Then HiCur
K2 new/old build. S/N is 2338, built base K2 and KNB2 10 years ago, put away and only finished up recently with KPA100, KAT100 and KSB2. On air for couple weeks in KH6 with good results. Suddenly starts giving intermittent HiCur messages yesterday. Tore out KPA100 and KSB2. -Occurs on all bands tested (40, 30, 20, 17, 12, 10) (no dummy load, but checked R with Rig Experts AA-54 and tested close to 50 ohm points with almost no Z). -Happens with Tune or keying at all power settings -Message displays at key-up when hand keying/tune, will happen quickly with keyer and then fold-back power. -Cal Cur is 3.5A -Measured power output with external wattmeter (SX-200) and power tracked fairly closely to setting -Will not happen if power is lowered to -Checked power supply output voltage with DMM and it matches the K2 display voltage +.4V. PS is set to 14V. -Current draw on 40M @ 12W is 2.3A 13.1V (.5V drop), 17M @ 12W = 3.44A 12.9V (.7V drop) -On 40M Q7 Base is .611V Q8 is .612V -Completely disassembled and visually inspected all solder with magnifying glass and re-heated common transformers and chokes in final. Re-seated IOC and MCU (lifted slightly and pushed back into socket). -Checked T4 windings -Have done the DC voltage tests suggested in the various threads about HiCurr and everything looks normal. Have another few days here, would be nice to get back on the air if anyone has an idea. 73, Steve W1SRD/KH6 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html