[Elecraft] Cheap and Easy SDR
I've been watching and waiting for someone to broach this subject. Bob Nickels, W9RAN, wrote an article in January QST about using the DVB-T dongle as an SDR. Anyone looked at using this for a spectrum display on the K3? Thoughts? 73, Wayne N1WR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] W2 - Scan Function Not Working
Sometime during CQWW the scan function on my W2 quit working. Did a search on the archives, but no answers. W2 works fine in all other respects, but I have to manually switch it between sensors. Any help? Wayne N1WR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] help with DX4WIN
Problem solved - thanks to Dave, N4QS. Under CONFIG CW WGHT - tapping 5 toggles between VFO offset on SSB/CW mode change (VFO OFS) or no offset (VFO NOR, default). After Dave pointed this out I went to the pdf version of the manual and sure enough - it included this option. I guess I need to toss the old (outdated) hard copy manual I got with the radio! 73, Wayne Wayne Rogers wrote: > Thanks to all the responders. Unhappily I haven't yet found the problem: > Here's what's been suggested: > > "I would wager that you have your CW pitch set to 650 Hz, either in the > K3 > or in DX4WIN or both." I believe it is set to 650, but I can't find > anything that would cause the spot offset. > > "Try changing CONFIG CW WGHT. TAP1 to not have CW+SSB in the window." I > tried this with the settings of both CW+SSB and CW-SSB but didn't fix the > problem. > > "Turn CONFIG: VFO OFS - OFF." It was OFF. > > "What version of K3 software are you using?" MCU 04.22, FPF 01.14, DSP1 > 02.70 ( all current). > > Thanks to all, > > Wayne N1WR > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] help with DX4WIN
Thanks to all the responders. Unhappily I haven't yet found the problem: Here's what's been suggested: "I would wager that you have your CW pitch set to 650 Hz, either in the K3 or in DX4WIN or both." I believe it is set to 650, but I can't find anything that would cause the spot offset. "Try changing CONFIG CW WGHT. TAP1 to not have CW+SSB in the window." I tried this with the settings of both CW+SSB and CW-SSB but didn't fix the problem. "Turn CONFIG: VFO OFS - OFF." It was OFF. "What version of K3 software are you using?" MCU 04.22, FPF 01.14, DSP1 02.70 ( all current). Thanks to all, Wayne N1WR > On 1/11/2011 1:58 PM, Wayne Rogers wrote: >> I got no help from the DX4WIN reflector on this. Maybe (hopefully) >> someone here can help? >> >> I use DX4WIN 8.08 and a K3. I have been experiencing an oddity that I >> have >> not been able to resolve: >> >> With K3 tuned to 3500.0, if I double click on a spot at 3503.5 the K3 >> goes >> to 3503.5. No problem. >> >> With the K3 in the CW portion of the band (e.g. 3503.5) if I double click >> on >> a spot at 3800.0 the K3 goes to 3800.65. >> >> With the radio in the SSB portion of the band (e.g. 3800.0) if I double >> click on a spot at 3503.5 the K3 goes to 3502.85. >> >> I am getting a 650 Hz offset whenever the K3 changes modes. This happens >> in >> DX4WIN, but not in N1MM. >> __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] help with DX4WIN
I got no help from the DX4WIN reflector on this. Maybe (hopefully) someone here can help? I use DX4WIN 8.08 and a K3. I have been experiencing an oddity that I have not been able to resolve: With K3 tuned to 3500.0, if I double click on a spot at 3503.5 the K3 goes to 3503.5. No problem. With the K3 in the CW portion of the band (e.g. 3503.5) if I double click on a spot at 3800.0 the K3 goes to 3800.65. With the radio in the SSB portion of the band (e.g. 3800.0) if I double click on a spot at 3503.5 the K3 goes to 3502.85. I am getting a 650 Hz offset whenever the K3 changes modes. This happens in DX4WIN, but not in N1MM. Neither RIT nor XIT are on. Anyone have an idea where this is coming from? Thanks, Wayne, N1WR, K3 s/n 1945 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html