[Elecraft] Greetings

[Barry Middleton via Elecraft]

May I wish all readers on the list a Merry Christmas and a Happy New 
Year, and a healthy 2023.



--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K2 LCD dsisplay problem?

[Barry Middleton via Elecraft]

Good morning, I would like some help in resolving a problem with my K2. 
The rig is receiving and transmitting


with no problem, but the indicator for LSB, USB, CW etc is not working. 
I am able to change mode ok but have to rely


on my ears to tell me witch mode I am on. On the display I see one 
vertical bar, press mode button mode changes


and the display shows two vertical bars. Is this a display fault or 
should I look somewhere else?


   Thanking you in advance, and my best wishes to all on this 
reflector,


            Barry Middleton G4DBS


--
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KX3 failure of speaker in KX3 #27**

[Barry Middleton via Elecraft]

Good Morning,

                            I would like some help or advice to solve 
my KX3 speaker problem.


My problem is that the speaker is silent, headphones work ok, as a 
workaround I am


using a powered speaker. Looking at the circuit for the audio output I 
feel that the


headphone socket is not switching back to the speaker, the speaker is ok.

Due to my fingers not being as nimble as they used to be I feel that I 
should get someone


else to do the repairs, maybe the UK agent.

    Thanking you in advance,

            Barry G4DBS



---
This email has been checked for viruses by AVG.
https://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] [eelcraft] KX3 Low Volume

[Barry Middleton via Elecraft]

I have been using  a Jabra powered speaker for some time now with no 
problems. They have a built in battery chargeable via a mini USB socket, 
also


have blue tooth connectivity if required. They measure 5 inches wide, 
2.3 inches high and 2.1 inches deep, so small enough to slip into a pocket


if you are going portable in the field. I purchased mine when the built 
in speaker of my KX3 stopped working, the speaker is ok, I suspect it is


the headphone socket failure. I don't know if these speakers are 
available in the USA but I would think so.


   Barry G4DBS


---
This email has been checked for viruses by AVG.
http://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] [elecraft] KXPA100 KXATU PX3

[Barry Middleton]

At long last I have got round to assembling my KXPA100, KX3ATU and the 
PX3. The only slight problem that I had was with the PX3 as 79 year old 
fingers don't work as good as they use to. However after a thorough 
check to make sure all was correct, I connected it all up, power on and 
all worked fine. I would like to thank the Elecraft team for a firt 
class product and the help that is available on this reflector.


73 de Barry G4DBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] FTDI to serial adapter for K3 with Windows 7

[Barry Middleton]

I use Windows XP Home on the shack computer and have the same effect on 
boot up, I do not onw a K3 but it cycles the PTT on my Elecraft K2 & 
KX3, also my Icom IC7000. As a matter of interest and out of curiosity I 
have just booted up my Raspberry Pi 2 system and it does not activate 
the PTT.  As there has been no mention of other operating systems I 
presume it is a Windows only effect. May I wish everyone on this list a 
very happy Christmas especially Eric, Wayne and all at elecraft,

73 Barry G4DBS

On 13/11/2015 09:30 PM, elecraft-requ...@mailman.qth.net wrote:

Message: 1
Date: Thu, 12 Nov 2015 14:40:13 -0500
From: "James Setzler"
To:
Subject: [Elecraft] Subject:  FTDI to serial adapter for K3 with
Windows 7
Message-ID:<005101d11d81$f36b57a0$da4206e0$@verizon.net>
Content-Type: text/plain;   charset="US-ASCII"

My Win7 Ultimate has done this forever.  Simple solution:

  


1.   Turn on the computer.

2.   Turn on the radio.

  


 73 James K1SD


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KX3 2metre module installation

[Barry Middleton]

Hello,
   Just have to say that the installation of the 2 metre module 
in my KX3 went very smoothly, even these 78 year old hands managed the 
mini co-ax connectors. However when it came to upgrading the firmware I 
had a small problem, the MCU 2.23 installed with no problem, but Mr 
Murphy stepped in on the DSP 1.30, in the middle of loading I suffered a 
power cut, it didn't like that one bit. Still after the power returned 
all went smoothly. The sensitivity is far better than my other 2 metre 
rigs, so thank you Elecraft for a first class product.


73 de

Barry k Middleton G4DBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] 4 metre module (70 Mhz) module possible for the KX3

[Barry Middleton]

Hello Wayne,
Thank you for the information on the 2 metre 
module for the KX3, I will be ordering one on Friday 16th. I would also 
be interested in a 4 Metre module as that band is getting very popular 
in region1. Just an idea Wayne, would it be possible to have it mounted 
in a seperate enclosure, so as to avoid opening up the KX3 to change 
bands. Just my thoughts and I realise it may not be possible for 
technical reasons. May I wish you and all at Elecraft a sucessful time 
at Dayton.


73,
Barry G4DBS
On 09/05/2014 02:17, elecraft-requ...@mailman.qth.net wrote:

Message: 28
Date: Thu, 8 May 2014 17:57:11 -0700
From: Wayne Burdickn...@elecraft.com
To: Elecraft Reflectorelecraft@mailman.qth.net,
k...@yahoogroups.com  k...@yahoogroups.com
Subject: [Elecraft] 4-Meter (70 MHz) module possible for the KX3
Message-ID:d3d7bb19-5c7b-4f90-9074-d4fb20104...@elecraft.com
Content-Type: text/plain; charset=us-ascii

Hi all,

We'll be taking orders for the KX3-2M module, at Dayton and via the web, 
starting next Friday, May 16th. (Please don't call Elecraft about this yet -- 
we won't be set up to take orders until then.)

Meanwhile, we're thinking about doing a 4-meter version. 4 meters is not 
available in the U.S., yet, but it is available in many countries in ITU region 
1 (Europe, Africa, Middle East, etc.). For details, see:

http://en.wikipedia.org/wiki/4-meter_band.

A KX3-4M would be identical to the 2-meter version, with about 3 watts output, 
a very low noise figure, and all-mode operation. It would use the same PCB, 
requiring only component changes. Unfortunately there isn't room for both 2- 
and 4-meters on one module.

Any interest in a KX3-4M?

73,
Wayne
N6KR





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Re: KX3 Accuracy of clock

[Barry Middleton]

I have had my KX3 since the beginning of the year and I have not reset 
the clock since, and it is now 4 minutes ahead of the actual time. I'll 
leave it until next year and see how it goes.

May I wish everyone a Merry Christmas and a Happy New Year.

Barry G4DBS
On 03/12/2013 04:30, elecraft-requ...@mailman.qth.net wrote:

Send Elecraft mailing list submissions to
elecraft@mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/elecraft
or, via email, send a message with subject or body 'help' to
elecraft-requ...@mailman.qth.net

You can reach the person managing the list at
elecraft-ow...@mailman.qth.net

When replying, please edit your Subject line so it is more specific
than Re: Contents of Elecraft digest...


Today's Topics:

1. freq counter probe ? (Bryan)
2. KX3 Accuracy of clock (Esquer Dave)
3. Re: KX3 Accuracy of clock (Todd Atkins)
4. Re: ... and solar power (Igor Sokolov)
5. Trouble Scanning (K3) (paul ecker)
6. Admin help needed (john clark)
7. The Fun Begins (Robert Nobis)
8. Re: The Fun Begins (Mike Reublin)
9. Re: K3/RemoteRig - external speaker (AG0N-3055)
   10. Re: ... and solar power (George Dubovsky)
   11. Re: ... and solar power (Jim Brown)
   12. OT- Pixel PRO-1B Receiving loop for sale (Art KZ5D)
   13. Re: ... and solar power (George Dubovsky)
   14. Re: ... and solar power (Don Wilhelm)
   15. Re: ... and solar power (Wes)
   16. K3/100  P3/SVGA for sale (Tim Cook)
   17. Re: KX3 Accuracy of clock (Fred Jensen)
   18. Re: ... and solar power (Mel Farrer)
   19. Re: KX3 Accuracy of clock (Walter Underwood)
   20. Re: [K3 Remote] Audio Dropout switching SUB on/off
   (Rick Tavan N6XI)
   21. Re: KX3 Accuracy of clock (Brendan Minish)
   22. K2 / KPA ALC  problem. (Chris Kimball)
   23. K3 Dot length (k6xt)
   24. Re: K2 / KPA ALC  problem. (Don Wilhelm)
   25. Re: KX3 Accuracy of clock (Phil Kane)
   26. Re: KX3 Accuracy of clock (Don Wilhelm)
   27. Re: KX3 Accuracy of clock (Walter Underwood)
   28. Re: KX3 Accuracy of clock (Matt Zilmer)
   29. Re: Clock Notes (some OT) (Mike Morrow)
   30. Re: ... and solar power (Bob)


--

Message: 1
Date: Mon, 02 Dec 2013 10:48:46 -0700
From: Bryan hbsav...@shaw.ca
To: elecraft@mailman.qth.net
Subject: [Elecraft] freq counter probe ?
Message-ID: 529cc7fe.2090...@shaw.ca
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Thanks for the clarification guys,
The probe is about to be removed from my K2/10 to be stored elsewhere
until needed!

73, Bryan VE6HBS


--

Message: 2
Date: Mon, 2 Dec 2013 11:09:00 -0800
From: Esquer Dave dave.esq...@gmail.com
To: elecraft@mailman.qth.net
Subject: [Elecraft] KX3 Accuracy of clock
Message-ID: 9b49ec0a-e9cf-49a1-8cf0-6df6c7aa3...@gmail.com
Content-Type: text/plain; charset=windows-1252

Yep, mine drifts and I?ve had it up to a couple of minutes off. Surprisingly, 
for a week?s time, it can be about a minute or so off. I will pay more 
attention and keep track.

Dave, K6WDE

Begin forwarded message:


From: Gary Hawkins g...@hawkins-zhu.com
To: elecraft@mailman.qth.net
Subject: [Elecraft] [KX3} Accuracy of clock
Message-ID: 529bbfd0.1090...@hawkins-zhu.com
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hi all,

Does anyone know how accurate is the clock on KX3?  The reason I ask is
because I activated a local SOTA peak last weekend and did another peak
this weekend.  After setting the clock accurately last weekend, I did
not think about checking it this weekend but half way through this
weekend's activation I noticed my UTC time setting was 1hr and 17 mins
off!  While it was easy enough to correct the log, is the clock expected
to drift this much in a week?



--

Message: 3
Date: Mon, 2 Dec 2013 14:14:49 -0600
From: Todd Atkins toddandrewatk...@gmail.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3 Accuracy of clock
Message-ID:
caejfq7fk+sacdcsmakhsz5u46vfzpvqhm5ebsq3qqw7hjd_...@mail.gmail.com
Content-Type: text/plain; charset=windows-1252

I wonder how easy/hard it would be to have the radio poll 10Mhz (like the
atomic clocks do) every so often when powered on, to keep the time more
accurately.  That would be a pretty cool feature.

Todd, K4MSW

On Mon, Dec 2, 2013 at 1:09 PM, Esquer Dave dave.esq...@gmail.com wrote:


Yep, mine drifts and I?ve had it up to a couple of minutes off.
Surprisingly, for a week?s time, it can be about a minute or so off. I will
pay more attention and keep track.

Dave, K6WDE

Begin forwarded message:


From: Gary Hawkins g...@hawkins-zhu.com
To: elecraft@mailman.qth.net
Subject: [Elecraft] [KX3} Accuracy of clock
Message-ID: 529bbfd0.1090...@hawkins-zhu.com
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hi all,

Does anyone know how accurate is the 

[Elecraft] {Elecraft] KX3 Firmware upgrade

[barry middleton]

Thank you George,Dick and Ariel, I will do what you told me sometime 
today (Monday). Yes I have installed the latest KX3 utility so all 
should be well. I would like to thank Eric  Wayne and all the staff at 
Elecraft for producing first class kits etc and all those Amateurs who 
willingly give up  their time to help others with their problems.


 Thank you all
Barry G4DBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] KX3 Firmware upgrade

[barry middleton]

May I thank all who replied to my post, I have successfully down loaded 
the latest version of the firmware and installed it without any 
problems, I'll now know what to do the next time.


73 de Barry G4DBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] KX3 Firmware upgrade

[barry middleton]

Good Day
   I am hoping someone can help me, I am having trouble 
down loading the latest version of firmware for my KX3. I have printed 
out the instructions and have followed them to the letter, however I can 
not find the .zip file. This is the first time I have had a problem, 
previous down loads have been successful, and I am getting the same 
results on my main computer and my laptop.

   Thank you
Barry G4DBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] Elecraft Digest, Vol 112, Issue 23

[barry middleton]

Hello Paul,
I do not know if this any help to you, I live 4 miles 
S.E. of the City of Lincoln and about 5 miles from the 2 Kilowatt medium 
wave transmitters of BBC Radio Lincolnshire. The Station uses 2 phased 
vertical antennas, I have not noticed any BC break through on my KX3 fed 
by a 80ft doublet antenna, I hope that you and others find a cure to the 
problem.

53 de Barry G4DBS

On 15/08/2013 17:00, elecraft-requ...@mailman.qth.net wrote:

  Fra: Paul Barlowpaul.bar...@upcmail.ie
Til:elecraft@mailman.qth.net  
Sendt: Torsdag, 15. august 2013 12.52

Emne: [Elecraft] KX3 BC Breakthrough
   


After being QRT for a number of years I'm returning to the air with a new
call and location. I am seriously considering buying a KX3 (I have a K2 and
a K1), but I'm a little concerned by reports of AM breakthrough (or whatever
the right word is). I know this is because of the direct conversion
architecture of the rig. I also understand that the IK can be shifted to
8KHz, which should solve the problem, but in doing so makes the narrower
roofing filters and dual watch inoperable.

How many owners are having problems with AM BC breakthrough. I guess it's
mainly an EU problem. I'm located in Dublin, EI.

73,

Paul EI5KI (and M0CDP)


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] Portable speakers for KX3

[Barry Middleton]

Thank you Rick for pointing me in the right direction for portable 
speakers for the KX3. For the benefitof UK owners of KX3's these 
speakers can be obtained from Maplins at a cost of £7.99order code 
A27LC. I purchased mine yesterday (Sunday 02/17/2013) and it certainly 
improves the audio quality.



 A very satisfied Elecraft user
Barry G4DBS

K2/10, K2/100, KX3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] KX3 s/n 29*77

[Barry Middleton]

I completed the assembly of my KX3 yesterday Sunday 9th, with no 
problems at all, followed the manual word for word. Coming up for 76 
next month my fingers are not as nimble as they used to be and I found 
medical forcepseasier to use than long nosed pliers except for the large 
nuts. I am now slowly going through the operating manual getting it set 
up to my liking, I will be taking it to my local radio club soon in the 
hope that other members will like it and want to buy one. Thank you 
Elecraft for a first class radio.


73 de Barry G4DBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] KX3 K2/10 upgrades Speedy delivery

[Barry Middleton]

My I thank all at Elecraft for making this Ham's Christmas even happier, 
I ordered a KX3-K, KXAT3, KXBC3, KXFL3, MH3 and for the K2/10 FDimp, 
K160RX, KAF2 and KNB2on Monday 3rd December. I could hardly believe it 
when a driver from UPS delivered a box from Elecraft today Friday 7th 
Decemberat 12.30 UTC. I really was not expecting it until after 
Christmas, well done everybody. Yes it looks as if I have drunk the 
Elecraft Koolaid, I am hooked. May I wish everybody on this list a very 
happy Christmas.


73 de Barry G4DBS
2 K2's and now a KX3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K2 no audio from speaker

[Barry Middleton]

I also had the same problem with no audio from the speaker, either the 
built in or external. I finally traced it to the speaker plug on the RF 
board, after carefully removing the contacts from the shell and bending 
them slightly and re-fitting all is now well. Hope this is of help.

 73 de Barry G4DBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] Elecraft at UK National Hamfest

[Barry Middleton]

Having spent an enjoyable 4 days assisting my Ham Radio Club, the Royal 
Air Force Waddington Amateur Radio Club at the UK National Hamfest, I 
feel it would be nice if Elecraft could be present at next years event. 
Talking to other Hams I believe there would be a large interest in an 
Elecraft display. At this years event the ARRL and Bob Heil were much in 
demand, I understand the logistics involved, cost etc would not make 
this possible. Still an old man can dream can't he Hi.

 73  to all Elecrafters
 Barry Middleton G4DBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K2/100 #6459 alive and well

[Barry Middleton]

I would like to thank Gary and Richard for all the help that they gave 
me in trying to sort out a distorted audio problem on transmit that I 
had with my K2/100. I did not seem to be able to resolve the problem, so 
looking at the list on Elecraft's Website of Hams in the UK that might 
be able to help me I contacted Dave G3TJP. He said he was willing to 
have a look at it for me so I took it to him, to cut a long story short 
Dave found several problems and was able to sort them out for me. There 
is one outstanding fault but it is not affecting it's operation, that is 
I have lost the voltage/current measurement caused by a damaged MCU on 
the control board also CP U3. I will replace these items at a later date 
to bring it up to full spec. So thank you Gary, Richard and Dave and any 
others I have forgotten for all the help. I know of no other Amateur 
Radio manufacturer who offers such a first class support and help 
service to their customers.

 Regards

 Barry Middleton G4DBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K2/100 Distortion on 80M

[Barry Middleton]

I would like some help please, I have a K2/100 Ser# 6459 which is 
transmitting distorted audio on 80 metres only at all power levels, also 
the volume level of the transmitted audio as monitored on another 
receiver varies in a random manner. These tests were carried out using a 
dummy load with only the PSU and dummy load connected. Would I be right 
in thinking I may have a bad soldered lead on the 80m band pass filters 
that could cause this problem or should I look somewhere else. I build 
this K2/100 myself.

Thank you for any help you can give me,

  73 de Barry G4DBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] Slightly OT K2 sales targeted

[Barry Middleton]

Here in the UK we have a breakfast cereal called Special K, after 
watching a television programme I found out that it was also the name of 
a controlled substance i.e. a prohibited drug. I feel sorry for the 
people at Elecraft, all K2's shipped confiscated. Maybe they will have 
to call it  the K1.1 Hi.

73 to all Elecrafters

Barry G4DBS

K2/100 6***
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] Re K2 New builder

[Barry Middleton]

Hello George,
   If it is of any help to you when I built my 
two K2's I used a foam rubber pad to mount all the passive components 
i.e. the capacitors, chokes and the loose resistors. I also used 
conductive foam for the transistors etc. I did this for each board and 
in the value order they were to be mounted on the PCB. I found that this 
also helped to prevent components going missing as some of the caps are 
very small.

 Enjoy the building of your K2 and using one of the finest rigs on 
the market for the price, more joy for less dollars Hi.

 Barry G4DBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] Aliens showing Displeasure

[Barry Middleton]

elecraft-requ...@mailman.qth.net wrote:
 Send Elecraft mailing list submissions to
   elecraft@mailman.qth.net

 To subscribe or unsubscribe via the World Wide Web, visit
   http://mailman.qth.net/mailman/listinfo/elecraft
 or, via email, send a message with subject or body 'help' to
   elecraft-requ...@mailman.qth.net

 You can reach the person managing the list at
   elecraft-ow...@mailman.qth.net

 When replying, please edit your Subject line so it is more specific
 than Re: Contents of Elecraft digest...


 Today's Topics:

1. K3 in the CQWW contest (DOUGLAS ZWIEBEL)
2. Heil ProSet 4 for sale (k9foh)
3. [K3] Minor XIT/RIT display glitch with band change by   RS232
   (Carl Clawson)
4. ANNOUNCEMENT:  QRP-ARCI TOP BAND SPRINT (Jeff Hetherington)
5. K2  Denoiser (n0jrn)
6. Re: K3 in the CQWW contest (Jim Brown)
7. Re: K2  Denoiser (Lyle Johnson)
8. Re: K3 in the CQWW contest (Bob Tellefsen)
9. [K3]  Nabble - can't get there from the Elecraft page? (NZ0T)
   10. Re: [K3] Minor XIT/RIT display glitch with band change
   byRS232 (Joe Subich, W4TV)
   11. Re: K3 in the CQWW contest (Joe Subich, W4TV)
   12. Audio blast from the past (Merv Schweigert)
   13. K2 Side tone not working (Dave Barr)
   14. Re: [K3] Nabble - can't get there from the Elecraft page?
   (Julian, G4ILO)
   15. Re: K3 in the CQWW contest (David Gilbert)
   16.  USB Sound Card for digital modes. (Kenneth A. Christiansen)
   17. Re: [K3] Nabble - can't get there from the Elecraft page?
   (Eric Swartz - WA6HHQ, Elecraft)
   18. Re: K2 Side tone not working (Don Wilhelm)
   19. Re: K3 in the CQWW contest (Brendan Minish)
   20. [K2]  Question on K2 audio output (Tom McCulloch)
   21. Re: [K2]  Question on K2 audio output (Don Wilhelm)
   22. Re: USB Sound Card for digital modes. (Joe Subich, W4TV)
   23. Re: [K3] Nabble - can't get there from the Elecraft page? (NZ0T)
   24. K3 static electricity (Steve Ellington)
   25. Aliens showing Displeasure? (JIM DAVIS)
   26. Re: K3 in the CQWW contest (Dyarnes)
   27. Re: K3 static electricity (Guy Olinger K2AV)
   28. Re: USB Sound Card for digital modes. (Rich)
   29. Re: Aliens showing Displeasure? (Leigh L. Klotz, Jr WA5ZNU)
   30. Re: Aliens showing Displeasure? (Ken Kopp)
   31. Re: K3 in the CQWW contest (GW0ETF)
   32. Re: K3 in the CQWW contest (Bill W4ZV)
   33. Re: K3 in the CQWW contest (Hector Padron)
   34. K3: killing RX key clicks (Brian Machesney)
   35. Re: K3 static electricity (Brian Machesney)
   36. Re: K3 in the CQWW contest (Hector Padron)
   37. Re: K3 static electricity (Bill W4ZV)
   38. Re: K3 static electricity (Paul Christensen)
   39. Re: K3 in the CQWW contest (Matt Zilmer)
   40. Re: K3 in the CQWW contest (Guy Olinger K2AV)
   41. Re: Aliens showing Displeasure? (Byron Servies)
   42. Re: K3 static electricity (Paul Christensen)
   43. Re: K3 static electricity (KM5Q)
   44. Re: K3 static electricity (Alan Sewell N5NA)
   45. Re: K3 static electricity (Ron D'Eau Claire)
   46. Re: K3 static electricity (Steve Ellington)
   47. Re: K3: killing RX key clicks (Guy Olinger K2AV)


 --

 Message: 1
 Date: Mon, 30 Nov 2009 12:37:46 -0500
 From: DOUGLAS ZWIEBEL doug...@gmail.com
 Subject: [Elecraft] K3 in the CQWW contest
 To: Elecraft Reflector elecraft@mailman.qth.net
 Message-ID:
   456b616e0911300937s3d4357dexc669e51d2c0c0...@mail.gmail.com
 Content-Type: text/plain; charset=ISO-8859-1

 from a perennial winner (or 2nd placer)...

 http://lists.contesting.com/pipermail/3830/2009-November/186148.html

 Says it all (only need to ready first two paragraphs, although he
 again lauds the K3 further down).

 What a great radio

 Thanks Aptos (or wherever you are now).

 de Doug KR2Q


 --

 Message: 2
 Date: Mon, 30 Nov 2009 12:41:58 -0500
 From: k9foh k9...@comcast.net
 Subject: [Elecraft] Heil ProSet 4 for sale
 To: elecraft@mailman.qth.net
 Message-ID: e77f4ba8c3f541c28aa6848c8161e...@bob
 Content-Type: text/plain; charset=iso-8859-1

 Heil ProSet 4 (DX element boom mike with dual headset) in excellent condition 
 with box and instruction sheet for sale, $100 shipped in the lower 48.  Used 
 with my K-3, rear panel connections.  Upgraded to Heil ProSet Plus.  Contact 
 off line please.  Cheers, Bob, k9...@comcast.net

  

 --

 Message: 3
 Date: Mon, 30 Nov 2009 10:13:57 -0800
 From: Carl Clawson carlclaw...@verizon.net
 Subject: [Elecraft] [K3] Minor XIT/RIT display glitch with band change
   by  RS232
 To: Elecraft@mailman.qth.net
 Message-ID: 633840543eba44a8b3be76667e5ea...@thumbelina
 Content-Type: text/plain; charset=us-ascii

 This happens using N1MM logger V9.10.3 and K3 V3.6.3. I don't have any
 serial snooper tools handy so I can't give the exact RS232 command sequence,
 but it appears as if N1MM tries to turn off RIT/XIT on band change. To
 reproduce:

[Elecraft] Elecraft Moving

[Barry Middleton]

Hello Eric and Wayne and all at Elecraft,
   My I pass 
my best wishes to you all on your move and I hope it all goes to plan, 
Just a thought, could you move to the UK. Joking apart my thanks to you 
for your first class products and your outstanding after sales service.

73 de Barry G4DBS
K2/100
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] Elecraft Digest,Web site slow to load

[Barry Middleton]

Hello Srewart,
I am on ntlworld.com and I have just checked my 
down load speed 11.07Hrs 04/02/2009 and it is very fast, no delay at 
all. Maybe you have a problem somewhere in the system.

 73 de Barry G4DBS K2/100 owner.

elecraft-requ...@mailman.qth.net wrote:
 Send Elecraft mailing list submissions to
   elecraft@mailman.qth.net

 To subscribe or unsubscribe via the World Wide Web, visit
   http://mailman.qth.net/mailman/listinfo/elecraft
 or, via email, send a message with subject or body 'help' to
   elecraft-requ...@mailman.qth.net

 You can reach the person managing the list at
   elecraft-ow...@mailman.qth.net

 When replying, please edit your Subject line so it is more specific
 than Re: Contents of Elecraft digest...


 Today's Topics:

1. Re: RTTY problem (Ed Steeble)
2. Re: ATU Manual Adjust not working ? (wayne burdick)
3. K3 Mods or Updates (W0MU Mike Fatchett)
4. Re: K3 Mods or Updates (Lyle Johnson)
5.  ATU Manual Adjust not working ? (Mike Scott)
6. Elecraft Web Site - speed (Stewart Baker)
7. Re: K3 AM reception (Graham Kimbell (G3TCT))
8. Re: Elecraft Web Site - speed (Don Wilhelm)
9. Re: Elecraft Web Site - speed (Julian, G4ILO)
   10. Elecraft Items For Sale (hims...@basicisp.net)
   11. W1 housing? (Ken Kopp)
   12. Re: Elecraft Web Site - speed (Grant Youngman)
   13. Re: Elecraft Web Site - speed (Darwin, Keith)
   14. Re: W1 housing? (Dave Van Wallaghen)
   15. Re: K3 AM reception (Grant Youngman)
   16. K3 interface to THP 1.5Kfx amp (Jim Spears)
   17. (no subject) (Phil LaMarche)
   18. PEP and forward power about double of set power (Greg Buhyoff)
   19. Downloading K3 Config (Roy Morris)
   20.  K3 KDVR3 - Monitoring AF Play (Geoffrey Downs)
   21. Re: PEP and forward power about double of set power
   (Julian, G4ILO)
   22. K2 diffuser installation (Bill Miner)
   23. Re: Downloading K3 Config (Julian, G4ILO)
   24. K2 control board U6 pin 29,30 (Mike Weir)
   25. Re: Downloading K3 Config (Dick Dievendorff)
   26. [K3]  KPA3 12v Sense Mod Question (Corboy-Poteet)
   27. Re: K3 interface to THP 1.5Kfx amp (Phil  Debbie Salas)
   28. Re: [K3]  KPA3 12v Sense Mod Question (Ron D'Eau Claire)
   29. KAT2 question abt voltage at U4, pin7 (kc9...@aol.com)
   30. Re: KAT2 question abt voltage at U4, pin7 (Don Wilhelm)
   31.  K3 momentary loss of audio (W7TEA)
   32. K3 RF knob Broken (Ron Hinton)
   33. Re: K3 RF knob Broken (Jay Rodaman)
   34. Re: K3 RF knob Broken (Doug Faunt N6TQS +1-510-655-8604)
   35. Re: K3 RF knob Broken (wayne burdick)
   36. Re: K3 RF knob Broken (Tom Hammond)
   37. KX1 appears dead after KXB3080 PCB installed... ...Help
   please! (Shawn Morrow)
   38. Re: K3 AM reception (Gill W4RYW)
   39. Set power and actual measured power all square now (Greg Buhyoff)
   40. Re: Downloading K3 Config (Roy Morris)
   41. K2 power out (John)
   42. Re: KX1 appears dead after KXB3080 PCB installed... ...Help
   please! (Don Wilhelm)


 --

 Message: 1
 Date: Tue, 03 Feb 2009 12:12:45 -0500
 From: Ed Steeble estee...@sc.rr.com
 Subject: Re: [Elecraft] RTTY problem
 To: K3_Discussion_Group elecraft@mailman.qth.net
 Message-ID: 49887b0d.6070...@sc.rr.com
 Content-Type: text/plain; charset=ISO-8859-1; format=flowed

 I use Quick Mix http://www.ptpart.co.uk/quickmix/ to save and restore 
 my sound card setting. This program has saved me more than once.
 73, Ed
 K3IXD
 K3 1726


 Date: Tue, 03 Feb 2009 15:14:41 +
 From: Brian Alsop als...@nc.rr.com
 Subject: Re: [Elecraft] RTTY problem
 To: Elecraft@mailman.qth.net
 Message-ID: 49885f61.3090...@nc.rr.com
 Content-Type: text/plain; charset=ISO-8859-1; format=flowed

 Had the same thing happen after installing the new Google Earth today. I 
 couldn't figure out what was changed in the audio pannel. Restoring 
 computer to a state just before the Google Earth install solved the 
 problem. 73 de Brian/K3KO N1IX wrote:

   I am having a problem with receiving RTTY signals. It worked before 
 so I assume it is something I have set incorrectly.
   There is no  display of anything on any of the RTTY applications. No 
 waterfall, nothing at all. I have tried different computers and multiple 
 applications with the same results. I have adjusted the line out item in 
 the config menu to full scale.
   I plugged headphones into the line out jack I can hear the RTTY 
 signal but it seems to be attenuated. Although I don't know how loud it 
 should be.
   BTW: transmit doesn't work at all. That will be the subject of 
 another email.
   Any help would be appreciated.
   
   Dave N1IX
   


 --

 Message: 2
 Date: Tue, 3 Feb 2009 09:14:18 -0800
 From: wayne burdick n...@elecraft.com
 Subject: Re: [Elecraft] ATU Manual Adjust not working ?
 To: CLAS OLOF BERGMAN classe.berg...@telia.com
 Cc: Elecraft@mailman.qth.net
 Message-ID: 

Re: [Elecraft] Elecraft Digest, Vol 58, Issue 1 K2 replacement battery

[Barry Middleton]

Hello Steven,
  Have you looked on Strikalite's web site as they 
do a range of batteries for all types of equipment including sealed lead 
acid.

73 de Barry G4DBS

elecraft-requ...@mailman.qth.net wrote:
 Send Elecraft mailing list submissions to
   elecraft@mailman.qth.net

 To subscribe or unsubscribe via the World Wide Web, visit
   http://mailman.qth.net/mailman/listinfo/elecraft
 or, via email, send a message with subject or body 'help' to
   elecraft-requ...@mailman.qth.net

 You can reach the person managing the list at
   elecraft-ow...@mailman.qth.net

 When replying, please edit your Subject line so it is more specific
 than Re: Contents of Elecraft digest...


 Today's Topics:

1. Re: K3 Sub Rx idea (Milt, N5IA)
2. Re: SHIFT pitch (wayne burdick)
3.  K2 - Extra part - diode? (djmd)
4. Re: K3 - diversity reception question (wayne burdick)
5. Re: K2 - Extra part - diode? (djmd)
6.  Elecraft SSB Net Announcement (Phil and Christina)
7. K3 BUFFER MOD? (Bill Maddock)
8. How2 K2 as RX with TS-450 as TX ? (Sam Morgan)
9. Re: K3 Sub Rx idea (Bill W4ZV)
   10. [K2} K2 battery source in UK (Stephen Prior)
   11. Re: How2 K2 as RX with TS-450 as TX ? (Dave G4AON)
   12. Re: [K2] K2 battery source in UK (Dave G4AON)
   13. Re: K3 Sub Rx idea (David Ferrington, M0XDF)
   14. K3 (Gerd OE3GSA)
   15. Re: K3 BUFFER MOD? (Doug Joyce)
   16. Re: [K2] K2 battery source in UK (Stephen Prior)
   17. Re: K3 BUFFER MOD? (Richard Ferch)
   18. Re: [K2] K2 battery source in UK (Dave G4AON)
   19. Re: [K2] K2 battery source in UK (Guy Olinger, K2AV)
   20. K3 - Diversity Reception, Matched Roofing Filters
   (Walter V. Gilles)
   21. Re: K3 Sub Rx idea (Bill W4ZV)
   22. Re: K3 LINE Out mixes KRX3 and main output? (Joe Subich, W4TV)
   23. Re: [K2] K2 battery source in UK (Stephen Prior)
   24. Re: K3 - Diversity Reception, Matched Roofing Filters (Bill W4ZV)
   25. Re: K3 BUFFER MOD? (Bill W4ZV)
   26. Fw:  [K1]  SN 2682 is borne (Steve M0ECS (subs))
   27. Re: K3 - Diversity Reception, Matched Roofing Filters
   (W0MU Mike Fatchett)
   28. Re: K3 - Diversity Reception, Matched Roofing Filters
   (Don Wilhelm)
   29. K3 and Codan antenna (Ron - PE8E)
   30. Re: Impossible mission? USB with the 13khz filter for   PSK31on
   Digipan (Joe Subich, W4TV)
   31. Re: Impossible mission? USB with the 13khz filter for   PSK31on
   Digipan (Joe Subich, W4TV)
   32. Re: K3 LINE Out mixes KRX3 and main output?
   (Leigh L. Klotz, Jr WA5ZNU)
   33. [K2} Headphone jack dead? (kg3vt...@gmail.com)
   34. Re: K3 - Diversity Reception, Matched Roofing Filters (Gary Smith)
   35. Re: [K2} Headphone jack dead? (Don Wilhelm)
   36. Elecraft CW Net Announcement (Kevin Rock)
   37. K2 unadvertised feature ? (Steve Kavanagh)
   38. Re: K2 unadvertised feature ? (Don Wilhelm)
   39. KPA3  Heatsink  PA MOSFET (Jeff Wandling W7BRS)
   40. Re: K3 LINE Out mixes KRX3 and main output? (Joe Subich, W4TV)
   41. Re: K3 LINE Out mixes KRX3 and main output? (Kok Chen)
   42. Re: KPA3  Heatsink  PA MOSFET (David Pratt)
   43. Unable to config K3 (Eric)
   44. Re: Unable to config K3 (Eric)
   45. Re: [K2]  K2 battery source in UK (Julian, G4ILO)
   46. Re: K3 - Diversity Reception, Matched Roofing Filters (Barry N1EU)
   47. Re: [K2]  K2 battery source in UK (AD6XY)
   48. Re: [K2] K2 battery source in UK (Julian G4ILO)
   49. Sub RX audio in diversity changes when BSET is active (K2MK)
   50. Re: Sub RX audio in diversity changes when BSET is active
   (Bill W4ZV)


 --

 Message: 1
 Date: Sat, 31 Jan 2009 10:23:47 -0700
 From: Milt, N5IA n...@zia-connection.com
 Subject: Re: [Elecraft] K3 Sub Rx idea
 To: wayne burdick n...@elecraft.com
 Cc: Elecraft Reflector elecraft@mailman.qth.net, m...@paxsen.com
 Message-ID: d530ef37c9bb433d811f419def5ed...@milt
 Content-Type: text/plain; format=flowed; charset=iso-8859-1;
   reply-type=original

 GM Wayne,

 I understand A/B and the swap per AB2TC's comment.  But there are some of 
 the settings which do not follow.  I know you know and will address them if 
 at all possible.  It was just my dos centavos thrown into the pile.

 73, and thanks de Milt, N5IA

 - Original Message - 
 From: wayne burdick n...@elecraft.com
 To: Milt, N5IA n...@zia-connection.com
 Cc: m...@paxsen.com; Elecraft Reflector elecraft@mailman.qth.net
 Sent: Saturday, January 31, 2009 9:55 AM
 Subject: Re: [Elecraft] K3 Sub Rx idea


   
 I'm gradually weeding out commands that don't work in BSET mode. Until
 then, you might want to do A/B, change the setup, then A/B again.

 73,
 Wayne
 N6KR


 On Jan 31, 2009, at 6:40 AM, Milt, N5IA wrote:

 
 Wayne,

 The most undesireable aspect of BSET is the fact that the
 communication with the computer is interrupted.  The logging program
 dispays a pop-up window indicating lost communication if BSET 

[Elecraft] K2 Digital Interface v.ll.2 Thanks

[Barry Middleton]

May I thank all those who replied to my enquiry for the interface, I 
have had a very kind offer from Doug N6TQS to supply me with a PCB. I 
always think of Elecraft and the owners of their products as a big happy 
family, long may this continue.

73 de Barry G4DBS
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] K2 Digital Interface v.ll.2

[Barry Middleton]

Is it possible to obtain a kit for this interface, I would prefer to 
purchase from the EU but also the USA if not available in the EU.

Best wishes Barry G4DBS
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] Re: Elecraft Digest, Vol 56, Issue 39

[Barry Middleton]

Thank you Joe for the best wishes, I send all my best wishes to all at 
Elecraft and all owners of K1, K2  K3s. Season Greetings and may 2009 
bring you all that you desire.


  73 de Barry G4DBS

elecraft-requ...@mailman.qth.net wrote:

Send Elecraft mailing list submissions to
elecraft@mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/elecraft
or, via email, send a message with subject or body 'help' to
elecraft-requ...@mailman.qth.net

You can reach the person managing the list at
elecraft-ow...@mailman.qth.net

When replying, please edit your Subject line so it is more specific
than Re: Contents of Elecraft digest...


Today's Topics:

   1. Re: K3 and noise (David Woolley)
   2. K3 on VLF (David Pratt)
   3. Re: K3 Firmware Rev. 2.76:  No AF noise burst;PRE/ATTN
  independent for sub RX; etc. (Stewart Baker)
   4. Re: 6 meters (Brendan Minish)
   5. Re: Proper Heil Microphone Adapter? (Dick Roth, KA1OZ)
   6. Re: Proper Heil Microphone Adapter? (Don Wilhelm)
   7. RE: saving RX EQ per mode (Ignacy)
   8. Re: 50 and 100 DSP positions (Ignacy)
   9. K3 QRP output power level (Richard Haendel)
  10. Request (Ignacy)
  11. RE: 6 Meters (Dave Agsten)
  12. RE: Walwart power? (list1)
  13. RE: K3 QRP output power level (Dick Dievendorff)
  14. OT - Holiday wishes (Joe Stofko)
  15. K3 Subreceiver ANT selection doesn't work - alwaysuses the
  AUX antenna (Frank R. Oppedijk)
  16. Re: Christmas 2008 (Robert C.Abell)
  17. Re: K3 QRP output power level (Don Wilhelm)
  18. Thank you! (Phil LaMarche)
  19. happy holidays (DOUGLAS ZWIEBEL)
  20. Re: K3 Subreceiver ANT selection doesn't work - alwaysuses
  the AUX antenna (Barry N1EU)
  21. Re: K3 Subreceiver ANT selection doesn't work - alwaysuses
  the AUX antenna (Barry N1EU)
  22. Re: happy holidays (Jan Erik Holm)
  23. Re: Walwart power? (rkayakr)
  24. Re: happy holidays (Dave Yarnes)
  25. RE: K3 Subreceiver ANT selection doesn't work -   always  uses
  the AUX antenna (Bruce McLaughlin)
  26. RE: K3 Subreceiver ANT selection doesn't work -   always  uses
  the AUX antenna (Bruce McLaughlin)
  27. A K3 Variation of SKN (Dave Yarnes)
  28. Re: A K3 Variation of SKN (David Pratt)
  29. A K3 Variation of SKN (Tom Hammond)
  30. Re: happy holidays (Vic Rosenthal [TSI])
  31. Re: K3 Subreceiver ANT selection doesn't work -   always uses
  the AUX antenna (Frank R. Oppedijk)
  32. RE: Proper Heil Microphone Adapter? (Jeff Maass)
  33. Re: Thank you! (Jim Brown)
  34. Re: K3 Subreceiver ANT selection doesn't work - alwaysuses
  the AUX antenna (Barry N1EU)
  35. RE: saving RX EQ per mode (NZ0T)
  36. Re: saving RX EQ per mode (Iain MacDonnell - N6ML)
  37. A K3 Variation of SKN (Jim W7RY)
  38. happy holidays to Wayne and Eric and tnx for the K3 (O. Johns)
  39. Jack on bottom of K3? (David F. Reed)
  40. RE: Jack on bottom of K3? (Ron D'Eau Claire)
  41. Re: A K3 Variation of SKN (WILLIS COOKE)
  42. Re: K3 SSB Contour Filter (reduce total bandwidth)
  (Joe Subich, W4TV)
  43. Looking for an Elecraft BL2 balun (NZ8J)
  44. RE: saving RX EQ per mode (NZ0T)
  45. Re: K3 Subreceiver ANT selection doesn't work - alwaysuses
  the AUX antenna (WILLIS COOKE)
  46. K3 Utility version 1.1.12.22 now available on Elecraftweb
  site (Dick Dievendorff)
  47. Happy Holidays (Ken Kopp)
  48. K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1
  mW (wayne burdick)
  49. K3 Firmware Download Utility (Doug Joyce)
  50. RE: K3 Firmware Download Utility (Bill Johnson)


--

Message: 1
Date: Wed, 24 Dec 2008 09:31:01 +
From: David Woolley for...@david-woolley.me.uk
Subject: Re: [Elecraft] K3 and noise
To: Elecraft elecraft@mailman.qth.net
Message-ID: 49520155.3040...@david-woolley.me.uk
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Ron Kenwood wrote:
  

I have a continuous S7 to S8 noise level at normal SSB bandwidths. If
I had to describe the noise, I would say it sounds like amplified
background band noise. The source is outside my house. Removing the



If the noise is close to gaussian, there is nothing any receiver noise 
reduction system can do with it, to actually remove it, although it can 
do things like muting the receiver in gaps in the speech, if the speech 
is above the noise, or generating a graphic equaliser that de-emphasises 
frequency not also being used for the speech.


  
I have read glowing reports on the effectiveness of the noise blanker, 
here and elsewhere. I am wondering if the type of noise is part of the 



Noise blankers require that the noise be isolated spikes that can be cut 
out without removing too much of the signal.


  
equation, and I just have a type of noise where the noise blanker is 
less effective, or am I doing something wrong, or do I just 

[Elecraft] Re K2 I/O problem

[Barry Middleton]

Hi Rolf,
I have had this problem about a week ago, my K2/100 would 
not talk to HRD or K2 Remote. I checked all cables etc no problems 
there. However I found that I had lost the side tone on cw, I then 
discovered that the K2 had somehow reset the U8-4 source to the default 
U6-25 setting. After re-setting it to the correct U8-4 source every 
thing worked again with HRD and K2 remote.


   Hope this is of some help to you

  73 de Barry G4DBS
No virus found in this outgoing message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.9.10/1814 - Release Date: 11/26/2008 
20:53
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com