Disconnected PTT line from KPA500, still 15 db attenuation on RX.
-Original Message-
From: Dick Dievendorff die...@comcast.net
To: mcduffie mcduf...@garymcduffie.com; 'John K3TN' jpescat...@aol.com
Cc: 'elecraft' elecraft@mailman.qth.net
Sent: Sun, Feb 10, 2013 5:58 am
Subject: RE: [Elecraft] KPA500 - Rx Attenuation
Make sure that the amp's PTT line is not pulled low when you expect to be
receiving.
73 de Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of AG0N-3055
Sent: Saturday, February 09, 2013 8:24 PM
To: John K3TN
Cc: elecraft
Subject: Re: [Elecraft] KPA500 - Rx Attenuation
On Sat, 9 Feb 2013 19:51:09 -0800 (PST), John K3TN wrote:
I thought 40M signals sounded kinda low, and the noise floor on the P3
was down - but then noticed when I turned the KP!500 from OPER to
STBY, signals came about 15db. No fault indicated. TX power seems fine.
Any thoughts?
I'm currently investigating a similar problem. To speak to your issue, I
have not seen it at all. However, there is something similar happening on
the frequencies below 160M.
Gary
--
Web: http://ag0n.net
NodeOp Page: http://ag0n.net/irlp
Node 3055: http://ag0n.net/irlp/3055
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html