[Elecraft] 2nd Receiver K3 Pictures?
Hi Folks - I was wondering if there were any more detailed pictures of the 2nd receiver board with the RF plate removed? Thanks! Paul w9bbr ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] [K3] Pan Adapter
I would love to hear from anyone using the LP-PAN. Any real-life display pictures or videos would be neat. 73 Paul ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] [K3] Pan Adapter
Thanks to Bruce and others for their experiences using the LP-PAN and PowerSDR. Also, the U-Tube videos were great! 73 Paul W9BBR "Bruce Bowman, NM5B" <[EMAIL PROTECTED]> wrote: Go here: http://groups.yahoo.com/group/LP-PAN/ There are hundreds of archived notes to read. Bruce, NM5B > I would love to hear from anyone using the LP-PAN. Any real-life > display pictures or videos would be neat. > > 73 > Paul ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Big trade for a Loaded K3
Call me crazy, but for you folks who may have purchased one too many K3's(is that possible?) I would offer up a like-new (less than 60 hours) Icom 756-Pro-III along with a museum quality Collins S-Line Station used aboard the U.S.S. Saratoga which includes a Collins 32S-1 Excellent + Collins 75S-1 Excellent + Collins 30L-1 Excellent + Collins 312B-4 Excellent + Collins S-Line Matching speaker! If that combination doesn't work I can mix & match a gorgeous 75A-4 receiver & a Red 1994 Olds'98 with 72,000 miles (for the Chicago area folks) - it's very pretty! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Assembly Pictures?
Anybody have some good pics of their K3 assembly process? love to see them! 73 Paul ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Pictures of KRX3 posted yet?
Just curious if pictures of the new version of the KRX3 have been posted anywhere? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Is it OK to USE Heil/Elecraft MD-2 Mic w/ K3?
Anyone having a problem using the Heil MD-2 Desk Mic w/ the K3? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Where have all the K2s Gone?
My K2 is now in the hands of my father in PA waiting for him and my 9 year old nephew to get licensed. Hope they pass their test soon - lots of openings on 40m lately to that part of the country! Come on guys... you can do it 73 Paul w9bbr p.s. - Elecraft . without getting all technical and stuff... I am amazed by my K3! Bravo! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Transmit problem
I must have inadvertently changed a setting because I'm having trouble transmitting. My last contacts were FB during a contest a few weeks back. Same up-to-date firmware, no changes. Now when I start talking with the VOX settings on my MD-2 mic ( set for "fpl bias" when I checked the settings in the MIC SEL Main menu) I get a full carrier out with no modulation and I can no longer hear my voice being transmitted, only a loud hissing noise keeps transmitting even though I've stopped talking on VOX. Any suggestions? I reloaded the firmware twice with no change. I'm sure I'll feel silly when I figure this out :-) 73 Paul w9bbr ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 to Original Facotry Settings?
Can the K3 be re-set back to the original Main Menu/Config settings that the K3 arrived with? I have the latest firmware installed. Tx! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft Holiday Orders - Get 'em in soon!
I hear you Eric! In that case, I would like to put in an early Holiday order for the 800 watt & 1500 watt Linear Amplifiers. Please let me know the total! Thanks! Paul Eric Swartz WA6HHQ - Elecraft Just a reminder that things get very busy as we approach December 25. If you are planning to order for receipt before that date please get it in as early as possible. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Solar Controllers
I built 2 of Don's controllers for Field Day a while back and they worked great! Simple to build and an excellent value in my opinion! 73 Paul w9bbr Don Brown <[EMAIL PROTECTED]> wrote: Hi I have been supplying a Solar Charge Controller Kit for several years. This controller will keep a SLA or LA 12 volt battery charged from solar panels of 3 to about 150 watts. Batteries of 2 amp hour to 110 amp hour have been used with these controllers. The new batch of circuit boards I received had a problem from the board supplier and had to be made over. This delayed shipment on a few orders but I have the corrected circuit boards now and all orders have shipped. (The silk screen was on the wrong side of the board.. go figure.) The kit is $30 or two for $50 check or money order and includes all the parts and documentation required to build the controller, less a box to mount it into. I also still have about 8-10 of the low power controller. This controller will handle up to 1.5 amps or about 20 watts. This version will power a KX1, K1 or QRP K2. The price for this version is $16 order from: Don Brown KD5NDB 19132 Falls Creek Drive Flint, Texas 75762 The price includes US postage Thanks Don ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Upcoming HAMFESTS: I'll offer to Demo...
I'll be available to exclusively demo the new Elecraft Amplifiers. Wayne & Eric, please send me a demo-unit so I may familiarize myself with it's workings, so as to better represent your products at these important Hamfests. ;-) 73 Paul W9BBR --- Lisa Jones <[EMAIL PROTECTED]> wrote: > 1. Orlando HAMCATION: February 11 and 12th. > > Elecraft (Eric & Lerma) will be at the Orlando > Hamcation with lots of > product to show and sell. > > BOOTH HELP WANTED . > > Anyone interested in helping out at the booth > please contact me > ([EMAIL PROTECTED]). Just let me know what day and > time you would be > available. > > > 2. THIS WEEKEND: JARC Capitol City HAMFEST in > Jackson MS. Feb, 3 and > 4th. The table will be run by Elecraft enthusiasts > W5EZY and friends. > Thanks guys! > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: Fw: [Elecraft] Coolest Thing at Dayton
It looks like someone re-sized(ie: squished!) a Normal K2 picture to fit onto an "existing" standard sized pin "blank". The dimensions are all out of whack. Too bad. The other pins look neat. 73' Paul w9bbr n3drk <[EMAIL PROTECTED]> wrote: They surely did not get it right if the pin rig looks like the pic. I would have liked to purchase a couple but not some caricature of the K2. Looks very tacky. john-n3drk Subject: Fw: [Elecraft] Coolest Thing at Dayton > The Pins are clearly there. The rig in the picture sure doesn't look like > a > K2 however. Looks more like an old Icom rig. > 73, > > Steve Brandt N7VS > Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] A 2006 K2-B w/ Color TFT?
I like Fred's idea. The K2 is a great radio with performance that need litle or no improvement. However, if Elecraft offered a larger footprint case along with a color TFT display and more funtions given over to their own knobs and buttons instead of the multiple menues, I'd be in line to pick one up in heartbeat. Of course I have no idea if something like that is even possible, but it's fun to think about it! 73 Paul w9bbr "Fred (FL)" <[EMAIL PROTECTED]> wrote: Don - I'm not trying to interface my PC or notebook, to my K2 #5422. Rather I was suggesting one simple, or not so simple, 2006 technology upgrade path for the K2. My premise is that Elecraft will probably not create a K3 any time soon. But the designers did make the xcvr very modular - with a front panel, control, and RF board. My quest would be able to buy and build a KSD2, a display upgrade option for my K2. I'm sure there would be many hams who are perfectly happy with their K2 just as it is. Others not. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Applied 12V to accessorie jack
Hi Folks, I lent my K2100 out to a ham in Reading, PA a few years ago and apparently he misplaced the power connector and applied 12V directly to the 12 V power-out jack (Anderson Power Pole connector). He said the radio powered up fine, but when he went to tune up and transmit, the unit went dead. I got the radio back about a year and a half ago and want to dive in and see what might have happened. Can anyone give me a place to start or have an idea if I'm looking at just replacing a fuse or something more involved? Thanks! Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] OT: Flat Panel Display Died
Way OT! I was hoping that some of you computer types could reply to me "Off List" with some possible fixes. I have a 4 year old Dell Flat Panel Display that seemed to die during what may have been a power surge. My Satellite System died as well, but worked again when I re-booted it. Both were plugged into surge protectors so go figure. :-) I took the back panel off to see if the power supply fuse was blown, but the fuse was good - just no powering up at all for the monitor. I'm using a substitute flat panel display which is working well, so it's definitely the unit. Any ideas? Any things that go bad routinely in these units? Thanks for helping and please respond Off List. 73 Paul W9BBR ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] New Amp: Mt Everest!
I don't see the point in debating the "Meaning of Elecraft" between the Qrp and Qro crowds. I think Elecraft is evolving and growing to meet the needs of ALL hams. Does a K2/100 not work as perfectly as a K2? Is the KX1 the coolest, smallest, most enjoyment ever put into a tiny box? You bet! I happen to love Qrp. I like a 100 watts as well. Do I need an 800 watt or 1500 watt amp with autotuner? OF COURSE I do! I need it because it would be fun to have it when conditions are abysmal. I need it because it will be yet another wonderful piece of Elecraft designed ham equipment that will yield countless hours of soldering enjoyment. I need it for the same reasons that men need to climb Mt. Everest - "because it's there!". Will I probably have to donate a kidney to afford it? Absolutely! Now here's the great part - Buy it and build it for the fun of it and then Sell it if you have to! I bet you could charge a $500 premium to sell the hottest Amp on the market that will work with every rig out there! I imagine folks will be lining up for these babies. Anyway, Kudos to Elecraft for stepping up to the plate with their ingenuity, flare, and their dedication to become the major force that they are in ham equipment for All hams! 73 Paul W9BBR ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Elecraft Amp pics?
Just curious about the look of the new Elecraft Amp - if it was on display at Dayton, were there any pictures available from Wayne and Eric or passers-by? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] New Amp Debut?
Anyone hear when the new linear amps will be available for purchase? Have they started beta testing? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] MP-1 Quality?
John, Luckily, I had no problem with my MP-1like you describe. I used it primarily SSB about 2 years ago mostly on vacation, at Dayton, or when on picnic table breaks along the interstate. I found it very well machined except for one of the threads on a tripod leg. I did find the MP-1 a little finicky to manually tune, but definitely more than adequate and had a good number of contacts. ie, I would recommend the antenna. However, recently I purchased a factory-built Buddipole system which I used during the tail end of Field Day and over the next two weeks. My experience with the buddipole was a better one. The antenna performed better from the living room of my frame bungalow and also on a tripod in my back yard. I did a side-by-side test in my house with both antennas optimized w/ my MFJ ant analyzer, and the buddipole was better on all accounts. Admittedly, this was a very limited and extremely unscientific test, but nonetheless convinced me to use the buddipole when size was not a limiting factor. While the buddipole does break down to nice carrying case, the MP-1 has it beat hands down in transportability. If I'm traveling on business(seldom these days) and it all has to fit in my briefcase, the the MP-1 is probably coming along. I think both work well for their intended use, but if I'm going on vacation, have enough room for a tripod and a 6' diameter of real estate to place it on, and can throw either into the trunk, the buddipole is most likely making the trip. I would like to see Elecraft market the Buddipole as well under Elecraft colors. The more choices the merrier! just my $.02 73 Paul John <[EMAIL PROTECTED]> wrote: I just returned from a trip to the beach. We had a great time swimming, laying in the sun, and drinking beer but my attempts at Ham Radio were not very successful. I had brought along my K2 and an MP-1 that I had purchased earlier this summer from Elecraft. As usual the K2 worked great but I can't say the same for the MP-1. This is my second one. The first one was replaced by Elecraft because I had stripped the threads on top of the coil trying to get the whip screwed in. Whoever built it had done a terrible job. It was covered with filings and oil and had many sharp edges where it had been machined. I was very surprised because, all in all, the quality of the antenna looked very good except for the final machining and threading. Anyhow, Elecraft replaced it. When the replacement arrived, I took it out of the box and very carefully assembled it. It had the same problems as the first one so I spent some time cleaning the threads using a bolt that I got from the local ACE. Once they were clean, I had no problem screwing everything together. I put it back in the box and set it aside until I our vacation. After enjoying the beach for a couple of days, I set up the station and got ready to work some holiday QSO's but, alas, this didn't happen. The new antenna had a loose connection. It turned out that the hole that the horizontal screw that secures the bottom of the coil was stripped making an intermittent connection. Now I don't know what to do. Do I try to fix it myself, send it back to Elecraft for another replacement, or send it to MP-1? I don't recall how long I have had it other than it was purchased earlier this summer. Has anyone else had similar problems with a new MP-1? John K7SVV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Re: recommended switching supply
I have used the Alinco 330MV for a few years in my shack with no detectable noise until last year. Operating portable with the 330 sitting on top of my K2/100, I did get a little hash on 17m and 20m. It wasn't bad, but with a twist of the "noise offset" knob, it was shifted away. Also, if I moved the 330 a few feet away from the K2, I had no detectable noise. Don't hear the noise with the 330 on top of my 706MKIIG, but the K2 has much better ears! :-) Paul w9bbr [EMAIL PROTECTED] wrote: Like others, I have been using the Alinco 330 switching supply for a couple of years now, and no detectible RF interference. Dave W7AQK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] XV50 for XV144 Swap
Hi - I have a brand new unbuilt XV50 6m transverter that I would like to swap for an un-built OR nicely built XV144 2m transverter. Thanks! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Rig dust covers??
Hi - I remember seeing somebody who made embroidered dust covers for the K2. I'd be interested if someone had their website. Also, I'm looking for a replacement clear plastic cover some of my older larger equipment. Thanks! Paul ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Rig dust covers?? ThanksFolks!
Looks like Stan K7NUU makes the perfect one for the K2. Thanks for all the help! 73 Paul ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] 3 Days left to purchase a 2005 QRP Contest Calendar
I just received my 2005 calander from Ron N3EPA today, and it is GREAT! Chock full of Good Stuff! I encourage everyone to pick one up for the new year. It sure will help bolster the Elecraft to Elecraft contacts and awards and you'll meet a truly nice bunch of folks! Only 4 days left, though - yikes! 73 Paul w9bbr Ron Polityka <[EMAIL PROTECTED]> wrote: Hello, Just a quick note. All calendars that have been ordered as of 00:45 UTC 12 Jan. 2005 will be in the Wednesday evening mail. 15 Jan. is the last day to purchase a 2005 QRP Contest Calendar. Check out: www.n3epa.org Click on: 6th Annual QRP Contest Calendar for 2005 Thanks to all that did purchase a calendar. 72 Ron de N3EPA EPA QRP Club El Presidente' [EMAIL PROTECTED] www.n3epa.org ___ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Fwd: OT: Annoying Noise: problem solved
Note: forwarded message attached. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] OT: Annoying Noise: problem solved
A while back I had a loud noise problem on 20m & 17m which I tracked down to a neighbor's doorbell transformer that was going bad. Then about 7 months ago I encountered a similar extremely loud but "marching" noise that wiped out all but the 80m band with S9 + 20 noise spikes at roughly 1 second intervals. I used an MFJ-852 broadband noise receiver to track it down finally to an area of my house. Since that portion of the house was on one circuit, turning off the breaker confirmed my suspicion by ending the noise abruptly. I then proceeded to turn off everything connected to each outlet one by one. But when I finished the noise was still there. How could that be! Finally after checking all the outlets again, I found a cord going behind my couch in the family room that I assumed to go to a table lamp. It turned out to go to my spare Dewalt 24V Battery charger that I kept upstairs in the house and had forgotten about. Yep! This was the culprit. A simply battery charger created such interference on my attic loop antenna, as to make the bands virtually unusable. I seem to remember reading in the recent ARRL on-line bulletin where the FCC had ruled against the neighbor of a ham who was getting similar interference from the neighbor's Snowmobile Battery Chargers. With so many devices dependent on rechargeable power cells these days, keep an eye out for these inexpensive radio-deafening contraptions. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com