Re: [Elecraft] new firmware release
Thanks,I haven't heard that before, but I will certainly do this from now on. It does seem to involve the MCU module etc. Thanks again. On Dec 11, 2010, at 4:00 PM, G4LNA [via Elecraft] wrote: I used to get problems when I used to download the firmware and used the rig straight away and I found that if I switched the rig on and off twice in a row it functions perfectly after that, so I follow that procedure every time I load the firmware now and never get a problem. View message @ http://elecraft.365791.n2.nabble.com/new-firmware-release-tp5813395p5826846.html To unsubscribe from new firmware release, click here. -- View this message in context: http://elecraft.365791.n2.nabble.com/new-firmware-release-tp5813395p5827141.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] new firmware release
After shutting everything down and letting it set over night, I downloaded v 4.22 from my macbook pro to the k3 without incident and the radio works perfectly. This same thing happened when I tried to install the beta version. Only after shutting down overnight was I able to reinstall v 4.14. My filter configuration looks fine. So now could it be a hookup issue between the macbook pro and the K3? I'm using Prolific driver V1.4.0, K3 utility for mac and I also use MacLoggerDx. The problems downloading firmware were limited to the dsp load. My radio is grounded but the mac was on ac adapter. Thanks. -- View this message in context: http://elecraft.365791.n2.nabble.com/new-firmware-release-tp5813395p5818668.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] new firmware release
I'm new to the K3 and so my settings may be faulty, buy here goes. I downloaded and installed the latest firmware today without problem. My problem is that when I narrow my width to 0.5 I immediately lose all audio. I have a 400 Hz filter installed. I only regain audio with widening the width greater than 500 Hz and by turning off the AGC. This occurs with or without the APF being engaged. Also with APF engaged and with or without AGC I lose all audio and get strong clicks when adjusting the width and APF. Am I missing something in my setup? -- View this message in context: http://elecraft.365791.n2.nabble.com/new-firmware-release-tp5813395p5813395.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
