Re: [Elecraft] [K3] K3 command mode default k30 k31
Hugo pa4la wrote: > > I am playing with my Microham MK2 and have learned that, > > the K3 must be in extended (k31) command mode for the MK2 to switch > correct > between audio or fsk data modes > > When the K3 is powered on, the mode setting is always standard k30. > > Putting the k31 command via a terminal is not a big issue but it would > save > a couple of mouse clicks :) > > Is there a way tot save the k31 setting or a way to make k31 the default > setting? > > Could this not be done with a simple command file, something like "echo k31; >com1" ? - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/K3-command-mode-default-k30-k31-tp3752716p3754290.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] K3 command mode default k30 k31
Hello, 1) Data sub mode is reported (see DT command GET/SET). It is always possible to know the mode in use with the K3 exactly. The MD command is compatible with Kenwood protocol. Adding sub mode to IF string is not a good solution since it breaks the compatibility. DT must be used. 2) About K31... It is a non-issue. A software can easily send K3 at startup but has also to repeat this command in case of the K3 is powered Off. It is different with an external controller (it does not work like a software) ; In the case of the Microham, it must be programmed for adding K31 in front of any command. The lenght of the command is increased by only 4 Bytes. You should suggest this tip to the developper. 73, Laurent F6DEX -- View this message in context: http://n2.nabble.com/K3-command-mode-default-k30-k31-tp3752716p3756295.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] K3 command mode default k30 k31
HI Wayne I think this is possible without big changes !.. Good luck, Laurent F6DEX I think we've beaten this one to death. My goal is to completely eliminate the need for the K2x and K3x meta commands. No more modality, no more issues. Thanks in advance for your patience. Wayne N6KR -- View this message in context: http://n2.nabble.com/K3-command-mode-default-k30-k31-tp3752716p3756375.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] K3 command mode default k30 k31
HI Wayne The day you work on the protocol, contact me again... "my" own list (sent to you) could be updated !. Nothing critical however... Except may be the problems that may result from the CONFIG:VFO OFS=ON and interaction with the Band stacking memory. Anyway K3's protocol is reliable and it is faster than most of the brands. 73, Laurent That's on the list. 73, Wayne N6KR -- View this message in context: http://n2.nabble.com/K3-command-mode-default-k30-k31-tp3752716p3756474.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] K3 command mode default k30 k31
Joe MicroHAM can have two settings (like for two different rigs) : one for K3 "basic" (=K2 in fact) and an other for K3/K31. In the second case it is not a problem if it switches to K31 by adding K31 if necessary. But of course if Wayne removes this "feature" I applaud since I am not convinced it is absolutely required. 73, Laurent F6DEX -- View this message in context: http://n2.nabble.com/K3-command-mode-default-k30-k31-tp3752716p3759463.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
