[Elecraft] K3 KDVR3 DVR memory bug
When using multiple K3 CW memories, they always chain their messages as expected. Pressing a CW "M" button starts keying the K3. While the message is being sent, when a second "M" button is pressed (it could be the same or a different button), the word "CHAIN" is displayed and the second message immediately follows as expected. This works great when calling DX. I store "K1HTV" in the "M1" memory. If I want to drop my call multiple times, I can press the M1 key while the previous message is being sent and get my call sign sent as many times as desired. One would expect the same chaining results on voice modes when using the K3's KDVR3 Digital Voice Recorder (DVR). However this is not the case. It is NOT possible to chain DVR messages! One must wait until the 1st message ends before pressing the same button or a different one. If you press a memory button while playing back the recording in a DVR memory, it can adversely affect the message being played. While playing back a DVR message (i.e. sending your call sign twice), if you press a second "M" button, the first message terminates abruptly after 3 seconds or so. Some times a partial syllable burp is heard. What would it take to correct this DVR anomaly so voice messages can be chained in the same way as CW memory messages? 73, Rich - K1HTV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K3] KDVR3 re-transmiting received audio question
Hi Dale, The TX equalization is saved in a configuration file, so you can save the configuration you have with the TX equalization and then set a flat equalization and save that configuration. It takes a few seconds to restore a configuration but that's one way to change from one to another. Cheers, Fred KE7X Fred Cady "The Elecraft K3: Design, Configuration and Operation 2nd ed" "The Elecraft KX3 - Going for the summit" www.ke7x.com or www.lulu.com (Working on "The Elecraft K-Line: KPA500 and KAT500") fcady at ieee dot org > -Original Message- > From: elecraft-boun...@mailman.qth.net [mailto:elecraft- > boun...@mailman.qth.net] On Behalf Of d...@lightstream.net > Sent: Monday, October 07, 2013 10:55 AM > To: elecraft@mailman.qth.net > Subject: [Elecraft] [K3] KDVR3 re-transmiting received audio question > > I've encountered several instances where being able to play back a > recording of a received SSB station would have been helpful to the > other > op in trying to diagnose a problem (RF feedback, distortion, mic gain > level, etc...) > > A review of the KDVR3 documentation indicates that when re-transmitting > previously received and recorded audio (not a message), the transmitted > audio will be modified by the current TX Equalizer and Compression > settings. For my intended usage, this would not be desirable since the > transmitted audio wouldn't accurately reflect what was received. > > Is there by chance a KDVR3 option that bypasses the TX EQ and > Compressor > when re-transmitting *received* audio? > > 73, Dale > WA8SRA > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] KDVR3 re-transmiting received audio question
I've encountered several instances where being able to play back a recording of a received SSB station would have been helpful to the other op in trying to diagnose a problem (RF feedback, distortion, mic gain level, etc...) A review of the KDVR3 documentation indicates that when re-transmitting previously received and recorded audio (not a message), the transmitted audio will be modified by the current TX Equalizer and Compression settings. For my intended usage, this would not be desirable since the transmitted audio wouldn't accurately reflect what was received. Is there by chance a KDVR3 option that bypasses the TX EQ and Compressor when re-transmitting *received* audio? 73, Dale WA8SRA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 KDVR3 question
I have used KDVR3 for a month. "Receive audio record and playback" is very useful for me to confirm Logged QSO. Only problem for me is to forget to hold AF REC button very often. Is there any way to trigger AF REC automatically ? Thank for any suggestion. 73 aki ja1nlx __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] KDVR3 Problem
Correction to previous post. TAP the MENU button to access the MAIN menu. Rotate VFO B to TX EQ. All eight EQ settings need to be set to zero. Do you have TX DVR settings established in your Config Menu? I have found that any settings (other than zero) entered into this menu can color playback audio that has been recorded. Roy W4WFB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] KDVR3 Problem
Do you have TX DVR settings established in your Config Menu? I have found that any settings (other than zero) entered into this menu can color playback audio that has been recorded. Roy W4WFB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 KDVR3 Digital Voice Recorder
Steve, I had the same problem, though it was intermittent. In my case, once the radio heated up the recording would be truncated, first a little, eventually playing only the first couple of seconds. Elecraft swapped out the KDVR, and it's been OK since. (OT - I spent many hours riding my bicycle up and, less, riding down Rio Verde Drive, just south of you, and my cousin manages the Rio Verde stables just SE of you.) Jim N7US -Original Message- During the 7QP this past weekend my KDVR3 Digital Voice Recorder would upon occasion provide no audio while the transmitter was keyed. I was using N1MM Logger and I do not recall doing anything that might have interrupted the KDVR3 Digital Voice Recorder such as tapping my foot switch while the software had already keyed the transmitter or hitting any additional keys on the keyboard. I found that the only way to get the KDVR3 Digital Voice Recorder back to normal operation was to turn off the K3 and then of course to turn it on again. I hope this is just some kind of cockpit error on my part. I don't recall any such discussions in recent history so please comment if you can... 73, Steve WU9B __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 KDVR3 Digital Voice Recorder
During the 7QP this past weekend my KDVR3 Digital Voice Recorder would upon occasion provide no audio while the transmitter was keyed. I was using N1MM Logger and I do not recall doing anything that might have interrupted the KDVR3 Digital Voice Recorder such as tapping my foot switch while the software had already keyed the transmitter or hitting any additional keys on the keyboard. I found that the only way to get the KDVR3 Digital Voice Recorder back to normal operation was to turn off the K3 and then of course to turn it on again. I hope this is just some kind of cockpit error on my part. I don't recall any such discussions in recent history so please comment if you can... 73, Steve WU9B __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3
The DVR RECORDS pre-Tx filtering and playes back Pre-Tx filtering. 73, Lyle KK7P > ... When > recording with the mic to make a recording to re-TX, is >EQ applied to > this? I'm trying to determine if the EQ is applied >twice... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3
OK, sorry I missed that in the archives. Maybe this question is covered before as well, but here goes. When recording with the mic to make a recording to re-TX, is EQ applied to this? I'm trying to determine if the EQ is applied twice, or just once. Maybe I should make the recordings with TX EQ flat at "0 0 0 0 0 0 0". ...bc NR4C Quoting David Gilbert : > > A quick and easy search of the archives brought up this reply from Lyle > dated June 22 to an earlier post: > > "The DSP treats all TX audio sources the same: FP MIC, RP MIC, Line In, > and DVR. TX EQ and/or CMP will be applied if active in the current mode." > > > > 73, > Dave AB7E > > > > On 11/9/2010 8:50 AM, n...@widomaker.com wrote: >> I think I posed this question before. Does the DVR audio recording get >> passed thru the TX EQ currently set? Or does the TX EQ get set >> temporarily to "0 0 0 0 0 0 0)? I think this would be the best IMHO. I >> have made recordings with two different mics, and then they were >> played back, they didn't sound the same as immediately after recorded. >> I assumed that the first recording was recorded with one TX EQ. Then I >> reset the EQ and made second recording. Now when I play the first >> recording, it sounds different, as if it were being re-EQd by the new >> TX EQ settings. I'd like a real answer to this. >> >> ...bc >> >> >> ps; Hi Roy! >> >> NR4C >> >> >> >> Quoting Jim Cox: >> >>> Yes, this has been a problem here since I got my K3 about a year ago. >>> Others have noticed it when their audio is played back to them making >>> playback on the air almost useless for quality reports. >>> I have reported this problem but nothing has been done to solve it. >>> >>> Hopefully the problem will be fixed in the future. >>> >>> Jim K4JAF >>> >>> >>> - Original Message - >>> From: "Roy Morris" >>> To: >>> Sent: Tuesday, November 09, 2010 6:38 AM >>> Subject: [Elecraft] [K3] KDVR3 >>> >>> >>>> Re-transmitting (on-the-air) an SSB signal that has been recorded >>>> on-the-air results in a very "pinched" audio through the DVR monitor and a >>>> slightly pinched audio reported by those receiving the play-back. The >>>> re-transmission is no longer the faithful reproduction it used to be. >>>> However, the play-back in my K3 without re-transmitting is a faithful >>>> reproduction. This occurs in both of my K3s that have the KDVR3 option. >>>> It occurs in both firmware 4.14 and 4.18. This is NOT an RF feedback >>>> problem. It is also there when using a 50 ohm dummy load. Does anyone >>>> else have this problem? Roy Morris W4WFB >>>> __ >>>> Elecraft mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:Elecraft@mailman.qth.net >>>> >>>> This list hosted by: http://www.qsl.net >>>> Please help support this email list: http://www.qsl.net/donate.html >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3
My view is that the RX situation is fine i.e. you want to record what you hear. However, I think on TX it would be useful to have the option of either:- a) Replaying exactly what you heard - e.g. for other station audio b) Replaying through the EQ, Compression etc - e.g. for contests 73 Stewart G3RXQ On Tue, 09 Nov 2010 07:46:14 -0800, lyle johnson wrote: > The DVR is AFTER the receiver filters (so ti records what > you hear) and BEFORE the tramsmitter filters (so your > voice sounds the same as if you were using amicrophone). > Thus Rx EQ, notch, APF, etc affect what you record, and > Tx EQ, compression, etc., affect what your transmit. > > 73, > > Lyle KK7P/4 > >> ...Does the DVR audio >recording get >> passed thru the TX EQ currently set? Or... > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3
A quick and easy search of the archives brought up this reply from Lyle dated June 22 to an earlier post: "The DSP treats all TX audio sources the same: FP MIC, RP MIC, Line In, and DVR. TX EQ and/or CMP will be applied if active in the current mode." 73, Dave AB7E On 11/9/2010 8:50 AM, n...@widomaker.com wrote: > I think I posed this question before. Does the DVR audio recording get > passed thru the TX EQ currently set? Or does the TX EQ get set > temporarily to "0 0 0 0 0 0 0)? I think this would be the best IMHO. I > have made recordings with two different mics, and then they were > played back, they didn't sound the same as immediately after recorded. > I assumed that the first recording was recorded with one TX EQ. Then I > reset the EQ and made second recording. Now when I play the first > recording, it sounds different, as if it were being re-EQd by the new > TX EQ settings. I'd like a real answer to this. > > ...bc > > > ps; Hi Roy! > > NR4C > > > > Quoting Jim Cox: > >> Yes, this has been a problem here since I got my K3 about a year ago. >> Others have noticed it when their audio is played back to them making >> playback on the air almost useless for quality reports. >> I have reported this problem but nothing has been done to solve it. >> >> Hopefully the problem will be fixed in the future. >> >> Jim K4JAF >> >> >> - Original Message - >> From: "Roy Morris" >> To: >> Sent: Tuesday, November 09, 2010 6:38 AM >> Subject: [Elecraft] [K3] KDVR3 >> >> >>> Re-transmitting (on-the-air) an SSB signal that has been recorded >>> on-the-air results in a very "pinched" audio through the DVR monitor and a >>> slightly pinched audio reported by those receiving the play-back. The >>> re-transmission is no longer the faithful reproduction it used to be. >>> However, the play-back in my K3 without re-transmitting is a faithful >>> reproduction. This occurs in both of my K3s that have the KDVR3 option. >>> It occurs in both firmware 4.14 and 4.18. This is NOT an RF feedback >>> problem. It is also there when using a 50 ohm dummy load. Does anyone >>> else have this problem? Roy Morris W4WFB >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3
The DVR is AFTER the receiver filters (so ti records what you hear) and BEFORE the tramsmitter filters (so your voice sounds the same as if you were using amicrophone). Thus Rx EQ, notch, APF, etc affect what you record, and Tx EQ, compression, etc., affect what your transmit. 73, Lyle KK7P/4 > ...Does the DVR audio >recording get > passed thru the TX EQ currently set? Or... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3
I think I posed this question before. Does the DVR audio recording get passed thru the TX EQ currently set? Or does the TX EQ get set temporarily to "0 0 0 0 0 0 0)? I think this would be the best IMHO. I have made recordings with two different mics, and then they were played back, they didn't sound the same as immediately after recorded. I assumed that the first recording was recorded with one TX EQ. Then I reset the EQ and made second recording. Now when I play the first recording, it sounds different, as if it were being re-EQd by the new TX EQ settings. I'd like a real answer to this. ...bc ps; Hi Roy! NR4C Quoting Jim Cox : > Yes, this has been a problem here since I got my K3 about a year ago. > Others have noticed it when their audio is played back to them making > playback on the air almost useless for quality reports. > I have reported this problem but nothing has been done to solve it. > > Hopefully the problem will be fixed in the future. > > Jim K4JAF > > > - Original Message - > From: "Roy Morris" > To: > Sent: Tuesday, November 09, 2010 6:38 AM > Subject: [Elecraft] [K3] KDVR3 > > >> Re-transmitting (on-the-air) an SSB signal that has been recorded >> on-the-air results in a very "pinched" audio through the DVR monitor and a >> slightly pinched audio reported by those receiving the play-back. The >> re-transmission is no longer the faithful reproduction it used to be. >> However, the play-back in my K3 without re-transmitting is a faithful >> reproduction. This occurs in both of my K3s that have the KDVR3 option. >> It occurs in both firmware 4.14 and 4.18. This is NOT an RF feedback >> problem. It is also there when using a 50 ohm dummy load. Does anyone >> else have this problem? Roy Morris W4WFB >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3
Yes, this has been a problem here since I got my K3 about a year ago. Others have noticed it when their audio is played back to them making playback on the air almost useless for quality reports. I have reported this problem but nothing has been done to solve it. Hopefully the problem will be fixed in the future. Jim K4JAF - Original Message - From: "Roy Morris" To: Sent: Tuesday, November 09, 2010 6:38 AM Subject: [Elecraft] [K3] KDVR3 > Re-transmitting (on-the-air) an SSB signal that has been recorded > on-the-air results in a very "pinched" audio through the DVR monitor and a > slightly pinched audio reported by those receiving the play-back. The > re-transmission is no longer the faithful reproduction it used to be. > However, the play-back in my K3 without re-transmitting is a faithful > reproduction. This occurs in both of my K3s that have the KDVR3 option. > It occurs in both firmware 4.14 and 4.18. This is NOT an RF feedback > problem. It is also there when using a 50 ohm dummy load. Does anyone > else have this problem? Roy Morris W4WFB > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] KDVR3
Re-transmitting (on-the-air) an SSB signal that has been recorded on-the-air results in a very "pinched" audio through the DVR monitor and a slightly pinched audio reported by those receiving the play-back. The re-transmission is no longer the faithful reproduction it used to be. However, the play-back in my K3 without re-transmitting is a faithful reproduction. This occurs in both of my K3s that have the KDVR3 option. It occurs in both firmware 4.14 and 4.18. This is NOT an RF feedback problem. It is also there when using a 50 ohm dummy load. Does anyone else have this problem? Roy Morris W4WFB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3: KDVR3 AF record operation
The main reason that I bought the KDVR3 (apart from the fact that it was a lot cheaper hitching a ride with a P3 than buying it on its own!) was to enable me to produce a continuously looping audio record. Then if I miss a callsign, or something extraordinary happens, I have a record of it. The problem is that I keep forgetting to enable it! Often when you realise that you'd like a recording of something, the moment has been and gone. I should like to be able to configure the operation of the KDVR3 such that it comes on in AF REC mode by default. I have no doubt that I'm in the minority here, but would like to see that option in the future if possible. 73 Stephen G4SJP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 - KDVR3 multiple operator memories
I use the KDVR3 with N1MM. This allows me to use N1MM F-keys to select the 4 KDVR3 memories. I like this setup as I don't need to connect audio to the PC audio card. This way no issues with hum pickup and adjusting audio levels. And the audio coming from the K3 whether using the mike or KDVR3 sounds the same. However, I would like, if possible the following be added: - Record on the fly. It would be nice if you can record while transmitting. This is helpful when running split. As an example, sometimes in a contest when running split on 40M SSB you need to change your listening frequency because someone steps on your listening frequency. Once you find a clear frequency it would be nice if you could record and transmit at the same time your CQ with the new listen frequency. It saves time over first recording than transmitting. - Also for M/M different operators may be sitting in front of the K3. With N1MM the different operators can pre-record their audio so that when they sit down they can select in N1MM a different operator. This way you don't have to record again the new operator's voice. It would be nice if the KDVR3 would allow banks of different recordings based on as an example different operators. 73, N2TK, Tony __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3
>> i just read the instruction manual for the KDVR3, >> there is no hint how the audio is routed... Mic or Line audio is recorded directly to the DVR. Rx Audio is recorded post-filtering (including Rx EQ). DVR audio sent to the Tx is passed through the Tx filters. DVR audio played back directly to the speaker or headphones (not to the Tx) is not filtered (no additional Rx EQ). Note that in the K3 the EQ is *not* a separate filter, but is used in creating the audio bandpass filter. Thus is it not possible to record a signal and not apply the current Rx EQ settings to the recording. 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3
Interesting question, I would want to know this as well. 73 de Tom, DL2RUM DM4iM wrote: > > Elecrafters, > i just read the instruction manual for the KDVR3, > there is no hint how the audio is routed. Questions: > > 1. Is the audio from the mic routed through the tx-eq when recording? > > 2. Or is it routed through tx-eq when played back? (makes sense) > > 3. Is RX-Audio routed through rx-eq when recording? (makes no sense) > > 4. Is recorded rx-audio routed through tx-eq when played back? (makes no > >sense) > > Martin > > -- > > 73, DM4iM > > -- View this message in context: http://n2.nabble.com/KDVR3-tp3749046p3861253.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] KDVR3
Elecrafters, i just read the instruction manual for the KDVR3, there is no hint how the audio is routed. Questions: 1. Is the audio from the mic routed through the tx-eq when recording? 2. Or is it routed through tx-eq when played back? (makes sense) 3. Is RX-Audio routed through rx-eq when recording? (makes no sense) 4. Is recorded rx-audio routed through tx-eq when played back? (makes no sense) Martin -- 73, DM4iM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3 few questions
Many thanks Lyle :-) I'll look forward to its implementation. 73 Geoff G3UCK - Original Message - From: "Lyle Johnson" To: Sent: Thursday, May 21, 2009 2:01 PM Subject: Re: [Elecraft] [K3] KDVR3 few questions >> But one thing I would like to see is MON automatically switched on at a >> predetermined level when txing a recording. This has been mentioned a few >> times on the reflector and may already be on the firmware list. Perhaps >> Lyle >> can confirm? > > I confirm it has been mentioned and is somewhere on the list :-) > > 73, > > Lyle KK7P > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3 few questions
> But one thing I would like to see is MON automatically switched on at a > predetermined level when txing a recording. This has been mentioned a few > times on the reflector and may already be on the firmware list. Perhaps Lyle > can confirm? I confirm it has been mentioned and is somewhere on the list :-) 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3 few questions
Agreed Terry. The KDVR3 is very good. Transmission of a recording of your own voice sounds just like it's live and txing a recording of another station is just like the original reception. Playing a recording of a received transmission on speaker/phones is indistinguishable from live rx. But one thing I would like to see is MON automatically switched on at a predetermined level when txing a recording. This has been mentioned a few times on the reflector and may already be on the firmware list. Perhaps Lyle can confirm? 73 to all Geoff G3UCK - Original Message - From: "Terry Price" To: "'pd0psb'" > To add to this, I have a KDVR3 and it sounds better than a PC or any DVR > I've used in the past. > > Terry __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3 few questions
To add to this, I have a KDVR3 and it sounds better than a PC or any DVR I've used in the past. Terry -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lyle Johnson Sent: Wednesday, May 20, 2009 5:03 PM To: pd0psb Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] [K3] KDVR3 few questions > Some questions about KDVR3: > > -Is this board in between dsp and ad/da converters so that it records > the dsp stream directly? Yes. > -Is soundquality/sample&bitrate equal to the K3 itself without any loss? It uses 16-bit samples. The DSP in the K3 is floating point. > -How many RX soundfiles can it store? One continuous 90-second loop. It also stores 8 messages of up to 15 seconds each. > -Can it "auto-record" controlled by squelch (as a dx/call guard)? Not at present. 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3 few questions
> Some questions about KDVR3: > > -Is this board in between dsp and ad/da converters so that it records the > dsp stream directly? Yes. > -Is soundquality/sample&bitrate equal to the K3 itself without any loss? It uses 16-bit samples. The DSP in the K3 is floating point. > -How many RX soundfiles can it store? One continuous 90-second loop. It also stores 8 messages of up to 15 seconds each. > -Can it "auto-record" controlled by squelch (as a dx/call guard)? Not at present. 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] KDVR3 few questions
Some questions about KDVR3: -Is this board in between dsp and ad/da converters so that it records the dsp stream directly? -Is soundquality/sample&bitrate equal to the K3 itself without any loss? -How many RX soundfiles can it store? -Can it "auto-record" controlled by squelch (as a dx/call guard)? tnx 73' Paul PD0PSB -- View this message in context: http://n2.nabble.com/KDVR3-few-questions-tp2948588p2948588.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3 enable
To all who responded, thank you. It was a firmware issue and loading the latest FW did the trick. I looked in the manual after the install and assumed it would work with older FW. I do remember reading something about the DVR and FW some time ago on the list, but it slipped my mind. That seems to be happening more often as I grow older. Great list, thanks! John k7up At 05:32 PM 28/02/09, you wrote: >Thanks for the quick reply from WA7U and M1PAF...I'll give it a try >later and let you know the results. > >Thanks again, >John > >At 05:11 PM 28/02/09, you wrote: > >I finally installed my KDVR3 today, it's been here for a month or so. > >Things went well during the installation. Used an anti static mat and > >wrist strap. > > > >Powered up, radio played normal. Went into config menu to set the > >KDVR3 to nor. All I get is the dreaded "not inst" msg. Cycled the > >power per instructions hoping the K3 would recognize the DVR, no luck. > > > >Is there a certain level of software I need to install? I'm running > >ver.2.38/1.90. > > > >K3 #501, fourth problem..hope it can be resolved. I've already > >sent it back to Aptos twice to spend a little vacation time with it's > >old friends. > > > >Any ideas, other than to take it apart and do'er again? > > > >John > >k7up > >K3, (2)K2's, K1 > > > >__ > >Elecraft mailing list > >Home: http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/mmfaq.htm > >Post: mailto:Elecraft@mailman.qth.net > > > >This list hosted by: http://www.qsl.net > >Please help support this email list: http://www.qsl.net/donate.html > >__ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3 enable
Thanks for the quick reply from WA7U and M1PAF...I'll give it a try later and let you know the results. Thanks again, John At 05:11 PM 28/02/09, you wrote: >I finally installed my KDVR3 today, it's been here for a month or so. >Things went well during the installation. Used an anti static mat and >wrist strap. > >Powered up, radio played normal. Went into config menu to set the >KDVR3 to nor. All I get is the dreaded "not inst" msg. Cycled the >power per instructions hoping the K3 would recognize the DVR, no luck. > >Is there a certain level of software I need to install? I'm running >ver.2.38/1.90. > >K3 #501, fourth problem..hope it can be resolved. I've already >sent it back to Aptos twice to spend a little vacation time with it's >old friends. > >Any ideas, other than to take it apart and do'er again? > >John >k7up >K3, (2)K2's, K1 > >__ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3 enable
> Is there a certain level of software I need to install? I'm running > ver.2.38/1.90. The DVR will not work with this firmware. DVR support began with 2.64/1.96. 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3 enable
The newer version of the software should take care of the problem. Check the Elecraft web site. 73, WA7U - Original Message - From: "John" To: Sent: Saturday, February 28, 2009 5:11 PM Subject: [Elecraft] [K3] KDVR3 enable >I finally installed my KDVR3 today, it's been here for a month or so. > Things went well during the installation. Used an anti static mat and > wrist strap. > > Powered up, radio played normal. Went into config menu to set the > KDVR3 to nor. All I get is the dreaded "not inst" msg. Cycled the > power per instructions hoping the K3 would recognize the DVR, no luck. > > Is there a certain level of software I need to install? I'm running > ver.2.38/1.90. > > K3 #501, fourth problem..hope it can be resolved. I've already > sent it back to Aptos twice to spend a little vacation time with it's > old friends. > > Any ideas, other than to take it apart and do'er again? > > John > k7up > K3, (2)K2's, K1 > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KDVR3 enable
John-483 wrote: > > Is there a certain level of software I need to install? I'm running > ver.2.38/1.90. > Yes there is a requirement for later firmware for the DVR to work - can't remember which version but there is a note on the reflector about it somewhere. Regards, Paul M1PAF -- View this message in context: http://n2.nabble.com/KDVR3-enable-tp2402714p2402755.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] KDVR3 enable
I finally installed my KDVR3 today, it's been here for a month or so. Things went well during the installation. Used an anti static mat and wrist strap. Powered up, radio played normal. Went into config menu to set the KDVR3 to nor. All I get is the dreaded "not inst" msg. Cycled the power per instructions hoping the K3 would recognize the DVR, no luck. Is there a certain level of software I need to install? I'm running ver.2.38/1.90. K3 #501, fourth problem..hope it can be resolved. I've already sent it back to Aptos twice to spend a little vacation time with it's old friends. Any ideas, other than to take it apart and do'er again? John k7up K3, (2)K2's, K1 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 KDVR3 - Monitoring AF Play
In a recent message, Geoffrey Downs wrote ... > >When transmitting (via AF PLAY) recordings made off air with AF REC, I would >find it a convenience for MON to be automatically switched on at a preset >level for the duration of the replay so that I can hear when I have reached >the end of the recording I want to tx. I am finding exactly the same, Geoff, and am hoping that this problem will be overcome in an early future firmware update. The same applies with outgoing pre-recorded messages. It would be useful if the MON level automatically went up to, say, 30 during playback. 73 -- David G4DMP Leeds, England, UK -- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 KDVR3 - Monitoring AF Play
When transmitting (via AF PLAY) recordings made off air with AF REC, I would find it a convenience for MON to be automatically switched on at a preset level for the duration of the replay so that I can hear when I have reached the end of the recording I want to tx. Normally I don't have the monitor on when txing because I find it distracting. And a press/hold on MON, turning it up to the right level (without accidentally affecting PWR or CMP) and at the same time pressing PTT and AF PLAY can be a walk/chew gum problem (at least for me) when trying to do it quickly :-) Could this be done in firmware? Apologies if someone has already asked. 73 to all Geoff G3UCK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 - KDVR3 FW request
On Jan 25, 2009, at 3:47 AM, ON4WIX wrote: > Hi all, > > I've just finished participating in the UBA SSB contest as a 6h > low-power > entry using my K3/100 and the KDVR3 I installed last week. This setup > was a > joy to use and the KDVR3 certainly relieved the strain my vocal > chords, hi. > The only thing that bothered me a bit was that the KDVR3's playback > loop > cannot be overridden by PTT or VOX. Just fixed this. We'll have a new firmware revision out in a couple of days. 73, Wayne N6KR --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 - KDVR3 FW request
Hi all, I've just finished participating in the UBA SSB contest as a 6h low-power entry using my K3/100 and the KDVR3 I installed last week. This setup was a joy to use and the KDVR3 certainly relieved the strain my vocal chords, hi. The only thing that bothered me a bit was that the KDVR3's playback loop cannot be overridden by PTT or VOX. Each time a station called I had to take one hand off my PC's keyboard to stop the playback. Not really a showstopper but a bit awkward nonetheless. I seem to remember a post stating that playback override by PTT/VOX is on the list of "to-do" items. I hope it makes it to the top of the list soon ;-). Anyway, I had a great time during the contest and my K3 amazes me more everyday. This is one heck of a radio! Thanks all at Elecraft! 73 Glenn ON4WIX / OR4W ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] [K3] KDVR3 now shipping
Hooray! I just received the following from UPS: === This message was sent to you at the request of ELECRAFT to notify you that the package information below has been transmitted to UPS. The package(s) may not have actually been placed with UPS for shipment. To verify when and if the shipment was tendered to UPS and its actual transit status, click on the tracking link below or contact ELECRAFT directly. Important Delivery Information Message from ELECRAFT: Your K3 DVR & manual Scheduled Delivery: 08-December-2008 === K3 is #67 and the DVR was ordered along with the K3 a couple of hours after the announcement posting. vy 73 de toby ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 - KDVR3 shipping
Notified yesterday (12/4/08) that KDVR3 ordered in June of 2007 with K3/100 #474 will be shipping to me in about a week. Terry, W0FM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: SV: [Elecraft] [K3] KDVR3 LaVona-Gramm
Hi Lennart, Toby, this is according to their schedule is it not?? Lennart Michaelsson Based on the shipping page and the order form info at elecraft.com during the last weeks, not to mention personal mails from Wayne several weeks ago, yes, they are more or less on schedule. Based on what they originally, i.e. 1 1/2 years ago, hoped to do, they are slightly behind schedule... ;-) Better late than never, better late and superb, than rushed and shoddy. vy 73 de toby ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] [K3] KDVR3 LaVona-Gramm
Ordered a couple hours after the announcement of the K3, need I say more? Attached is a copy of your KDVR3 invoice. Your KDVR3 is scheduled to ship within the next 1-2 weeks!! vy 73 de toby -- DD5FZ (ex 4n6fz, dj7mgq, dg5mgq, dd5fz) K2 #885, K2/100 #3248, K3/100 #67 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 KDVR3
Is the KDVR3 voice recorder required to record CW into the memories? No, the basic K3 includes CW message memories. Please see page 16 of the Rev D1 Owner's Manual. 73, Lyle KK7P ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 KDVR3
No, but you have to use a paddle to do it 73 de M0XDF, K3 #174 -- For all our conceits about being the center of the universe, we live in a routine planet of a humdrum star stuck away in an obscure corner ... on an unexceptional galaxy which is one of about 100 billion galaxies. ... That is the fundamental fact of the universe we inhabit, and it is very good for us to understand that. -Carl Sagan, astronomer and writer (1934-1996) On 20 Oct 2008, at 21:26, [EMAIL PROTECTED] wrote: Is the KDVR3 voice recorder required to record CW into the memories? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 KDVR3
Is the KDVR3 voice recorder required to record CW into the memories? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] [K3] KDVR3
Oh :-( Hadn't seen that - maybe I get an Xmas present under the tree Thanks (I think) On 11/10/07 18:10, "Bruce Beford" <[EMAIL PROTECTED]> sent: > David Ferrington, M0XDF wrote: > > "Also, KVDR3 (sic) will not be available until Nov anyway." > > Latest shipping status update says mid-December for this option, same for > the KRX3 module. -- The high minded man must care more for the truth than for what people think. -Aristotle, philosopher (384-322 BCE) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] [K3] KDVR3
David Ferrington, M0XDF wrote: "Also, KVDR3 (sic) will not be available until Nov anyway." Latest shipping status update says mid-December for this option, same for the KRX3 module. -Bruce, N1RX ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
