Re: [Elecraft] [KX3] HI CUR error with 2m module
Tried it again today and worked FB. Suspect some cruft in the right angle adaptor or the antenna itself. Some canned air and maybe some DeOxit might be tried if problem reappears... 73, On Sun, Jun 11, 2017 at 4:31 AM Don Wilhelm wrote: > Steve, > > Do you have a dummy load that is good up through 148MHz? > If so, Connect it and see if you get the same error. > If not, investigate your antenna and feedline. > If it is still present, contact K3support. > > 73, > Don W3FPR > > On 6/10/2017 8:08 PM, Steve Ward wrote: > > I'm pretty sure I've seen something about this before. I just got my > > KX3-2M that I ordered at Sea-Pac, and installed it in my radio tonight. > > Everything seems OK except when I try to transmit I get a HI CUR error > > unless I keep output power below 1.2 watts. I'm running from a 35A > > linear PS so supply isn't the issue... > > > > The only thing I saw in the archive was a mention about a loose SMA > > connector, but everything looks OK in that respect. Any thoughts? > > > > Thanks, > > > > Steve > > AD7OG > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to donw...@embarqmail.com > > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [KX3] HI CUR error with 2m module
Steve, Do you have a dummy load that is good up through 148MHz? If so, Connect it and see if you get the same error. If not, investigate your antenna and feedline. If it is still present, contact K3support. 73, Don W3FPR On 6/10/2017 8:08 PM, Steve Ward wrote: I'm pretty sure I've seen something about this before. I just got my KX3-2M that I ordered at Sea-Pac, and installed it in my radio tonight. Everything seems OK except when I try to transmit I get a HI CUR error unless I keep output power below 1.2 watts. I'm running from a 35A linear PS so supply isn't the issue... The only thing I saw in the archive was a mention about a loose SMA connector, but everything looks OK in that respect. Any thoughts? Thanks, Steve AD7OG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to donw...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [KX3] HI CUR error with 2m module
I'm pretty sure I've seen something about this before. I just got my KX3-2M that I ordered at Sea-Pac, and installed it in my radio tonight. Everything seems OK except when I try to transmit I get a HI CUR error unless I keep output power below 1.2 watts. I'm running from a 35A linear PS so supply isn't the issue... The only thing I saw in the archive was a mention about a loose SMA connector, but everything looks OK in that respect. Any thoughts? Thanks, Steve AD7OG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
