Re: [Elecraft] [SPAM?] K3 TX calibration fails after KXV3B and SYN3A upgrade
Thanks Udo. Did you have RF out while the KXV3B was installed? I get no RF either below or above the 12Watt PA changeover point setting on the PWR control. 73, David From: Udo Langenohl - DK5YA [via Elecraft] [mailto:ml-node+s365791n7606338...@n2.nabble.com] Sent: 16 August 2015 11:58 To: David Aslin G3WGN da...@aslinvc.com Subject: Re: [SPAM?] K3 TX calibration fails after KXV3B and SYN3A upgrade David, so did I in June, replaced KXV3-A by KXV3-B, TX calibration always failed. Tried several times: back to KXV3-A, calibration works, again to KXV3-B, calibration failed. Checked TMP's a hundred times, no fail for sure. I didn't replace the SYN-boards. I finally gave up after 1 week of constant dissapointment. Still running old KXV3-A, have a KXV3-B for sale now. Rig: K3 ser. 59xx, ESD workbench. 73 Udo, DK5YA Am 16.08.2015 um 12:38 schrieb Dave G3WGN M6O: I'm hoping there is a quick fix for this (some fat-fingering or brain fade on my part is entirely possible) as the K3 in question is one of four heading to E6GG next month. Yesterday I upgraded S/N 4474 with KXV3B and 2 x SYN3As and while the panels were off, also did the 12V DC Out mod and gold connector replacement mod. I have a full ESD bench and wore a wrist strap at all times. After careful reassembly and TMP cable checks, I was able to update to latest firmware and enable synths and KXV3B. But TX Calibration failed with Calibration power settled at0W; message. I have tried the following remedies: Panels off and examined all boards for correct seating. Examined all TMP cables for correct seating. Replaced panels. Re-attempted Calibration - same error. Re-flashed the firmware load. Load successful. Re-attempted Calibration - same error. Performed EE INIT Loaded a known-good prior configuration (from March 2015 well before the upgrade) Re-attempted Calibration - same error. Any suggestions for next steps gratefully received! 73 David G3WGN WJ6O -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email]/user/SendEmail.jtp?type=nodenode=7606338i=0 This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]/user/SendEmail.jtp?type=nodenode=7606338i=1 -- ** Webs by DK5YA: * http://www.mmmonvhf.de/ [editor]* http://www.vhfdx.de/ [owner] * http://www.palekastro.de/[owner] * http://www.solweb.de/[owner] * http://www.spessartwetter.de/[owner] * ** __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email]/user/SendEmail.jtp?type=nodenode=7606338i=2 This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]/user/SendEmail.jtp?type=nodenode=7606338i=3 If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337p7606338.html To unsubscribe from K3 TX calibration fails after KXV3B and SYN3A upgrade, click herehttp://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_codenode=7606337code=ZGF2aWRAYXNsaW52Yy5jb218NzYwNjMzN3wxMDk4MzMzNTEz. NAMLhttp://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewerid=instant_html%21nabble%3Aemail.namlbase=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespacebreadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337p7606339.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [SPAM?] K3 TX calibration fails after KXV3B and SYN3A upgrade
David, exactly the same here. Udo, DK5YA Am 16.08.2015 um 13:01 schrieb Dave G3WGN M6O: Thanks Udo. Did you have RF out while the KXV3B was installed? I get no RF either below or above the 12Watt PA changeover point setting on the PWR control. 73, David From: Udo Langenohl - DK5YA [via Elecraft] [mailto:ml-node+s365791n7606338...@n2.nabble.com] Sent: 16 August 2015 11:58 To: David Aslin G3WGN da...@aslinvc.com Subject: Re: [SPAM?] K3 TX calibration fails after KXV3B and SYN3A upgrade David, so did I in June, replaced KXV3-A by KXV3-B, TX calibration always failed. Tried several times: back to KXV3-A, calibration works, again to KXV3-B, calibration failed. Checked TMP's a hundred times, no fail for sure. I didn't replace the SYN-boards. I finally gave up after 1 week of constant dissapointment. Still running old KXV3-A, have a KXV3-B for sale now. Rig: K3 ser. 59xx, ESD workbench. 73 Udo, DK5YA Am 16.08.2015 um 12:38 schrieb Dave G3WGN M6O: I'm hoping there is a quick fix for this (some fat-fingering or brain fade on my part is entirely possible) as the K3 in question is one of four heading to E6GG next month. Yesterday I upgraded S/N 4474 with KXV3B and 2 x SYN3As and while the panels were off, also did the 12V DC Out mod and gold connector replacement mod. I have a full ESD bench and wore a wrist strap at all times. After careful reassembly and TMP cable checks, I was able to update to latest firmware and enable synths and KXV3B. But TX Calibration failed with Calibration power settled at0W; message. I have tried the following remedies: Panels off and examined all boards for correct seating. Examined all TMP cables for correct seating. Replaced panels. Re-attempted Calibration - same error. Re-flashed the firmware load. Load successful. Re-attempted Calibration - same error. Performed EE INIT Loaded a known-good prior configuration (from March 2015 well before the upgrade) Re-attempted Calibration - same error. Any suggestions for next steps gratefully received! 73 David G3WGN WJ6O -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email]/user/SendEmail.jtp?type=nodenode=7606338i=0 This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]/user/SendEmail.jtp?type=nodenode=7606338i=1 -- ** Webs by DK5YA: * http://www.mmmonvhf.de/ [editor]* http://www.vhfdx.de/ [owner] * http://www.palekastro.de/[owner] * http://www.solweb.de/[owner] * http://www.spessartwetter.de/[owner] * ** __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email]/user/SendEmail.jtp?type=nodenode=7606338i=2 This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]/user/SendEmail.jtp?type=nodenode=7606338i=3 If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337p7606338.html To unsubscribe from K3 TX calibration fails after KXV3B and SYN3A upgrade, click herehttp://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_codenode=7606337code=ZGF2aWRAYXNsaW52Yy5jb218NzYwNjMzN3wxMDk4MzMzNTEz. NAMLhttp://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewerid=instant_html%21nabble%3Aemail.namlbase=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespacebreadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337p7606339.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to dk...@dk5ya.de -- ** Webs by DK5YA: *
Re: [Elecraft] [SPAM?] K3 TX calibration fails after KXV3B and SYN3A upgrade
Thanks. Time to talk to Elecraft, I think! 73, David From: Udo Langenohl - DK5YA [via Elecraft] [mailto:ml-node+s365791n7606340...@n2.nabble.com] Sent: 16 August 2015 12:11 To: David Aslin G3WGN da...@aslinvc.com Subject: Re: [SPAM?] K3 TX calibration fails after KXV3B and SYN3A upgrade David, exactly the same here. Udo, DK5YA Am 16.08.2015 um 13:01 schrieb Dave G3WGN M6O: Thanks Udo. Did you have RF out while the KXV3B was installed? I get no RF either below or above the 12Watt PA changeover point setting on the PWR control. 73, David From: Udo Langenohl - DK5YA [via Elecraft] [mailto:[hidden email]/user/SendEmail.jtp?type=nodenode=7606340i=0] Sent: 16 August 2015 11:58 To: David Aslin G3WGN [hidden email]/user/SendEmail.jtp?type=nodenode=7606340i=1 Subject: Re: [SPAM?] K3 TX calibration fails after KXV3B and SYN3A upgrade David, so did I in June, replaced KXV3-A by KXV3-B, TX calibration always failed. Tried several times: back to KXV3-A, calibration works, again to KXV3-B, calibration failed. Checked TMP's a hundred times, no fail for sure. I didn't replace the SYN-boards. I finally gave up after 1 week of constant dissapointment. Still running old KXV3-A, have a KXV3-B for sale now. Rig: K3 ser. 59xx, ESD workbench. 73 Udo, DK5YA Am 16.08.2015 um 12:38 schrieb Dave G3WGN M6O: I'm hoping there is a quick fix for this (some fat-fingering or brain fade on my part is entirely possible) as the K3 in question is one of four heading to E6GG next month. Yesterday I upgraded S/N 4474 with KXV3B and 2 x SYN3As and while the panels were off, also did the 12V DC Out mod and gold connector replacement mod. I have a full ESD bench and wore a wrist strap at all times. After careful reassembly and TMP cable checks, I was able to update to latest firmware and enable synths and KXV3B. But TX Calibration failed with Calibration power settled at0W; message. I have tried the following remedies: Panels off and examined all boards for correct seating. Examined all TMP cables for correct seating. Replaced panels. Re-attempted Calibration - same error. Re-flashed the firmware load. Load successful. Re-attempted Calibration - same error. Performed EE INIT Loaded a known-good prior configuration (from March 2015 well before the upgrade) Re-attempted Calibration - same error. Any suggestions for next steps gratefully received! 73 David G3WGN WJ6O -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email]/user/SendEmail.jtp?type=nodenode=7606338i=0 This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]/user/SendEmail.jtp?type=nodenode=7606338i=1 -- ** Webs by DK5YA: * http://www.mmmonvhf.de/ [editor]* http://www.vhfdx.de/ [owner] * http://www.palekastro.de/[owner] * http://www.solweb.de/[owner] * http://www.spessartwetter.de/[owner] * ** __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email]/user/SendEmail.jtp?type=nodenode=7606338i=2 This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]/user/SendEmail.jtp?type=nodenode=7606338i=3 If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337p7606338.html To unsubscribe from K3 TX calibration fails after KXV3B and SYN3A upgrade, click here NAMLhttp://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewerid=instant_html%21nabble%3Aemail.namlbase=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespacebreadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337p7606339.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm
Re: [Elecraft] [SPAM?] K3 TX calibration fails after KXV3B and SYN3A upgrade
David, so did I in June, replaced KXV3-A by KXV3-B, TX calibration always failed. Tried several times: back to KXV3-A, calibration works, again to KXV3-B, calibration failed. Checked TMP's a hundred times, no fail for sure. I didn't replace the SYN-boards. I finally gave up after 1 week of constant dissapointment. Still running old KXV3-A, have a KXV3-B for sale now. Rig: K3 ser. 59xx, ESD workbench. 73 Udo, DK5YA Am 16.08.2015 um 12:38 schrieb Dave G3WGN M6O: I'm hoping there is a quick fix for this (some fat-fingering or brain fade on my part is entirely possible) as the K3 in question is one of four heading to E6GG next month. Yesterday I upgraded S/N 4474 with KXV3B and 2 x SYN3As and while the panels were off, also did the 12V DC Out mod and gold connector replacement mod. I have a full ESD bench and wore a wrist strap at all times. After careful reassembly and TMP cable checks, I was able to update to latest firmware and enable synths and KXV3B. But TX Calibration failed with Calibration power settled at0W; message. I have tried the following remedies: Panels off and examined all boards for correct seating. Examined all TMP cables for correct seating. Replaced panels. Re-attempted Calibration - same error. Re-flashed the firmware load. Load successful. Re-attempted Calibration - same error. Performed EE INIT Loaded a known-good prior configuration (from March 2015 well before the upgrade) Re-attempted Calibration - same error. Any suggestions for next steps gratefully received! 73 David G3WGN WJ6O -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to dk...@dk5ya.de -- ** Webs by DK5YA: * http://www.mmmonvhf.de/ [editor]* http://www.vhfdx.de/ [owner] * http://www.palekastro.de/[owner] * http://www.solweb.de/[owner] * http://www.spessartwetter.de/[owner] * ** __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com