[Elecraft] I/O mod kit REMIOUPGD (P/N E850235)
W0MU Mike Fatchett wrote: For those wanting TTL outputs on the I/O board (Mike incorrectly stated E850237), you may now replace your old board with a new one. $15.00 ($20 is correct) plus shipping. This is an alternative to soldering the 2.2k resistors on the old board. For the record, I'm posting this response from Lyle KK7P to me (his comments preceded by ###): Which of the following mods involving the KIO3 does this affect? http://www.elecraft.com/K3/k3_app_notes.htm ###I'm not sure I understand the question, but I'll try and answer anyway. ###I assume by E850237 you mean the KIO3 Remote (aka Digital) IO board that is included in the REMIOUPGD mod kit. I believe the correct part number for this is E850235. **K3 AF OutPut Mod Kit* http://www.elecraft.com/K3/mods/AF_Output_Mod_Rev_C.pdf ###No impact, not part of the digital IO board. **Improving the Immunity of the Rear-Panel RS232 and Audio Connectors to RF http://www.elecraft.com/K3/mods/ELECRAFT_Application_Note_Improving_the_Immunity_of_the_Rear-Panel_KIO3_RS232_and_Audio_Connectors_to_RF.pdf ###Ground return inductor mod on the RS232 port only. ###The RFI mods list some optional inductor bypasses. The optional ones are not done on the new board; they are still optional based on your shack, environment and station system design. **K3 AF Mod kit http://www.elecraft.com/K3/mods/K3_AF_Stage_Upgrade_Instructions_Rev_B.pdf ###No impact, not part of the digital IO board. **K3 Negative ALC and Ext Band Data Pull-up Mods http://www.elecraft.com/K3/mods/K3ALCMod_Rev_B.pdf ###Does the digital IO board portion. The RF board cuts portion *must* still be done. To summarize: 1. The board involved is the KIO3 Remote IO (aka Digital) Board, P/N E850235 and is available for $20 plus shipping as REMIOUPGD on this page: http://www.elecraft.com/order_form_parts.htm#K3%20Parts 2. Installing this board can be done in lieu of grounding the RS232 Ground Choke on the Remote I/O Module as shown in Figure 5 of the mod Improving the Immunity of the Rear-Panel RS232 and Audio Connectors to RF. The other parts of this mod on page 3, affecting the KIO3 Audio I/O Module, must still be performed. 3. Installing this board can be done in lieu of pages 3-4 of the mod K3 Negative ALC and Ext Band Data Pull-up Mods. However, cutting the two traces on the RF board (under the bottom front cover) must still be performed as shown on page 2 of the mod instructions. I hope this clears up any confusion. Hopefully I got everything right (please correct me if I didn't Lyle). 73, Bill W4ZV -- View this message in context: http://n2.nabble.com/New-I-O-mod-kit-E850237-tp2312165p2436405.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] I/O mod kit REMIOUPGD (P/N E850235)
I went this route and updated (2) K3's with the E850235 boards. The boards are $20 verses the kit with some resistors spec. to 1% is $15. 73 de KE4WY Jim -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill W4ZV Sent: Friday, March 06, 2009 10:39 AM To: elecraft@mailman.qth.net Subject: [Elecraft] I/O mod kit REMIOUPGD (P/N E850235) W0MU Mike Fatchett wrote: For those wanting TTL outputs on the I/O board (Mike incorrectly stated E850237), you may now replace your old board with a new one. $15.00 ($20 is correct) plus shipping. This is an alternative to soldering the 2.2k resistors on the old board. For the record, I'm posting this response from Lyle KK7P to me (his comments preceded by ###): Which of the following mods involving the KIO3 does this affect? http://www.elecraft.com/K3/k3_app_notes.htm ###I'm not sure I understand the question, but I'll try and answer anyway. ###I assume by E850237 you mean the KIO3 Remote (aka Digital) IO board that is included in the REMIOUPGD mod kit. I believe the correct part number for this is E850235. **K3 AF OutPut Mod Kit* http://www.elecraft.com/K3/mods/AF_Output_Mod_Rev_C.pdf ###No impact, not part of the digital IO board. **Improving the Immunity of the Rear-Panel RS232 and Audio Connectors to RF http://www.elecraft.com/K3/mods/ELECRAFT_Application_Note_Improving_the_Imm unity_of_the_Rear-Panel_KIO3_RS232_and_Audio_Connectors_to_RF.pdf ###Ground return inductor mod on the RS232 port only. ###The RFI mods list some optional inductor bypasses. The optional ones are not done on the new board; they are still optional based on your shack, environment and station system design. **K3 AF Mod kit http://www.elecraft.com/K3/mods/K3_AF_Stage_Upgrade_Instructions_Rev_B.pdf ###No impact, not part of the digital IO board. **K3 Negative ALC and Ext Band Data Pull-up Mods http://www.elecraft.com/K3/mods/K3ALCMod_Rev_B.pdf ###Does the digital IO board portion. The RF board cuts portion *must* still be done. To summarize: 1. The board involved is the KIO3 Remote IO (aka Digital) Board, P/N E850235 and is available for $20 plus shipping as REMIOUPGD on this page: http://www.elecraft.com/order_form_parts.htm#K3%20Parts 2. Installing this board can be done in lieu of grounding the RS232 Ground Choke on the Remote I/O Module as shown in Figure 5 of the mod Improving the Immunity of the Rear-Panel RS232 and Audio Connectors to RF. The other parts of this mod on page 3, affecting the KIO3 Audio I/O Module, must still be performed. 3. Installing this board can be done in lieu of pages 3-4 of the mod K3 Negative ALC and Ext Band Data Pull-up Mods. However, cutting the two traces on the RF board (under the bottom front cover) must still be performed as shown on page 2 of the mod instructions. I hope this clears up any confusion. Hopefully I got everything right (please correct me if I didn't Lyle). 73, Bill W4ZV -- View this message in context: http://n2.nabble.com/New-I-O-mod-kit-E850237-tp2312165p2436405.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] I/O mod kit REMIOUPGD (P/N E850235)
I have no clue what I received then. I will have to try to find the receipt. What board ships with new K3's? I think it is the one that has some of the mods and the pull up resistors for TTL levels. A slip of the foot you may soon recover, but a slip of the tongue you may never get over. Ben Franklin -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Sent: Friday, March 06, 2009 9:13 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] I/O mod kit REMIOUPGD (P/N E850235) I went this route and updated (2) K3's with the E850235 boards. The boards are $20 verses the kit with some resistors spec. to 1% is $15. 73 de KE4WY Jim -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill W4ZV Sent: Friday, March 06, 2009 10:39 AM To: elecraft@mailman.qth.net Subject: [Elecraft] I/O mod kit REMIOUPGD (P/N E850235) W0MU Mike Fatchett wrote: For those wanting TTL outputs on the I/O board (Mike incorrectly stated E850237), you may now replace your old board with a new one. $15.00 ($20 is correct) plus shipping. This is an alternative to soldering the 2.2k resistors on the old board. For the record, I'm posting this response from Lyle KK7P to me (his comments preceded by ###): Which of the following mods involving the KIO3 does this affect? http://www.elecraft.com/K3/k3_app_notes.htm ###I'm not sure I understand the question, but I'll try and answer anyway. ###I assume by E850237 you mean the KIO3 Remote (aka Digital) IO board that is included in the REMIOUPGD mod kit. I believe the correct part number for this is E850235. **K3 AF OutPut Mod Kit* http://www.elecraft.com/K3/mods/AF_Output_Mod_Rev_C.pdf ###No impact, not part of the digital IO board. **Improving the Immunity of the Rear-Panel RS232 and Audio Connectors to RF http://www.elecraft.com/K3/mods/ELECRAFT_Application_Note_Improving_the_Imm unity_of_the_Rear-Panel_KIO3_RS232_and_Audio_Connectors_to_RF.pdf ###Ground return inductor mod on the RS232 port only. ###The RFI mods list some optional inductor bypasses. The optional ones are not done on the new board; they are still optional based on your shack, environment and station system design. **K3 AF Mod kit http://www.elecraft.com/K3/mods/K3_AF_Stage_Upgrade_Instructions_Rev_B.pdf ###No impact, not part of the digital IO board. **K3 Negative ALC and Ext Band Data Pull-up Mods http://www.elecraft.com/K3/mods/K3ALCMod_Rev_B.pdf ###Does the digital IO board portion. The RF board cuts portion *must* still be done. To summarize: 1. The board involved is the KIO3 Remote IO (aka Digital) Board, P/N E850235 and is available for $20 plus shipping as REMIOUPGD on this page: http://www.elecraft.com/order_form_parts.htm#K3%20Parts 2. Installing this board can be done in lieu of grounding the RS232 Ground Choke on the Remote I/O Module as shown in Figure 5 of the mod Improving the Immunity of the Rear-Panel RS232 and Audio Connectors to RF. The other parts of this mod on page 3, affecting the KIO3 Audio I/O Module, must still be performed. 3. Installing this board can be done in lieu of pages 3-4 of the mod K3 Negative ALC and Ext Band Data Pull-up Mods. However, cutting the two traces on the RF board (under the bottom front cover) must still be performed as shown on page 2 of the mod instructions. I hope this clears up any confusion. Hopefully I got everything right (please correct me if I didn't Lyle). 73, Bill W4ZV -- View this message in context: http://n2.nabble.com/New-I-O-mod-kit-E850237-tp2312165p2436405.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html