Re: [Elecraft] CW-to-Data does not work
Strangest thing!! Could not get CW decode to work under 4.22. Loaded 4.18 and it decodes like a champ. Reload 4.22 and the champ is still there! Go figure! -- 73, Dick KA1OZ Middleborough, MA Radio: Elecraft K3/100(Kit) SN 859 Antenna: Titan-DX Dick Roth, KA1OZ wrote: > I just noticed last night that my K3 #859 wasn't decoding CW. I'm > running 4.22 firmware. I might go back to 4.17 to see if the function > returns. > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] CW-to-Data does not work
I just noticed last night that my K3 #859 wasn't decoding CW. I'm running 4.22 firmware. I might go back to 4.17 to see if the function returns. -- 73, Dick KA1OZ Middleborough, MA Radio: Elecraft K3/100(Kit) SN 859 Antenna: Titan-DX Dick Dievendorff wrote: > Hi, Ben! > > My Elecraft K3 wouldn't work on SSB this sweepstakes weekend, either! I > found that I had somehow lost the correct 2.7 kHz crystal filter offset (I > alter the configuration of my radios a lot because my job requires it). I > removed the crystal filter, noted the -0.91 offset, and put that number into > the K3 Utility's crystal filter configuration dialog. Worked like a champ. > I sure felt sheepish, though! > > A more drastic step if that doesn't work is to go through the Parameter > Initialization procedure described on page 68 of the K3 Owner's Manual (I'm > using revision D8). If that doesn't work, contact K3support at Elecraft.com > > For RTTY decoding, most of the people I talk to with this problem would get > better results if they used the CW TUN display to correctly tune in the > signal, or perhaps Text Decode hasn't been turned on. My tone sense isn't > good enough to do this without a visual tuning aid. You kind of need to > have the signal relatively alone; maybe a big DX pileup isn't the best place > to try to get this working. One of the external RTTY decoders, like MMTTY, > might be a better choice for a more ambitious RTTY decoder for a "hostile" > DX pileup environment. > > GL with ZL8X! > > 73 de Dick, K6KR > > > -Original Message- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of SM6CKU > Sent: Tuesday, November 23, 2010 4:25 AM > To: elecraft@mailman.qth.net > Subject: [Elecraft] CW-to-Data does not work > > as it did a year ago. I have wkd one QSO on RTTY and just heard ZL8X on 30m > with good copy. So I tried to call but nothing happens and I have followed > the manual instructions. Any hint? > And my K3 (2066) won't work on SSB either > On the other end, it's great on CW! > > 73 de Ben SM6CKU > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] CW-to-Data does not work
Hi, Ben! My Elecraft K3 wouldn't work on SSB this sweepstakes weekend, either! I found that I had somehow lost the correct 2.7 kHz crystal filter offset (I alter the configuration of my radios a lot because my job requires it). I removed the crystal filter, noted the -0.91 offset, and put that number into the K3 Utility's crystal filter configuration dialog. Worked like a champ. I sure felt sheepish, though! A more drastic step if that doesn't work is to go through the Parameter Initialization procedure described on page 68 of the K3 Owner's Manual (I'm using revision D8). If that doesn't work, contact K3support at Elecraft.com For RTTY decoding, most of the people I talk to with this problem would get better results if they used the CW TUN display to correctly tune in the signal, or perhaps Text Decode hasn't been turned on. My tone sense isn't good enough to do this without a visual tuning aid. You kind of need to have the signal relatively alone; maybe a big DX pileup isn't the best place to try to get this working. One of the external RTTY decoders, like MMTTY, might be a better choice for a more ambitious RTTY decoder for a "hostile" DX pileup environment. GL with ZL8X! 73 de Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of SM6CKU Sent: Tuesday, November 23, 2010 4:25 AM To: elecraft@mailman.qth.net Subject: [Elecraft] CW-to-Data does not work as it did a year ago. I have wkd one QSO on RTTY and just heard ZL8X on 30m with good copy. So I tried to call but nothing happens and I have followed the manual instructions. Any hint? And my K3 (2066) won't work on SSB either On the other end, it's great on CW! 73 de Ben SM6CKU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] CW-to-Data does not work
as it did a year ago. I have wkd one QSO on RTTY and just heard ZL8X on 30m with good copy. So I tried to call but nothing happens and I have followed the manual instructions. Any hint? And my K3 (2066) won't work on SSB either On the other end, it's great on CW! 73 de Ben SM6CKU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
