Re: [Elecraft] Computer won't connect with kx3
Sorry was not clear. Should have said the KX3 defaulted to 4800 and if you have not reset it after you added the amp you need to reset to 38400. -- View this message in context: http://elecraft.365791.n2.nabble.com/Computer-won-t-connect-with-kx3-tp7585628p7585644.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Computer won't connect with kx3
Correction Bob, The KX3 is capable of up to 38400 baud rate. Check the KX3 RS232 menu parameter. Yes, it defaults to 4800, but for firmware downloads, it is automatically set to 38400. Set it to whatever your control application is using. 73, Don W3FPR On 3/18/2014 9:51 PM, Bob N3MNT wrote: Check the baudrate. The KX3 used a lower baud rate. The KXPA100 connection needs 38400. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Computer won't connect with kx3
Check the baudrate. The KX3 used a lower baud rate. The KXPA100 connection needs 38400. -- View this message in context: http://elecraft.365791.n2.nabble.com/Computer-won-t-connect-with-kx3-tp7585628p7585636.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Computer won't connect with kx3
Roger, That sounds like you might have a bad KXUSB cable. You may have 2 of them, one which came with the KX3 and another that came with the KXPA100. Try both of them on the KX3 alone. If it works there, then introduce the KXPA100 to the same cable. Do not change USB jacks - often the operating system will change the assigned COM port if you change the USB port that the cable is plugged into. 73, Don W3FPR On 3/18/2014 3:23 PM, Roger Brisson wrote: I received my KXPA100 with tuner and hooked it all up. I use macloggerDX for logging and connection to my kx3. I plug the computer into the kxpa100 where it shows but the computer does not find the kx3. I check the serial port and it is the same I was using before. I downloaded the driver again and still not making a connection. I then tried connecting directly to the kx3 but still not finding it? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Computer won't connect with kx3
I received my KXPA100 with tuner and hooked it all up. I use macloggerDX for logging and connection to my kx3. I plug the computer into the kxpa100 where it shows but the computer does not find the kx3. I check the serial port and it is the same I was using before. I downloaded the driver again and still not making a connection. I then tried connecting directly to the kx3 but still not finding it? AB1SX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
