Re: [Elecraft] D19 shorting out in K1

[Don Wilhelm]

Jim,

D19 is intended to sacrifice itself instead of the PA transistor from 
events like high SWR or power supply surges.


That means your antenna switching is likely producing a voltage spike 
when switching.


Possibilities that I can think of include switching an antenna which has 
a bias T network associated with it, or somehow your power supply is 
producing a spike when you switch the antenna.


There is nothing in the K1 itself which would cause it (unless the K1 is 
transmitting when the antenna is switched).


73,
Don W3FPR

On 3/12/2018 8:08 AM, Jim Ragsdale wrote:
I've been wondering if anyone else has experienced this. I have a K1 
with the KAT1 ATU and am using an A/B switch to swap antennas. Three 
times now when I swap antennas with the power on the K1, it shorts out 
diode D19 in the final. I can solve the problem by always powering down 
before the swap, but sometimes I forget to do that (has nothing do with 
my age. HI).

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] D19 shorting out in K1

[Greg Troxel]

Jim Ragsdale  writes:

> I've been wondering if anyone else has experienced this. I have a K1
> with the KAT1 ATU and am using an A/B switch to swap antennas. Three
> times now when I swap antennas with the power on the K1, it shorts out
> diode D19 in the final. I can solve the problem by always powering
> down before the swap, but sometimes I forget to do that (has nothing
> do with my age. HI).
>
> Any thoughts?

Are you really sure there is no electrostatic charge on the antenna you
are switching to?  Do you have a bleeder resistor, or does the switch
ground the unused antenna?

73 de n1dam
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] D19 shorting out in K1

[Jim Ragsdale]

I've been wondering if anyone else has experienced this. I have a K1 
with the KAT1 ATU and am using an A/B switch to swap antennas. Three 
times now when I swap antennas with the power on the K1, it shorts out 
diode D19 in the final. I can solve the problem by always powering down 
before the swap, but sometimes I forget to do that (has nothing do with 
my age. HI).


Any thoughts?

73, Jim W5LA

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com