Re: [Elecraft] DTMF Tones on the K3
…unless you are digging weak signals out of the moon using it as an IF rig. Never such as thing as too much performance in an IF rig. I can see why EME-ers just want a little bit more. One of my Elmers, Al, W0PUF and I participated in the 1995 ARRL EME Contest with a Scientific Atlanta 10m dish spec’d for 4 GHz and a TS-700SP/HB amp with a pair of 4CX250Bs with an Ameco Rx conveter with no pre-amp…and got five QSOs from the W0BLK Club station out near Ellsworth AFB in Box Elder, SD. Worked the big guns only, like Al, WB5LUA and KB8RQ to name two. Ah, memories…I remember when we were working on the feed in the bird bath mode and a flock of migrating Sand Hill cranes were going south for the winter in formation directly overhead. I was in the focal point of that 30 foot dish and told Al on my HT to watch the flock as I made some noise. So Al got out the door in time to hear me issue some vocal shotgun blasts, “BOOM, BOOM, BOOM!” I shouted and be darned if they didn’t scatter…Awesome. They were way up there, like 10,000 feet maybe, who knows but I could hear them as if they were right there, trumpeting away. I miss Al. Myron WV0H Printed on Recycled Data From: Kevin Stover Sent: Wednesday, June 1, 2016 6:44 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] DTMF Tones on the K3 I'm probably going to regret sending this and this is just my opinion. It seems to me using the K3 as a V/UHF FM rig is akin to using a Thoroughbred race horse to pull a manure spreader. Yeahit'll do it but there are better tools to use. One thing the Japanese are better at is designing inexpensive, full featured V/UHF FM gear. K3 and my Yaesu FT-8900 sitting next to each other and I want to blah,blah,blah on the local repeater. The Yaesu will get used 99.995% of the time. Sorry Elecraftyou aren't even in the neighborhood on this one. On 6/1/2016 8:31 AM, R Stanley Sutton wrote: > I add my vote to getting this done on the K3. > > Stan KD8KBX > > > -- R. Kevin Stover AC0H ARRL FISTS #11993 SKCC #215 NAQCC #3441 --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to thelas...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] DTMF Tones on the K3
I bought my K3S/10 for use mostly with a 2 meter transverter for EME work and 6 meters (easily drives my LDMOS SSPA to 1 KW. My interest in HF is..passing Ken, AH6LE At 04:41 PM 6/1/2016, Kevin Stover wrote: I'm probably going to regret sending this and this is just my opinion. It seems to me using the K3 as a V/UHF FM rig is akin to using a Thoroughbred race horse to pull a manure spreader. Yeahit'll do it but there are better tools to use. One thing the Japanese are better at is designing inexpensive, full featured V/UHF FM gear. K3 and my Yaesu FT-8900 sitting next to each other and I want to blah,blah,blah on the local repeater. The Yaesu will get used 99.995% of the time. Sorry Elecraftyou aren't even in the neighborhood on this one. On 6/1/2016 8:31 AM, R Stanley Sutton wrote: I add my vote to getting this done on the K3. Stan KD8KBX -- R. Kevin Stover AC0H ARRL FISTS #11993 SKCC #215 NAQCC #3441 --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@arcomcontrollers.com -- President and CTO - Arcom Communications Makers of repeater controllers and accessories. http://www.arcomcontrollers.com/ Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net "We don't just make 'em. We use 'em!" __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] DTMF Tones on the K3
I'm probably going to regret sending this and this is just my opinion. It seems to me using the K3 as a V/UHF FM rig is akin to using a Thoroughbred race horse to pull a manure spreader. Yeahit'll do it but there are better tools to use. One thing the Japanese are better at is designing inexpensive, full featured V/UHF FM gear. K3 and my Yaesu FT-8900 sitting next to each other and I want to blah,blah,blah on the local repeater. The Yaesu will get used 99.995% of the time. Sorry Elecraftyou aren't even in the neighborhood on this one. On 6/1/2016 8:31 AM, R Stanley Sutton wrote: I add my vote to getting this done on the K3. Stan KD8KBX -- R. Kevin Stover AC0H ARRL FISTS #11993 SKCC #215 NAQCC #3441 --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] DTMF Tones on the K3
Many thanks, Joe and Don, for that useful information which I shall keep in mind. I would, however, like to continue using my D104 microphone with which I receive outstanding good quality reports. 73 de David G4DMP In a recent message, Don Wilhelm writes >I agree with Joe, but there is a typo - the brown wire should end up on >pin 6. > >73, >Don W3FPR > >On 6/1/2016 10:03 AM, Joe Subich, W4TV wrote: >> >> Pick up a Kenwood MC-48, move the brown wire from pin 5 to pin 5 in the >> mic connector and be done with it. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] DTMF Tones on the K3
I agree with Joe, but there is a typo - the brown wire should end up on pin 6. 73, Don W3FPR On 6/1/2016 10:03 AM, Joe Subich, W4TV wrote: Pick up a Kenwood MC-48, move the brown wire from pin 5 to pin 5 in the mic connector and be done with it. Overloading the K3/K3S front panel buttons with yet a *third* function is a recipe for disaster. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] DTMF Tones on the K3
Pick up a Kenwood MC-48, move the brown wire from pin 5 to pin 5 in the mic connector and be done with it. Overloading the K3/K3S front panel buttons with yet a *third* function is a recipe for disaster. 73, ... Joe, W4TV On 6/1/2016 9:31 AM, R Stanley Sutton wrote: I add my vote to getting this done on the K3. Stan KD8KBX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to li...@subich.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] DTMF Tones on the K3
I add my vote to getting this done on the K3. Stan KD8KBX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com