Joshua,
Start out taking it one step at a time.
Receive first --
All you need to receive data modes is to connect the KX3 headphone jack
to the soundcard line in. Fldigi should show you some signals.
Configure the soundcard Line In level as well as adjust the KX3 AF
Gain. Set the mode in the KX3 to DATA A for PSK31 and to AFSK A for RTTY.
Then RIG Control --
Next connect the computer COM port to the ACC1 jack and configure Fldigi
to use hamlib or rigcat through that port and you should see the
frequency on the Fldigi screen.
Then Transmit --
Transmit is the last step - connect the soundcard line out (or speaker)
to the KX3 microphone jack and adjust the soundcard, adjust the
soundcard output level and the KX3 mic gain to produce 4 bars solid with
the 5th flickering on the KX3 ALC meter.
Once you have those 3 connections working you should be up and running.
73,
Don W3FPR
On 5/5/2015 11:44 PM, Joshua Gould wrote:
So, I'm wanting to get my feet wet with some digital modes (mainly PSK31
and RTTY right now). I have the KXPKT cable set and a Logitech USB sound
card. Now what?
I already have FLDigi. I connected everything up once and got diddly, so I
don't know what I did wrong (Also, if it's any help, if I tune in a CW
signal, I get nothing out of the terminal tab in the KX3 Utility.) No clue
why either...
Any suggestions?
72,
Joshua Gould
K8WXA
EM89pn
KX3 # 7480
NAQCC # 7704
OMISS # 9948
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w3...@embarqmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
