Hello Srewart, I am on ntlworld.com and I have just checked my down load speed 11.07Hrs 04/02/2009 and it is very fast, no delay at all. Maybe you have a problem somewhere in the system.
73 de Barry G4DBS K2/100 owner. elecraft-requ...@mailman.qth.net wrote: > Send Elecraft mailing list submissions to > elecraft@mailman.qth.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://mailman.qth.net/mailman/listinfo/elecraft > or, via email, send a message with subject or body 'help' to > elecraft-requ...@mailman.qth.net > > You can reach the person managing the list at > elecraft-ow...@mailman.qth.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Elecraft digest..." > > > Today's Topics: > > 1. Re: RTTY problem (Ed Steeble) > 2. Re: ATU Manual Adjust not working ? (wayne burdick) > 3. K3 Mods or Updates (W0MU Mike Fatchett) > 4. Re: K3 Mods or Updates (Lyle Johnson) > 5. ATU Manual Adjust not working ? (Mike Scott) > 6. Elecraft Web Site - speed (Stewart Baker) > 7. Re: K3 AM reception (Graham Kimbell (G3TCT)) > 8. Re: Elecraft Web Site - speed (Don Wilhelm) > 9. Re: Elecraft Web Site - speed (Julian, G4ILO) > 10. Elecraft Items For Sale (hims...@basicisp.net) > 11. W1 housing? (Ken Kopp) > 12. Re: Elecraft Web Site - speed (Grant Youngman) > 13. Re: Elecraft Web Site - speed (Darwin, Keith) > 14. Re: W1 housing? (Dave Van Wallaghen) > 15. Re: K3 AM reception (Grant Youngman) > 16. K3 interface to THP 1.5Kfx amp (Jim Spears) > 17. (no subject) (Phil LaMarche) > 18. PEP and forward power about double of set power (Greg Buhyoff) > 19. Downloading K3 Config (Roy Morris) > 20. K3 KDVR3 - Monitoring AF Play (Geoffrey Downs) > 21. Re: PEP and forward power about double of set power > (Julian, G4ILO) > 22. K2 diffuser installation (Bill Miner) > 23. Re: Downloading K3 Config (Julian, G4ILO) > 24. K2 control board U6 pin 29,30 (Mike Weir) > 25. Re: Downloading K3 Config (Dick Dievendorff) > 26. [K3] KPA3 12v Sense Mod Question (Corboy-Poteet) > 27. Re: K3 interface to THP 1.5Kfx amp (Phil & Debbie Salas) > 28. Re: [K3] KPA3 12v Sense Mod Question (Ron D'Eau Claire) > 29. KAT2 question abt voltage at U4, pin7 (kc9...@aol.com) > 30. Re: KAT2 question abt voltage at U4, pin7 (Don Wilhelm) > 31. K3 momentary loss of audio (W7TEA) > 32. K3 RF knob Broken (Ron Hinton) > 33. Re: K3 RF knob Broken (Jay Rodaman) > 34. Re: K3 RF knob Broken (Doug Faunt N6TQS +1-510-655-8604) > 35. Re: K3 RF knob Broken (wayne burdick) > 36. Re: K3 RF knob Broken (Tom Hammond) > 37. KX1 appears dead after KXB3080 PCB installed... ...Help > please! (Shawn Morrow) > 38. Re: K3 AM reception (Gill W4RYW) > 39. Set power and actual measured power all square now (Greg Buhyoff) > 40. Re: Downloading K3 Config (Roy Morris) > 41. K2 power out (John) > 42. Re: KX1 appears dead after KXB3080 PCB installed... ...Help > please! (Don Wilhelm) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 03 Feb 2009 12:12:45 -0500 > From: Ed Steeble <estee...@sc.rr.com> > Subject: Re: [Elecraft] RTTY problem > To: K3_Discussion_Group <elecraft@mailman.qth.net> > Message-ID: <49887b0d.6070...@sc.rr.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > I use Quick Mix <http://www.ptpart.co.uk/quickmix/> to save and restore > my sound card setting. This program has saved me more than once. > 73, Ed > K3IXD > K3 1726 > > > Date: Tue, 03 Feb 2009 15:14:41 +0000 > From: Brian Alsop <als...@nc.rr.com> > Subject: Re: [Elecraft] RTTY problem > To: Elecraft@mailman.qth.net > Message-ID: <49885f61.3090...@nc.rr.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Had the same thing happen after installing the new Google Earth today. I > couldn't figure out what was changed in the audio pannel. Restoring > computer to a state just before the Google Earth install solved the > problem. 73 de Brian/K3KO N1IX wrote: > > > >I am having a problem with receiving RTTY signals. It worked before > so I assume it is something I have set incorrectly. > > >There is no display of anything on any of the RTTY applications. No > waterfall, nothing at all. I have tried different computers and multiple > applications with the same results. I have adjusted the line out item in > the config menu to full scale. > > >I plugged headphones into the line out jack I can hear the RTTY > signal but it seems to be attenuated. Although I don't know how loud it > should be. > > >BTW: transmit doesn't work at all. That will be the subject of > another email. > > >Any help would be appreciated. > > > > > >Dave N1IX > > > > > > ------------------------------ > > Message: 2 > Date: Tue, 3 Feb 2009 09:14:18 -0800 > From: wayne burdick <n...@elecraft.com> > Subject: Re: [Elecraft] ATU Manual Adjust not working ? > To: "CLAS OLOF BERGMAN" <classe.berg...@telia.com> > Cc: Elecraft@mailman.qth.net > Message-ID: <a814d0ed56ced03e99368216627d1...@elecraft.com> > Content-Type: text/plain; charset=US-ASCII; format=flowed > > Hi Clas, > > You must exit the menu after setting KAT3 to LC SET. Only then can you > tap ATU TUNE and make adjustments to L and C. > > I'll make this clearer in the manual. > > 73, > Wayne > N6KR > > On Feb 3, 2009, at 8:24 AM, CLAS OLOF BERGMAN wrote: > > >> Hi, >> >> I just downloaded lastest Firmware MCU 2.80/DSP 1.99 and tried for the >> first >> time to do manual ATU LC adjustments. >> I can not manually change L or C with VFO A or B as it is described in >> the >> manual. After tapping "ATU TUNE", if I turn the VFOs they still just >> scrolls through the menu settings but the radio is displaying a fixed >> L and >> C value. >> > > --- > > http://www.elecraft.com > > > > ------------------------------ > > Message: 3 > Date: Tue, 3 Feb 2009 10:30:42 -0700 > From: "W0MU Mike Fatchett" <w...@w0mu.com> > Subject: [Elecraft] K3 Mods or Updates > To: <elecraft@mailman.qth.net> > Message-ID: <ca4341d2ef5f4984a7d5e057d2c3c...@hamtower> > Content-Type: text/plain; charset="US-ASCII" > > I was just curious if there have been any mods to the K3 Since June of Last > year other than firmware. My unit still needs to have the Mic ground mod > done. > > I ask this as my KRX3 is shipping so I will have the K3 open. > > I downloaded all the new manuals etc. > > Mike W0MU > > > > ------------------------------ > > Message: 4 > Date: Tue, 03 Feb 2009 09:34:25 -0800 > From: Lyle Johnson <k...@wavecable.com> > Subject: Re: [Elecraft] K3 Mods or Updates > To: W0MU Mike Fatchett <w...@w0mu.com> > Cc: elecraft@mailman.qth.net > Message-ID: <49888021.90...@wavecable.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > >> I was just curious if there have been any mods to the K3 Since June of Last >> year other than firmware. >> > > Yes, please see < URL:http://www.elecraft.com/K3/k3_app_notes.htm > > > 73, > > Lyle KK7P > > > ------------------------------ > > Message: 5 > Date: Tue, 3 Feb 2009 09:50:32 -0800 > From: "Mike Scott" <m...@paxsen.com> > Subject: [Elecraft] ATU Manual Adjust not working ? > To: "'CLAS OLOF BERGMAN'" <classe.berg...@telia.com> > Cc: Elecraft@mailman.qth.net > Message-ID: <985060b8bebb4a559992858b71e50...@dbqj5v71> > Content-Type: text/plain; charset="US-ASCII" > > Clas, > > I figured out what I was doing wrong with my manual antenna tuner > adjustment. > > This is how to do it: > > 1. CONFIG KAT3: LC Set > 2. Tap Menu to exit CONFIG menu > 3. Tap ATU TUN > 4. Adjust L and C parameters using VFO knobs > > The key was to exit the menu prior to tapping ATU TUN; the KAT3 will remain > in manual LC Set mode until you change it again. I think possibly exiting > the menu mode was left out of the procedure or I didn't understand what was > written. > > Mike Scott - AE6WA > Tarzana, CA (DM04 / near LA) > K3-100 #508/ KX1 #1311 > > > > > > ------------------------------ > > Message: 6 > Date: Tue, 3 Feb 2009 17:54:28 GMT > From: Stewart Baker <stew...@baker.nildram.co.uk> > Subject: [Elecraft] Elecraft Web Site - speed > To: Elecraft Reflector <elecraft@mailman.qth.net> > Message-ID: <200923175428.121...@shack> > Content-Type: text/plain; charset="iso-8859-1" > > Is it me, or is the Elecraft site very slow to load. > At present it is a bit like kick starting a Snail. > > Stewart G3RXQ > > > ------------------------------ > > Message: 7 > Date: Tue, 3 Feb 2009 17:56:43 -0000 > From: "Graham Kimbell \(G3TCT\)" <g3...@lineone.net> > Subject: Re: [Elecraft] K3 AM reception > To: <n...@yahoo.com>, "Elecraft reflector" <elecraft@mailman.qth.net>, > "Jim Garland" <4cx2...@muohio.edu> > Message-ID: <008f01c98628$c8cd95a0$0602a...@a> > Content-Type: text/plain; charset="utf-8" > > Re the AM quality question I can't detect any "clicking" or other distortion > but then there are no high quality AM BC transmissions round here - they're > messed up either with selective fading or because the transmission comes > from more than one location on the same frequency. > > The noise in between a string of dots is due to AGC PLS=nor. Setting AGC > PLS = off cures it. > > 73 > Graham > ---------------------------------------------- > > From: "Wes Stewart" <n...@yahoo.com> > [snip] > Now it might be argued that these artifacts are at such a low level they > would not be audible as distortion. Maybe, but they represent essentially a > "static" situation. When listening to a string of dots sent with my '870 > the difference between fast and slow AGC is clearly audible. When the > signal is S4 or 5, with fast AGC there is garbage that essentially sounds > like an increased noise level. > > A simple test such as tuning in WWV and listening to the voice ID and > hearing the audio distortion and syllabic "clicking" disappear when simply > turning the AGC off and turning the RG gain down appropriately indicates a > real problem. > > If there are K3s out there that don't do this, then I want one of them. > > Wes N7WS > > > > > > > > > > ------------------------------ > > Message: 8 > Date: Tue, 03 Feb 2009 13:00:08 -0500 > From: Don Wilhelm <w3...@embarqmail.com> > Subject: Re: [Elecraft] Elecraft Web Site - speed > To: Stewart Baker <stew...@baker.nildram.co.uk> > Cc: Elecraft Reflector <elecraft@mailman.qth.net> > Message-ID: <49888628.9050...@embarqmail.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Stewart, > > Look to your internet provider for the problem - the Elecraft site loads > in about 2 seconds here, and no it is not coming from the computer cache > - I tried a page re-load too. > > 73, > Don W3FPR > > Stewart Baker wrote: > >> Is it me, or is the Elecraft site very slow to load. >> At present it is a bit like kick starting a Snail. >> >> Stewart G3RXQ >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> ------------------------------------------------------------------------ >> >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com >> Version: 8.0.233 / Virus Database: 270.10.16/1930 - Release Date: 02/02/09 >> 07:51:00 >> >> >> > > > ------------------------------ > > Message: 9 > Date: Tue, 3 Feb 2009 10:25:34 -0800 (PST) > From: "Julian, G4ILO" <julian.g4...@gmail.com> > Subject: Re: [Elecraft] Elecraft Web Site - speed > To: elecraft@mailman.qth.net > Message-ID: <1233685534660-2264830.p...@n2.nabble.com> > Content-Type: text/plain; charset=us-ascii > > > > > Stewart Baker wrote: > >> Is it me, or is the Elecraft site very slow to load. >> >> > It's you, or possibly your computer. :) It's as quick as anything here. > > ----- > Julian, G4ILO. K2 #392 K3 #222. > http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham > Directory http://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3 > > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.0.233 / Virus Database: 270.10.17/1931 - Release Date: 02/02/09 > 19:21:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html