Re: [Elecraft] FS: Elecraft K3/100, power supply, cables...
SOLD __ Clay Autery, KY5G (318) 518-1389 On 01-Aug-18 10:53, Clay Autery wrote: I am re-listing the following for, and with the authority of Carl Beck, W5BEK: *** Elecraft K3 Transceiver (Serial #5765) as specified below *** PLUS: Adding the PowerWerx SS-30DV power supply to the deal!! PLUS: 2 each UHF to UHF jumpers (Belden 8214 cable stock 11 AWG)) (K3 to amp and amp to tuner) Here are the details on the radio: + K3/100 - K3 100W Transceiver Modular Kit + KAT3 - K3 ATU Modular Kit + KTCX03-1 - K3 TXCO 1ppm f/w correction to 0.5 ppm + KFL3A-2.8K - 2.8 kHz 8 pole roofing filter + KFL3A-2.1K - 2.1 kHz 8 pole roofing filter + KFL3A-1.0K - 1.0 kHz 8 pole roofing filter + KFL3A-400 - 400 Hz 8 pole roofing filter + KUSB - Universal Serial Bus Adapter (RS-232 to USB) + MH-2 Microphone for K3 + K3 Power supply cable - This appears to be a heavier gauge wire than the OE cable. Power Pole x formed/tinned terminal hooks. ++ KSYN3AUPG - KSYN3A Synthesizer Upgrade Kit for K3 ++ KXV3B - RX Ant., 2nd Pre-Amp, IF Out and Xverter Interface upgrade. Adds 2nd preamp for 12,10,6 M This radio was housed in the central air-conditioned portion of a no-smoking home. It has never been taken to the field and is in excellent, lightly used condition. After completion of this "K" version assembly, the unit was subsequently submitted to Elecraft for bench testing and was fully evaluated and calibrated and found to have "met or exceeded all published specs". Between 12 July 2018 and the date of this "For Sale" post, the following maintenance/checks were performed by Clay Autery, KY5G: 1) Upgraded to latest firmware: Version 5.64 2) Thorough internal and external cleaning/detail. 3) Checked for any "loose" fasteners; none found. 3) Full replacement of Main and Sub-RX AF and RF knobs with current production design 4) Brand new LCD bezel 5) Calibrations performed: a) Transmitter Gain: 5W and 50W (will do Milliwatt TX Gain Calibration if needed/on request) b) Reference Oscillator: per method #2, Zero-Beat @ 20 MHz. Dead on; no adjustment required!! c) Front Panel Temperature Sensor: set per manual procedure d) PA Temperature Sensor: set per manual procedure e) S-Meter and RF GAIN Control: set per manual procedure 6) Function check on all bands/SSB/AM/CW This radio is ready to go! High resolution photographs can be viewed here > http://www.montac.com/images/k3_5765/ Original cost for this configuration: $3,355.45 Cost for closest current configuration: $4,229.50 Price: $2,300.00 plus shipping and insurance. Payment via certified funds, check, PayPal. Personal check will be held until clearing. PayPal is price PLUS PP fees. Will be shipped in an Elecraft Factory box/packaging. Inquiries may be made to me directly, off-list, or by phone. 73, __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: Elecraft K3/100, power supply, cables...
I am re-listing the following for, and with the authority of Carl Beck, W5BEK: *** Elecraft K3 Transceiver (Serial #5765) as specified below *** PLUS: Adding the PowerWerx SS-30DV power supply to the deal!! PLUS: 2 each UHF to UHF jumpers (Belden 8214 cable stock 11 AWG)) (K3 to amp and amp to tuner) Here are the details on the radio: + K3/100 - K3 100W Transceiver Modular Kit + KAT3 - K3 ATU Modular Kit + KTCX03-1 - K3 TXCO 1ppm f/w correction to 0.5 ppm + KFL3A-2.8K - 2.8 kHz 8 pole roofing filter + KFL3A-2.1K - 2.1 kHz 8 pole roofing filter + KFL3A-1.0K - 1.0 kHz 8 pole roofing filter + KFL3A-400 - 400 Hz 8 pole roofing filter + KUSB - Universal Serial Bus Adapter (RS-232 to USB) + MH-2 Microphone for K3 + K3 Power supply cable - This appears to be a heavier gauge wire than the OE cable. Power Pole x formed/tinned terminal hooks. ++ KSYN3AUPG - KSYN3A Synthesizer Upgrade Kit for K3 ++ KXV3B - RX Ant., 2nd Pre-Amp, IF Out and Xverter Interface upgrade. Adds 2nd preamp for 12,10,6 M This radio was housed in the central air-conditioned portion of a no-smoking home. It has never been taken to the field and is in excellent, lightly used condition. After completion of this "K" version assembly, the unit was subsequently submitted to Elecraft for bench testing and was fully evaluated and calibrated and found to have "met or exceeded all published specs". Between 12 July 2018 and the date of this "For Sale" post, the following maintenance/checks were performed by Clay Autery, KY5G: 1) Upgraded to latest firmware: Version 5.64 2) Thorough internal and external cleaning/detail. 3) Checked for any "loose" fasteners; none found. 3) Full replacement of Main and Sub-RX AF and RF knobs with current production design 4) Brand new LCD bezel 5) Calibrations performed: a) Transmitter Gain: 5W and 50W (will do Milliwatt TX Gain Calibration if needed/on request) b) Reference Oscillator: per method #2, Zero-Beat @ 20 MHz. Dead on; no adjustment required!! c) Front Panel Temperature Sensor: set per manual procedure d) PA Temperature Sensor: set per manual procedure e) S-Meter and RF GAIN Control: set per manual procedure 6) Function check on all bands/SSB/AM/CW This radio is ready to go! High resolution photographs can be viewed here > http://www.montac.com/images/k3_5765/ Original cost for this configuration: $3,355.45 Cost for closest current configuration: $4,229.50 Price: $2,300.00 plus shipping and insurance. Payment via certified funds, check, PayPal. Personal check will be held until clearing. PayPal is price PLUS PP fees. Will be shipped in an Elecraft Factory box/packaging. Inquiries may be made to me directly, off-list, or by phone. 73, -- __ Clay Autery, KY5G (318) 518-1389 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: Elecraft K3/100
I am listing the following for, and with the authority of Carl Beck, W5BEK: *** Elecraft K3 Transceiver (Serial #5765) as specified below *** + K3/100 - K3 100W Transceiver Modular Kit + KAT3 - K3 ATU Modular Kit + KTCX03-1 - K3 TXCO 1ppm f/w correction to 0.5 ppm + KFL3A-2.8K - 2.8 kHz 8 pole roofing filter + KFL3A-2.1K - 2.1 kHz 8 pole roofing filter + KFL3A-1.0K - 1.0 kHz 8 pole roofing filter + KFL3A-400 - 400 Hz 8 pole roofing filter + KUSB - Universal Serial Bus Adapter (RS-232 to USB) + MH-2 Microphone for K3 ++ KSYN3AUPG - KSYN3A Synthesizer Upgrade Kit for K3 ++ KXV3B - RX Ant., 2nd Pre-Amp, IF Out and Xverter Interface upgrade. Adds 2nd preamp for 12,10,6 M This radio was housed in the central air-conditioned portion of a no-smoking home. It has never been taken to the field and is in excellent, lightly used condition. After completion of this "K" version assembly, the unit was subsequently submitted to Elecraft for bench testing and was fully evaluated and calibrated and found to have "met or exceeded all published specs". Between 12 July 2018 and the date of this "For Sale" post, the following maintenance/checks were performed by Clay Autery, KY5G: 1) Upgraded to latest firmware: Version 5.64 2) Thorough internal and external cleaning/detail. 3) Checked for any "loose" fasteners; none found. 3) Full replacement of Main and Sub-RX AF and RF knobs with current production design 4) Brand new LCD bezel 5) Calibrations performed: a) Transmitter Gain: 5W and 50W (pending Milliwatt TX Gain Calibration; awaiting 50-Ohm, precision terminator for XVTR OUT jack) b) Reference Oscillator: per method #2, Zero-Beat @ 20 MHz. Dead on; no adjustment required!! c) Front Panel Temperature Sensor: set per manual procedure d) PA Temperature Sensor: set per manual procedure e) S-Meter and RF GAIN Control: set per manual procedure 6) Function check on all bands/SSB/AM/CW This radio is ready to go! High resolution photographs can be viewed here > http://www.montac.com/images/k3_5765/ Original cost for this configuration: $3,355.45 Cost for closest current configuration: $4,229.50 *** Price: $2,300.00 plus shipping and insurance. Payment via certified funds, check, PayPal. Personal check will be held until clearing. PayPal is price PLUS PP fees. Will be shipped in an Elecraft Factory box/packaging *** Inquiries may be made to me directly, off-list, or by phone. 73, -- __ Clay Autery, KY5G (318) 518-1389 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: Elecraft K3/100 - PRICE REDUCED
This is an oldie but goodie (s/n 2xx) which has all official mods and enhancements available to this serial number and is fully functional to the latest specs. I am the original owner and the radio has always been in a non-smoking environment. I have a new K3S and this K3 is now excess to my needs. This is the basic K3 with the 5 pole 2.7kHz filter, the latest firmware, and the following options... KPA3100 watt PA KAT3Auto Tuner Module KXV3A Transverter Interface All manuals, update details and documentation, power cord, and hex wrenches are included. Asking $1795 shipped UPS ground to CONUS. Will accept PayPal or USPS Money Order. 73, Ken Wagner K3IU Portsmouth, RI kenk...@cox.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: Elecraft K3/100
This is an oldie but goodie (s/n 2xx) which has all official mods and enhancements available to this serial number and is fully functional to the latest specs. I am the original owner and the radio has always been in a non-smoking environment. I have a new K3S and this K3 is now excess to my needs. This is the basic K3 with the 5 pole 2.7kHz filter, the latest firmware, and the following options... KPA3100 watt PA KAT3Auto Tuner Module KXV3ATransverter Interface All manuals, update details and documentation, power cord, and hex wrenches are included. Asking $1895 shipped UPS ground to CONUS. Will accept PayPal or USPS Money Order. 73, Ken Wagner K3IU Portsmouth, RI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: Elecraft K3/100-F
K3/100-F, s/n 2513, purchased in 2009, has been my backup since 2013. Accessories include KAT3-F tuner KDVR3 - DVR KXV3 - second receiver 2.7KkHz filter in both receivers KXV3 - transverter interface 2011 updates at the factory: New finals K3DSP upgrade K3 Synth stiffener VFO tuning noise mod Extreme signal protection mod KSYN3 DDS mod (x2) KSYN3 ALC mod (x2) Added C101 to front panel Added filter caps to 8v regulator I added the 12v mod so the P3 and PR6 can be powered from the K3 at the same time. Excellent condition, latest firmware loaded. $2995 plus shipping. Please reply via email. 73, Lou, W0FK - St. Louis, MO -- View this message in context: http://elecraft.365791.n2.nabble.com/FS-Elecraft-K3-100-F-tp7614010.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: Elecraft K3/100
This is K3/100 S/N 8164 purchased April 2, 2014 KFL3A 2.8 kHz 8 pole filter KANT3 (no auto-tuner) KXV3A KTCX03-1 1ppm TCXO K144XV-100-K 2 Meter module (16 KHz FM Filter will be necessary to use on FM) Latest Firmware Like new condition, single owner. pictures available. Asking $2475 shipped US. Outside US Buyer pays shipping. PayPal only. 73s Jim, W4ATK jim.w4...@gmail.com (205) 520-4530 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: Elecraft K3/100 and options
I have my K3/100 for sale. K3/100 # 5250 Factory assembled. following options KRX3-F K3 2nd receive rKFL3A-400 - 400 Hz 8-pole IF filter KFL3A-2.1K 2.1khz, 8 pole roofing filter KAT3 - Internal ATU with 2nd Ant KXV3A - RX Ant, IF Out and Xverter Interface KTCX03-1 - High stability reference oscillator Power Cord Original User Manuals New cost nearly $ 4000.00 $3000.00 shipping/ins included in the cont. US Scale of 1-10, a perfect 10 in looks and performance. I also have the Fred Cady Manual included. US Postal money order/Paypal w/fees Pictures available upon request. TIA, 73 Dick __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] FS: Elecraft K3/100 / KRX 3 sub RX
I am simplifying the station, and unwinding the SO2R functionality which I thought I'd enjoy. Turns out, I'm just not interested (or maybe smart enough?) for that category. The rig has always been used in my air-conditioned, non-smoking shack. It's never been mobile, used at someone else's shack, or on Field Day, etc. It's all 9.5/10, at least. This is just about fully loaded. The KRX3 sub receiver provides amazing flexibility, including diversity reception. Original Owner S/N 458 2.8 KHz 1.8 KHz 400 Hz 200 Hz filters KRX3 w/ 2.8 KHz 1.8 Khz 400 Hz 200 Hz filters. * 5-pole filters are factory-matched * KPA3 100 watt PA KAT3 ATU with factory upgraded components KDVR3 Digital Voice Recorder KTCXO3-1 TCXO (0.1 ppm typ) High Stability Ref. Osc. Upgraded KIO3 board K3AFMDKT AF Mod kit installed KXV3 RX Ant. IF Out and Xverter Interface Factory service 12/13/2012 All service records My Price: $3600.00 (New Price: $4460.66) Thanks for reading. 73, Steve NN4X EL98jh __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] FS Elecraft K3/100 y ICOM IC-756PRO 3 kc6...@yahoo.com
yet another scam -- View this message in context: http://elecraft.365791.n2.nabble.com/FS-Elecraft-K3-100-y-ICOM-IC-756PRO-3-kc6wir-yahoo-com-tp7573819p7575662.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] FS Elecraft K3/100 & ICOM IC-756PRO III.
yet another scam -- View this message in context: http://elecraft.365791.n2.nabble.com/FS-Elecraft-K3-100-ICOM-IC-756PRO-III-tp7573126p7575661.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] FS Elecraft K3/100 y ICOM IC-756PRO 3 kc6...@yahoo.com
this is a scam, see other posts for this material -- View this message in context: http://elecraft.365791.n2.nabble.com/FS-Elecraft-K3-100-y-ICOM-IC-756PRO-3-kc6wir-yahoo-com-tp7573821p7575659.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] FS Elecraft K3/100 y ICOM IC-756PRO 3 kc6...@yahoo.com
Possible scammer?? http://forums.qrz.com/showthread.php?390749-Paciana-Benitez-Ashton-now-posing-as-AG6KV Same phone number, different name, different call Deal with him REAL carefully -- View this message in context: http://elecraft.365791.n2.nabble.com/FS-Elecraft-K3-100-y-ICOM-IC-756PRO-3-kc6wir-yahoo-com-tp7573820p7574166.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] FS: Elecraft K3/100
I'm selling my K3/100 (s/n 525, built by N6SF). "Too much inventory" says the XYL! K3/100 *KXV3A RX Ant., IF Out and Xverter Interface* *KTCXO3-1TCXO * *(0.5 ppm typ) High Stability Reference Oscillator **KFL3A-400400 Hz, 8-pole filter* ALL current mods and updates (performed by Elecraft), including the latest firmware (have paperwork from Elecraft) Calibrated and tweaked by Elecraft in August, 2010 Manual rev D8 in hard copy, plus other documentation. Original Box The radio was used this past contest season. All for $2100 (plus shipping from zip code 20015) * -- I also have one each MicroHam DB37-EL-K23 (K2, K3 Front Panel Plug Mic Cable) and DB37-EL-K3R (K3 Rear Panel Mic Cable) $50.00 each) Contact me off-line if interested. Eric W3DQ Washington DC * __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
