For the benefit of those of us without a KXPD3 could you please provide
the pinout information.
73, Bob N7XY
On 8/2/16 2:53 PM, Mike Hagele AC6JA via Elecraft wrote:
From: ac...@aol.com
To: w...@bellsouth.net
Sent: 8/1/2016 8:18:07 P.M. Pacific Daylight Time
Subj: Re: [Elecraft] KX Paddles
Yes.
The digikey part that I purchased is:
http://www.digikey.com/product-search/en?keywords=S-ND
I just straightened out the pins, wrapped the wires around the pins and
soldered and shrink-wrapped the wires for protection.
I used a twisted pair with a ground shield.
I ohmed out the pinouts from my KXPD3 key and hooked up my Begali
Adventure the same way.
You need to be careful though that the Begali Adventure mounting bracket
doesn't put any undue strain on the Digikey connector where it attaches to
the KX3.
You may need to shave off a little of the plastic as the Begali mounting
bracket is slightly larger then the KXPD3.
I am S much happier now with the way the Begali connects to the KX3
and it is such a better key with a much better operating angle than the KXPD3.
Let me know if you need any additional information or have any other
questions.
Thanks.
Mike AC6JA
In a message dated 8/1/2016 7:29:15 P.M. Pacific Daylight Time,
w...@bellsouth.net writes:
Howdy Mike:
That mod for the Adventure paddle is certainly one I would love to know
about plus it would make a great article for the QRP Quarterly.
Do you have any info on how to do the mod?
Many thanks.
73, Joe W2KJ
On Aug 1, 2016, at 9:21 PM, Mike Hagele AC6JA via Elecraft wrote:
The Begali Adventure paddle is the way to go!
I modified my key with a 4-pin plug purchased from Digikey that mounts
and
plugs in to the KX3 just like the KXPD3 does so there is no dangling
cable
that has to plug into the KEY jack on the left side of the radio.
Mike AC6JA
In a message dated 8/1/2016 6:17:25 P.M. Pacific Daylight Time,
sidfriss...@gmail.com writes:
Hi guys
I’m planning on buying a KX3 in the near future. Some time ago someone
on
the reflector said they thought the new KXPD2 paddles were better than
the KXpd3 (less noisy I think he said.) Any pf you who have KX3’s and
now
also KX2 can now make that comparison. So what’s the verdict?
Should I get
the KXPD2 paddles with my KX3? I’d like to hear some opiinions pro or
con. I am mostly a cw op.
Thanks
Sid Frissell, NZ7M
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@n7xy.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
